CCNA 2 Routing and Switching v5.0 Chapter 4

Chapter 4: Routing
Concepts
Routing & Switching
© 2008 Cisco Systems, Inc. All Presentation_ID rights reserved. Cisco Confidential 1

Chapter 4
4.0 Routing Concepts
4.1 Initial Configuration of a Router
4.2 Routing Decisions
4.3 Router Operation
4.4 Summary
Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 2

Chapter 4: Objectives
 Configure a router to route between multiple directly connected
networks
 Describe the primary functions and features of a router.
 Explain how routers use information in data packets to make
forwarding decisions in a small- to medium-sized business network.
 Explain the encapsulation and de-encapsulation process used by
routers when switching packets between interfaces.
 Compare ways in which a router builds a routing table when
operating in a small- to medium-sized business network.
 Explain routing table entries for directly connected networks.
 Explain how a router builds a routing table of directly connected
networks.

Chapter 4: Objectives (cont.)
 Explain how a router builds a routing table using static routes.
 Explain how a router builds a routing table using a dynamic routing
protocol.

Functions of a Router
Characteristics of a Network

Why Routing?
The router is responsible for the routing of traffic
between networks.

Routers are Computers
Routers are specialized computers containing the
following required components to operate:
• Central processing unit (CPU)
• Operating system (OS) - Routers use Cisco IOS
• Memory and storage (RAM, ROM, NVRAM, Flash, hard
drive)

Routers are Computers
Routers use specialized ports and network interface
cards to interconnect to other networks.

Routers Interconnect Networks
 Routers can connect multiple networks.
 Routers have multiple interfaces, each on a different
IP network.

Routers Choose Best Paths
 Routers use static routes and dynamic routing protocols
to learn about remote networks and build their routing
tables.
 Routers use routing tables to determine the best path to
send packets.
 Routers encapsulate the packet and forward it to the
interface indicated in routing table.

Routers Choose Best Paths

Packet Forwarding Methods
 Process switching – An older
packet forwarding mechanism
still available for Cisco routers.
 Fast switching – A common
packet forwarding mechanism
which uses a fast-switching
cache to store next hop
information.
 Cisco Express Forwarding
(CEF) – The most recent,
fastest, and preferred Cisco
IOS packet-forwarding
mechanism. Table entries are
not packet-triggered like fast
switching but change-triggered.

Connect Devices
Connect to a Network

Connect Devices
Default Gateways
To enable network access
devices must be configured
with the following IP address
information
IP address - Identifies a
unique host on a local
network.
Subnet mask - Identifies
the host’s network
subnet.
Default gateway -
Identifies the router a
packet is sent to to when
the destination is not on
the same local network
subnet.

Connect Devices
Document Network Addressing
Network Documentation should include at least the following in a topology
diagram and addressing table:
 Device names
 Interfaces
 IP addresses and
subnet mask
 Default gateways

Connect Devices
Enable IP on a Host
Statically Assigned IP address – The host is manually assigned
an IP address, subnet mask and default gateway. A DNS server IP
address can also be assigned.
• Used to identify specific network resources such as
network servers and printers.
• Can be used in very small networks with few hosts.
Dynamically Assigned IP Address – IP Address information is
dynamically assigned by a server using Dynamic Host
Configuration Protocol (DHCP).
• Most hosts acquire their IP address information through
DHCP.
• DHCP services can be provided by Cisco routers.

Connect Devices
Device LEDs

Connect Devices
Console Access
Console access requires:
• Console cable – RJ-45-to-DB-9 console cable
• Terminal emulation software – Tera Term, PuTTY,
HyperTerminal

Connect Devices
Enable IP on a Switch
 Network infrastructure devices require IP addresses to enable
remote management.
 On a switch, the management IP address is assigned on a
virtual interface.

Basic Settings on a Router
Configure Basic Router Settings
Basics tasks that should be first configured on a Cisco Router and
Cisco Switch:
 Name the device – Distinguishes it from other routers
 Secure management access – Secures privileged EXEC, user
EXEC, and Telnet access, and encrypts passwords to their
highest level
 Configure a banner – Provides legal notification of
unauthorized access.
 Save the Configuration

Configure an IPv4 Router Interface
To be available, a router
interface must be:
 Configured with an address and
subnet mask .
 Must be activated using no
shutdown command. By default
LAN and WAN interfaces are
not activated.
 Serial cable end labeled DCE
must be configured with the
clock rate command.
 Optional description can be
included.

Configure an IPv6 Router Interface
To configure interface with IPv6
address and subnet mask:
 Use the ipv6 address ipv6-
address/ipv6-length [link-local | eui-
64]interface configuration command.
 Activate using the no shutdown
command.
IPv6 interfaces can support more than
one address:
 Configure a specified global unicast -
ipv6-address /ipv6-length
 Configure a global IPv6 address with
an interface identifier (ID) in the low-order
64 bits - ipv6-address /ipv6-
length eui-64
 Configure a link-local address - ipv6-
address /ipv6-length link-local

Configure a Loopback Interface
A loopback interface is a
logical interface that is
internal to the router:
 It is not assigned to a
physical port, it is
considered a software
interface that is
automatically in an UP
state.
 A loopback interface is
useful for testing.
 It is important in the OSPF
routing process.

Verify Connectivity of Directly Connected Networks
Verify Interface Settings
Show commands are used
to verify operation and
configuration of interface:
 show ip interfaces brief
 show ip route
 show running-config
Show commands are used
to gather more detailed
interface information:
 show interfaces
 show ip interfaces

Verify Interface Settings
Some of the common
commands to verify the IPv6
interface configuration are:
 show ipv6 interface brief -
displays a summary for each
of the interfaces.
 show ipv6 interface
gigabitethernet 0/0 -
displays the interface status
and all the IPv6 addresses for
this interface.
 show ipv6 route - verifies
that IPv6 networks and
specific IPv6 interface
addresses have been
installed in the IPv6 routing
table.

Filter Show Command Output
Show command output can be managed using the following command and
filters:
 Use the terminal length number command to specify the number of lines
to be displayed. A value of 0 (zero) prevents the router from pausing
between screens of output.
 To filter specific output of commands use the (|)pipe character after show
command. Parameters that can be used after pipe include:
section, include, exclude, begin

Command History Feature
The command history feature temporarily stores a list of executed
commands for access:
 To recall commands press Ctrl+P or the UP Arrow.
 To return to more recent commands press Ctrl+N or the Down
Arrow.
 By default, command history is enabled and the system captures
the last 10 commands in the buffer. Use the show history
privileged EXEC command to display the buffer contents.
 Use the terminal history size user EXEC command to increase or
decrease size of the buffer.

Switching Packets between Networks
Router Switching Functions

Send a Packet

Forward to the Next Hop

Packet Routing

Reach the Destination

Path Determination
Routing Decisions

Path Determination
Best Path
Best path is selected by a routing protocol based on
the value or metric it uses to determine the distance
to reach a network:
 A metric is the value used to measure the distance to a given
network.
 Best path to a network is the path with the lowest metric.
Dynamic routing protocols use their own rules and
metrics to build and update routing tables:
 Routing Information Protocol (RIP) - Hop count
 Open Shortest Path First (OSPF) - Cost based on cumulative
bandwidth from source to destination
 Enhanced Interior Gateway Routing Protocol (EIGRP) - Bandwidth,
delay, load, reliability

Path Determination
Load Balancing
When a router has two or more paths to a destination with
equal cost metrics, then the router forwards the packets
using both paths equally:
• Equal cost load balancing can improve network
performance.
• Equal cost load balancing can be configured to use
both dynamic routing protocols and static routes.
• RIP, OSPF and EIGRP support equal cost load
balancing.

Path Determination of the route
Administrative Distance
If multiple paths to a destination are configured on a router, the path
installed in the routing table is the one with the lowest Administrative
Distance (AD):
• A static route with an AD of 1 is more reliable than an EIGRP-discovered
route with an AD of 90.
• A directly connected route with an AD of 0 is more reliable than a
static route with an AD of 1.

The Routing Table
The Routing Table
A routing table is a file stored in RAM that contains
information about:
 Directly connected routes
 Remote routes
 Network or next hop associations

The Routing Table
Routing Table Sources
The show ip route command is used to display the
contents of the routing table:
 Local route interfaces - Added to the routing table
when an interface is configured. (displayed in IOS 15 or
newer)
 Directly connected interfaces - Added to the routing
table when an interface is configured and active.
 Static routes - Added when a route is manually
configured and the exit interface is active.
 Dynamic routing protocol - Added when EIGRP or
OSPF are implemented and networks are identified.

The Routing Table
Routing Table Sources

The Routing Table
Remote Network Routing Entries
Interpreting the entries in the routing table.

Directly Connected Routes
Directly Connected Interfaces
A newly deployed router, without any configured interfaces, has an
empty routing table. An active, configured, directly connected interface
creates two routing table entries:
 Link Local (L)
 Directly Connected (C)

Directly Connected Example
A routing table
with the directly
connected
interfaces of R1
configured and
activated.

Directly Connected IPv6 Example
The show ipv6 route command shows the ipv6 networks and routes
installed in the routing table.

Statically Learned Routes
Static Routes
Static routes and default static routes can be implemented after
directly connected interfaces are added to the routing table:
 Static routes are manually configured
 They define an explicit path between two networking devices.
 Static routes must be manually updated if the topology changes.
 Their benefits include improved security and control of resources.
 Configure a static route to a specific network using the ip route
network mask {next-hop-ip | exit-intf} command.
 A default static route is used when the routing table does not contain
a path for a destination network.
 Configure a default static route using the ip route 0.0.0.0
0.0.0.0 {exit-intf | next-hop-ip} command.

Default Static Routes Example

Static Routes Example

Static IPv6 Routes Example

Dynamic Routing Protocols
Dynamic Routing
Dynamic routing is used by routers to share information about the
reachability and status of remote networks. It performs network
discovery and maintains routing tables.

IPv4 Routing Protocols
Cisco ISR routers can support a variety of dynamic IPv4
routing protocols including:
 EIGRP – Enhanced Interior Gateway Routing Protocol
 OSPF – Open Shortest Path First
 IS-IS – Intermediate System-to-Intermediate System
 RIP – Routing Information Protocol

Cisco ISR routers can support a variety of dynamic IPv6 routing
protocols including:
 RIPng - RIP next generation
 OSPFv3
 EIGRP for IPv6
 MP-BGP4 - Multicast Protocol-Border Gateway Protocol

Chapter 4: Summary
 There are many key structures and performance-related
characteristics referred to when discussing networks: topology,
speed, cost, security, availability, scalability, and reliability.
 Cisco routers and Cisco switches have many similarities. They
support a similar modal operating system, similar command
structures, and many of the same commands.
 One distinguishing feature between switches and routers is the type
of interfaces supported by each.
 The main purpose of a router is to connect multiple networks and
forward packets from one network to the next. This means that a
router typically has multiple interfaces. Each interface is a member
or host on a different IP network.

Chapter 4: Summary (cont.)
 The routing table is a list of networks known by the router.
 A remote network is a network that can only be reached by
forwarding the packet to another router.
 Remote networks are added to the routing table in two ways: either
by the network administrator manually configuring static routes or by
implementing a dynamic routing protocol.
 Static routes do not have as much overhead as dynamic routing
protocols; however, static routes can require more maintenance if
the topology is constantly changing or is unstable.
 Dynamic routing protocols automatically adjust to changes without
any intervention from the network administrator. Dynamic routing
protocols require more CPU processing and also use a certain
amount of link capacity for routing updates and messages.

Chapter 4: Summary (cont.)
 Routers make their primary forwarding decision at Layer 3, the
Network layer. However, router interfaces participate in Layers 1, 2,
and 3. Layer 3 IP packets are encapsulated into a Layer 2 data link
frame and encoded into bits at Layer 1.
 Router interfaces participate in Layer 2 processes associated with
their encapsulation. For example, an Ethernet interface on a router
participates in the ARP process like other hosts on that LAN.
 Components of the IPv6 routing table are very similar to the IPv4
routing table. For instance, it is populated using directly connected
interfaces, static routes and dynamically learned routes.

CCNA 2 Routing and Switching v5.0 Chapter 4

Recommended

More Related Content

What's hot (20)

Similar to CCNA 2 Routing and Switching v5.0 Chapter 4 (20)

Recently uploaded (20)

CCNA 2 Routing and Switching v5.0 Chapter 4