CCNA 2 Routing and Switching v5.0 Chapter 7

Chapter 7: Routing
Dynamically
Routing & Switching
© 2008 Cisco Systems, Inc. All Presentation_ID rights reserved. Cisco Confidential 1

Chapter 7
7.1 Dynamic Routing Protocols
7.2 Distance Vector Dynamic Routing
7.3 RIP and RIPng Routing
7.4 Link-State Dynamic Routing
7.5 The Routing Table
7.6 Summary
Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 2

Chapter 7: Objectives
 Explain the basic operation of dynamic routing protocols.
 Compare and contrast dynamic and static routing.
 Determine which networks are available during an initial network
discovery phase.
 Define the different categories of routing protocols.
 Describe the process by which distance vector routing protocols
learn about other networks.
 Identify the types of distance-vector routing protocols.
 Configure the RIP routing protocol.
 Configure the RIPng routing protocol.
 Explain the process by which link-state routing protocols learn about
other networks.

Chapter 7: Objectives (cont.)
 Describe the information sent in a link-state update.
 Describe advantages and disadvantages of using link-state routing
protocols.
 Identify protocols that use the link-state routing process. (OSPF, IS-IS)
 Determine the route source, administrative distance, and metric for a
given route.
 Explain the concept of a parent/child relationship in a dynamically
built routing table.
 Compare the IPv4 classless route lookup process and the IPv6
lookup process.
 Analyze a routing table to determine which route will be used to
forward a packet.

Dynamic Routing Protocol Operation
The Evolution of Dynamic Routing Protocols
 Dynamic routing protocols used in networks since the
late 1980s
 Newer versions support the communication based on
IPv6
Routing Protocols Classification

Purpose of Dynamic Routing Protocols
Routing Protocols are used to facilitate the exchange of
routing information between routers.
The purpose of dynamic routing protocols includes:
 Discovery of remote networks
 Maintaining up-to-date routing information
 Choosing the best path to destination networks
 Ability to find a new best path if the current path is no
longer available

Purpose of Dynamic Routing Protocols (cont.)
Main components of dynamic routing protocols include:
 Data structures - Routing protocols typically use tables
or databases for its operations. This information is kept
in RAM.
 Routing protocol messages - Routing protocols use
various types of messages to discover neighboring
routers, exchange routing information, and other tasks
to learn and maintain accurate information about the
network.
 Algorithm - Routing protocols use algorithms for
facilitating routing information for best path
determination.

Purpose of Dynamic Routing Protocols (cont.)

The Role of Dynamic Routing Protocols
Advantages of dynamic routing include:
 Automatically share information about remote networks
 Determine the best path to each network and add this information
to their routing tables
 Compared to static routing, dynamic routing protocols require less
administrative overhead
 Help the network administrator manage the time-consuming
process of configuring and maintaining static routes
Disadvantages of dynamic routing include:
 Part of a router’s resources are dedicated for protocol operation,
including CPU time and network link bandwidth
 Times when static routing is more appropriate

Dynamic verses Static Routing
Using Static Routing
Networks typically use a combination of both static and
dynamic routing.
Static routing has several primary uses:
 Providing ease of routing table maintenance in smaller networks
that are not expected to grow significantly.
 Routing to and from a stub network. A network with only one
default route out and no knowledge of any remote networks.
 Accessing a single default router. This is used to represent a
path to any network that does not have a match in the routing
table.

Using Static Routing (cont.)

Static Routing Scorecard

Dynamic Routing Scorecard

Routing Protocol Operating Fundamentals
In general, the operations of a dynamic routing protocol
can be described as follows:
1. The router sends and receives routing messages on
its interfaces.
2. The router shares routing messages and routing
information with other routers that are using the same
routing protocol.
3. Routers exchange routing information to learn about
remote networks.
4. When a router detects a topology change the routing
protocol can advertise this change to other routers.

Cold Start
 R1 adds the 10.1.0.0
network available
through interface
FastEthernet 0/0 and
10.2.0.0 is available
through interface Serial
0/0/0.
 R2 adds the 10.2.0.0
network available
0/0/0 and 10.3.0.0 is
available through
interface Serial 0/0/1.
 R3 adds the 10.3.0.0
network available
0/0/1 and 10.4.0.0 is
available through
interface FastEthernet
0/0.
Routers running RIPv2

Network Discovery
R1:
 Sends an update about
network 10.1.0.0 out the
Serial0/0/0 interface
FastEthernet0/0 interface
 Receives update from
R2 about network
10.3.0.0 with a metric of
1
 Stores network 10.3.0.0
in the routing table with a
metric of 1

Network Discovery (cont.) R2:
Serial 0/0/0 interface
 Receives an update from
R1 about network 10.1.0.0
with a metric of 1
 Stores network 10.1.0.0 in
the routing table with a
metric of 1
R3 about network 10.4.0.0
with a metric of 1
 Stores network 10.4.0.0 in
Routers running RIPv2 metric of 1

Network Discovery (cont.) R3:
FastEthernet0/0
R2 about network
10.2.0.0 with a metric of
1
 Stores network 10.2.0.0
metric of 1

Exchanging the Routing Information
R1:
network 10. 1. 0. 0 out the
networks 10. 2. 0. 0 and 10.
3. 0. 0 out the
 Receives an update from R2
about network 10. 4. 0. 0
with a metric of 2
 Stores network 10. 4. 0. 0 in
metric of 2
 Same update from R2
contains information about
network 10. 3. 0. 0 with a
metric of 1. There is no
change; therefore, the
routing information remains
the same

Exchanging the Routing Information (cont.)
R2:
networks 10. 3. 0. 0 and 10.
4. 0. 0 out of Serial 0/0/0
interface
networks 10. 1. 0. 0 and 10.
2. 0. 0 out of Serial 0/0/1
interface
about network 10. 1. 0. 0.
There is no change;
therefore, the routing
information remains the
same.
about network 10. 4. 0. 0.
There is no change;
therefore, the routing
information remains the
same.

Exchanging the Routing Information (cont.)
R3:
network 10. 4. 0. 0 out the
networks 10. 2. 0. 0 and
10. 3. 0. 0 out the
R2 about network 10. 1. 0.
0 with a metric of 2
 Stores network 10. 1. 0. 0
metric of 2
 Same update from R2
contains information about
network 10. 2. 0. 0 with a
metric of 1. There is no
change; therefore, the
routing information remains
the same.

Achieving Convergence
The network is converged when all routers have complete and accurate
information about the entire network:
 Convergence time is the time it takes routers to share information,
calculate best paths, and update their routing tables.
 A network is not completely operable until the network has
converged.
 Convergence properties include the speed of propagation of routing
information and the calculation of optimal paths. The speed of
propagation refers to the amount of time it takes for routers within the
network to forward routing information.
 Generally, older protocols, such as RIP, are slow to converge,
whereas modern protocols, such as EIGRP and OSPF, converge
more quickly.

Types of Routing Protocols
Classifying Routing Protocols

IGP and EGP Routing Protocols
Interior Gateway
Protocols (IGP) -
 Used for routing
within an AS
 Include RIP, EIGRP,
OSPF, and IS-IS
Exterior Gateway
Protocols (EGP) -
 Used for routing
between AS
 Official routing
protocol used by the
Internet

Distance Vector Routing Protocols
Distance vector IPv4 IGPs:
 RIPv1 - First generation
legacy protocol
 RIPv2 - Simple distance
vector routing protocol
 IGRP - First generation
Cisco proprietary
protocol (obsolete)
 EIGRP - Advanced
version of distance
vector routing
For R1, 172.16.3.0/24 is one hop
away (distance). It can be reached
through R2 (vector).

Distance Vector or Link-State Routing Protocols
Distance vector protocols use
routers as sign posts along the
path to the final destination.
A link-state routing protocol is like having a complete
map of the network topology. The sign posts along
the way from source to destination are not
necessary, because all link-state routers are using
an identical map of the network. A link-state router
uses the link-state information to create a topology
map and to select the best path to all destination
networks in the topology.

Link-State Routing Protocols
Link-state IPv4 IGPs:
 OSPF - Popular
standards based routing
protocol
 IS-IS - Popular in
provider networks.

Classful Routing Protocols
Classful routing protocols do not send subnet mask
information in their routing updates:
 Only RIPv1 and IGRP are classful.
 Created when network addresses were allocated based
on classes (class A, B, or C).
 Cannot provide variable length subnet masks (VLSMs)
and classless interdomain routing (CIDR).
 Create problems in discontiguous networks.

Classless Routing Protocols
Classless routing protocols include subnet mask information
in the routing updates:
 RIPv2, EIGRP, OSPF, and IS_IS
 Support VLSM and CIDR
 IPv6 routing protocols

Routing Protocol Characteristics

Routing Protocol Metrics
A metric is a measurable value that is assigned by the
routing protocol to different routes based on the
usefulness of that route:
 Used to determine the overall “cost” of a path from
source to destination.
 Routing protocols determine the best path based on
the route with the lowest cost.

Distance Vector Routing Protocol Operation
Distance Vector Technologies
Distance vector routing protocols:
 Share updates between neighbors
 Not aware of the network topology
 Some send periodic updates to
broadcast IP 255.255.255.255 even if
topology has not changed
 Updates consume bandwidth and
network device CPU resources
 RIPv2 and EIGRP use multicast
addresses
 EIGRP will only send an update when
topology has changed

Distance Vector Routing Protocol Operation
Distance Vector Algorithm
RIP uses the Bellman-Ford algorithm as its routing
algorithm.
IGRP and EIGRP use the Diffusing Update Algorithm
(DUAL) routing algorithm developed by Cisco.

Types of Distance Vector Routing Protocols
Routing Information Protocol
Updates
use
UDP
port 520
RIPng is based on RIPv2 with a 15 hop limitation and the
administrative distance of 120
Routing
updates
broadcasted
every 30
seconds

Types of Distance Vector Routing Protocols
Enhanced Interior-Gateway Routing Protocol
EIGRP:
 Is bounded
triggered updates
 Uses a Hello
keepalives
mechanism
 Maintains a
topology table
 Supports rapid
convergence
 Is a multiple
network layer
protocol support

Configuring the RIP Protocol
Router RIP Configuration Mode
Advertising Networks

Examining Default RIP Settings

Enabling RIPv2

Disabling Auto Summarization
 Similarly to RIPv1, RIPv2 automatically summarizes
networks at major network boundaries by default.
 To modify the default RIPv2 behavior of automatic
summarization, use the no auto-summary router
configuration mode command.
 This command has no effect when using RIPv1.
 When automatic summarization has been disabled,
RIPv2 no longer summarizes networks to their classful
address at boundary routers. RIPv2 now includes all
subnets and their appropriate masks in its routing
updates.
 The show ip protocols now states that automatic
network summarization is not in effect.

Configuring Passive Interfaces
Sending out unneeded
updates on a LAN impacts the
network in three ways:
 Wasted Bandwidth
 Wasted Resources
 Security Risk

Propagating a Default Route

Configuring the RIPng Protocol
Advertising IPv6 Networks

Examining the RIPng Configuration

Examining the RIPng Configuration (cont.)

Link-State Routing Protocol Operation
Shortest Path First Protocols

Link-State Routing Protocol Operation
Dijkstra’s Algorithm

Link-State Updates
Link-State Routing Process

Link-State Updates
Link and Link-State
The first step in the link-state routing process is that
each router learns about its own links and its own
directly connected networks.

Link-State Updates
Say Hello
The second step in the link-state routing process is that
each router is responsible for meeting its neighbors on
directly connected networks.

Link-State Updates
Say Hello
The third step in the link-state routing process is that each router builds
a link-state packet (LSP) containing the state of each directly
connected link.
1. R1; Ethernet network
10.1.0.0/16; Cost 2
2. R1 -> R2; Serial point-to-point
network;
10.2.0.0/16; Cost 20
network;
10.7.0.0/16; Cost 5
network;
10.4.0.0/16; Cost 20

Link-State Updates
Flooding the LSP
The fourth step in the link-state routing process is that each router
floods the LSP to all neighbors, who then store all LSPs received in a
database.

Link-State Updates
Building the Link-State Database
The final step in the link-state routing process is that each router uses
the database to construct a complete map of the topology and
computes the best path to each destination network.

Link-State Updates
Building the SPF Tree

Link-State Updates
Adding OSPF Routes to the Routing Table

Why Use Link-State Routing Protocols
Why Use Link-State Protocols?

Why Use Link-State Protocols?

Disadvantages of Link-State Protocols

Protocols that Use Link-State
There are only two link-state routing protocols:
 Open Shortest Path First (OSPF) most popular
• began in 1987
• two current versions
• OSPFv2 - OSPF for IPv4 networks
• OSPFv3 - OSPF for IPv6 networks
 IS-IS was designed by International Organization for
Standardization (ISO )

Parts of an IPv4 Route Entry
Routing Table Entries

Directly Connected Entries

Remote Network Entries

Dynamically Learned IPv4 Routes
Routing Table Terms
Routes are discussed
in terms of:
 Ultimate route
 Level 1 route
 Level 1 parent route
 Level 2 child routes

Ultimate Route
An ultimate route
is a routing table
entry that
contains either a
next-hop IP
address or an
exit interface.
Directly
connected,
dynamically
learned, and link
local routes are
ultimate routes.

Level 1 Route

Level 1 Parent Route

Level 2 Child Route

The Routing Table
Route Lookup Process
1. If the best match is a level 1 ultimate route, then this route is used
to forward the packet.
2. If the best match is a level 1 parent route, proceed to the next
step.
3. The router examines child routes (the subnet routes) of the parent
route for a best match.
4. If there is a match with a level 2 child route, that subnet is used to
forward the packet.
5. If there is not a match with any of the level 2 child routes, proceed
to the next step.

The Routing Table
Route Lookup Process (cont.)
6. The router continues searching level 1 supernet routes in the
routing table for a match, including the default route, if there is
one.
7. If there is now a lesser match with a level 1 supernet or default
routes, the router uses that route to forward the packet.
8. If there is not a match with any route in the routing table, the
router drops the packet.

The IPv4 Route Lookup Process
Best Route = Longest Match

The IPv4 Route Lookup Process
IPv6 Routing Table Entries
 Components of the IPv6 routing table are very similar to
the IPv4 routing table (directly connected interfaces,
static routes, and dynamically learned routes).
 IPv6 is classless by design, all routes are effectively
level 1 ultimate routes. There is no level 1 parent of
level 2 child routes.

Analyze an IPVv6 Routing Table
Directly Connected Entries

Analyze an IPVv6 Routing Table
Remote IPv6 Network Entries

Chapter 7: Summary
Dynamic routing protocols:
 Used by routers to automatically learn about remote networks from
other routers
 Purpose includes: discovery of remote networks, maintaining up-to-date
routing information, choosing the best path to destination
networks, and ability to find a new best path if the current path is no
longer available
 Best choice for large networks but static routing is better for stub
networks.
 Function to inform other routers about changes
 Can be classified as either classful or classless, distance-vector or
link-state, and an interior or an exterior gateway protocol

Chapter 7: Summary (cont.)
 A link-state routing protocol can create a complete view or topology
of the network by gathering information from all of the other routers
 Metrics are used to determine the best path or shortest path to reach
a destination network
 Different routing protocols may use different (hops, bandwidth,
delay, reliability, and load)
 Show ip protocols command displays the IPv4 routing protocol
settings currently configured on the router, for IPv6, use show ipv6
protocols

Chapter 7: Summary (cont.)
 Cisco routers use the administrative distance value to determine
which routing source to use
 Each dynamic routing protocol has a unique administrative value,
along with static routes and directly connected networks, lower is
preferred the route
 Directly connected networks are preferred source, followed by static
routes and then various dynamic routing protocols
 An OSPF link is an interface on a router, information about the state
of the links is known as link-states
 Link-state routing protocols apply Dijkstra’s algorithm to calculate the
best path route which uses accumulated costs along each path, from
source to destination, to determine the total cost of a route

CCNA 2 Routing and Switching v5.0 Chapter 7

Recommended

More Related Content

What's hot (20)

Similar to CCNA 2 Routing and Switching v5.0 Chapter 7 (20)

Recently uploaded (20)

CCNA 2 Routing and Switching v5.0 Chapter 7