Unit I_Computer Networks_2.ppt

Computer Networking
By Vinod Sencha
Core Faculty(IS), RTI Jaipur

Course Content
 Networks: Basic concepts
 Uses of networks in sharing of resources, Backups
 Common types of networks; LAN/WAN/Internet,
Server based networks, client server model, P2P
 Network media
 Wireless networks.
 Threats to networks
 The internet world
 Cloud and Cloud Computing

The Computer Network
 A computer network is a group of computers/devices(Nodes)
that use a set of common communication protocols over digital
interconnections for the purpose of sharing resources located on
or provided by the network nodes.
 The nodes of a computer network may include personal
computers, servers, networking hardware, or other specialised or
general-purpose hosts.
 The interconnections between nodes are formed from a broad
spectrum of telecommunication network technologies, based on
physically wired, optical, and wireless technologies.
 A communication protocol is a set of rules for exchanging
information over a network. physically wired, optical, and
wireless

The Network Diagram
(Click on the Words Below and Learn More About Each Component)
The Internet
Other LANS
Firewall
Router
Fiber Optic Network Cable
Server
PC
Wireless Network
Wired Network
Switch

The Advantages/Uses of Network
Simultaneous Access
 There are moments in any business when several workers
may need to use the same data at the same time.
Shared Peripheral Devices
Personal Communications
 Videoconferencing
 Voice over Internet Protocol (VoIP):-VoIP transmits the sound
of voice over a computer network using the Internet Protocol
(IP ) rather than sending the signal over traditional phone
wires
Easier Data Backup

The Networking Devices(Nodes)
1. NIC Card
2. Repeater
3. Hub
4. Switch
5. Bridge
6. Router
7. Gateway
8. Firewall

1. Network Interface Card
 NIC is used to physically
connect host devices to the
network media.
 A NIC is a printed circuit board
that fits into the expansion slot
of a bus on a computer
motherboard.
 It can also be a peripheral
device. NICs are sometimes
called network adapters.
 Each NIC is identified by a
unique code called a Media
Access Control (MAC) address.
 This address is used to control
data communication for the host
on the network.

2. Repeaters
 A repeater is a network device used to
regenerate a signal.
 Repeaters regenerate analog or digital
signals that are distorted by transmission
loss due to attenuation.
 A repeater does not make an intelligent
decision concerning forwarding packets

3. Hubs
 Hubs concentrate on connections.
 In other words, they take a group
of hosts and allow the network to
see them as a single unit. This is
done passively, without any other
effect on the data transmission.
 Active hubs concentrate hosts and
also regenerate signals.

4. Bridges
 Bridges convert network data
formats and perform basic data
transmission management.
 Bridges provide connections
between LANs.
 They also check data to
determine if it should cross the
bridge. This makes each part of
the network more efficient

5. Switches
 Switches add more intelligence to data transfer management.
 They can determine if data should remain on a LAN and
transfer data only to the connection that needs it.
 Another difference between a bridge and switch is that a
switch does not convert data transmission formats

6. Routers
 Routers have all the capabilities listed
above.
 Routers can regenerate signals,
concentrate multiple connections,
convert data transmission formats, and
manage data transfers.
 They can also connect to a WAN, which
allows them to connect LANs that are
separated by great distances.

7. Gateway
 A gateway is a piece of networking
hardware used in
telecommunications for
telecommunications networks that
allows data to flow from one discrete
network to another.
 Gateways are distinct from routers
or switches in that they
communicate using more than one
protocol to connect a bunch of
networks

8. Firewall
 A firewall is a network device or
software for controlling network
security and access rules.
 Firewalls are inserted in connections
between secure internal networks
and potentially insecure external
networks such as the Internet.
 Firewalls are typically configured to
reject access requests from
unrecognized sources while allowing
actions from recognized ones.
 The vital role firewalls play in network
security grows in parallel with the
constant increase in cyber attacks.

Network Media
The function of the media is to carry a flow of information through a LAN.
A. Wired Media:- A widely adopted family that uses copper and fiber media in
local area network (LAN) technology are collectively known as Ethernet
1. Copper Cable
a. Coaxial Cables
b. Shielded Twisted Pair(STP)
c. Unshielded Twisted Pair
2. Fibre Optic Cable
B. Wireless Media:- use the atmosphere, or space, as the medium.

1. Copper Cable
 The most common, easiest, quickest,
and cheapest form of network media to
install.
 The disadvantage of sending data over
copper wire is that the further the signal
travels, the weaker it becomes.

a. Coaxial Cable
 It can be run longer distances than Twisted pair Cables.
• Speed: 10-100Mbps
• Cost: Inexpensive
• Media and connector size: Medium
• Maximum cable length: 500m

b. Shielded Twisted Pair(STP)
• Speed: 0-100Mbps
• Cost: Moderate
• Media and connector size: Medium to large
• Maximum cable length: 100m

c. Unshielded Twisted Pair
 UTP is a four-pair wire
medium used in a variety of
networks.
 Each of the eight copper
wires in the UTP cable is
covered by insulating material
Speed: 10-100-1000 Mbps*
Cost: Least Expensive
Media and connector size: Small
Maximum cable length: 100m * (Depending
on the quality/category of cable)

UTP Implementation
 EIA/TIA specifies an RJ-45 connector
for UTP cable.
 The letters RJ stand for registered jack.

Fiber Optic Cable
 Glass fiber carrying light pulses, each
pulse a bit.
 Based on the Total Internal Reflection
of Light.
 High-speed point-to-point
transmission 10-100’s Gbps
 low error rate:
 repeaters spaced far apart
 immune to electromagnetic
noise

Communication Protocols
Internet Protocol Suite
 Also called TCP/IP, is the foundation of all modern networking.
 It defines the addressing, identification, and routing
specifications for IPv4 and for IPv6.
 It is the defining set of protocols for the Internet.
IEEE 802
 It is a family of IEEE standards dealing with local area networks
and metropolitan area networks.
 They operate mostly at levels 1 and 2 of the OSI model.
Ethernet
 It is a family of protocols used in wired LANs, described by a set
of standards together called IEEE 802.3

Communication Protocols
Wireless LAN
 It is standardized by IEEE 802.11 and shares many properties with wired
Ethernet.
SONET/SDH
 Synchronous optical networking (SONET) and Synchronous Digital
Hierarchy (SDH) are standardized multiplexing protocols that transfer
multiple digital bit streams over optical Fibre using lasers.
Asynchronous Transfer Mode(ATM)
 It uses asynchronous time-division multiplexing and encodes data into
small, fixed-sized cells.
 Good choice for a network that handle both traditional high-throughput
data traffic, and real-time, low-latency content such as voice and video.

Types of Networks
1. Personal Area Network (PAN)
2. Local Area Network (LAN)
3. Campus Area Network (CAN)
4. Metropolitan Area Network (MAN)
5. Wide Area Network (WAN)
6. Storage-Area Network (SAN)
7. Virtual Private Network (VPN)
8. Client Server Network
9. Peer to Peer Network (P2P)

1. Personal Area Network
1. Personal Area Network (PAN) is a
computer network used for data
transmission amongst devices
such as computers, telephones,
tablets and personal digital
assistants.
2. Also Known as HAN (Home Area
Network)
3. PANs can be used for
communication amongst the
personal devices themselves
(interpersonal communication), or
for connecting to a higher level
network and the Internet (an
uplink) where one "master" device
takes up the role as internet router.

2. Local Area Network
 Xerox Corporation worked in
collaboration with DEC and
Intel to create Ethernet, which
is the most pervasive LAN
architecture used today.
 Ethernet has evolved and has
seen significant improvements
in regard to speed and
efficiency.
 An upside of a LAN is fast data transfer with data speed that can reach
up to 10Gbps.
 Other significant LAN technologies are Fiber Distributed Data Interface
(FDDI) and token ring.

3. Campus Area Network
 Larger than LANs, but smaller
than metropolitan area networks
these types of networks are
typically seen in universities,
large K-12 school districts or
small businesses.
 They can be spread across
several buildings that are fairly
close to each other so users can
share resources

4. Metropolitan Area Network
1. A MAN is larger than a LAN but smaller than or equal in size to a WAN.
2. The size range anywhere from 5 to 50km in diameter.
3. MANs are typically owned and managed by a single entity.
4. This could be an ISP or telecommunications company that sells its services
to end-users in that metropolitan area.
5. For all intents and purposes, a MAN has the same characteristics as a WAN
with distance constraints.

5. Wide Area Network
• A Wide Area Network exist over a large area
• Data travels through telephone or cable lines
• Usually requires a Modem
• The world’s largest Wide Area Network in the Internet

6. Storage Area Network
 SAN may be referred to as a Sub network or special purpose network.
 Its special purpose is to allow users on a larger network to connect
various data storage devices with clusters of data servers.
 SANs can be accessed in the same fashion as a drive attached to a
server.

7. Virtual Private Network
 VPN is a private network that can
access public networks remotely. VPN
uses encryption and security protocols
to retain privacy while it accesses
outside resources.
 When employed on a network, VPN
enables an end user to create a virtual
tunnel to a remote location. Typically,
telecommuters use VPN to log in to
their company networks from home.
 Authentication is provided to validate the identities of the two peers.
 Confidentiality provides encryption of the data to keep it private from
prying eyes.
 Integrity is used to ensure that the data sent between the two devices or
sites has not been tampered with.

8. Client/Server Network
 In a client/server arrangement,
network services are located on a
dedicated computer called a server.
 The server responds to the requests
of clients.
 The server is a central computer that
is continuously available to respond
to requests from clients for file, print,
application, and other services.
 Most network operating systems adopt the form of a client/server
relationship.
 Typically, desktop computers function as clients, and one or more
computers with additional processing power, memory, and specialized
software function as servers.

9. Peer to Peer Network
 Usually very small networks
 Each workstation has equivalent capabilities and responsibilities
 Does not require a switch or a hub.
 These types of networks do not perform well under heavy data
loads.

Network Topologies
Network topology defines the structure of the network.
A. Physical topology:- It define the actual layout of the wire or media.
1. Bus
2. Ring
3. Star
4. Tree(Hierarchical)
5. Mesh
B. Logical topology:- It defines how the hosts access the media to send data.
1. Broadcast
2. Token passing
C. Hybrid Topology

1. Bus Topology
T
T
All devices are connected to a central
cable, called bus or backbone.
There are terminators at each end of
the bus that stops the signal and
keeps it from traveling backwards.
Disadvantages:
1. It is possible that more than one station may
attempt transmission simultaneously (collision or
contention).
2. Difficult reconfiguration and fault isolation.
3. A fault or break in the bus cable stops all
transmission, even between devices on the same
side of the problem.
4. The damaged area reflects signals in the direction
of origin, creating noise in both directions
Advantages:
1. There is no central controller.
2. Control resides in each station
3. The less interconnecting wire is
required.
4. Ease of installation.
5. Backbone cable can be laid along the
most efficient path, and then
connected to the nodes by drop lines
of various lengths

2. Ring Topology
• All devices are connected to one another in the shape
of a closed loop.
• Each device is connected directly to two other devices,
one on either side of it.
Advantages:
1. Avoids the collisions that are possible in the bus topology.
2. Each pair of stations has a point-to-point connection.
3. A signal is passed along the ring in one direction, from device to
another, until it reaches its destination.
4. Each device incorporates a repeater.
5. Relatively easy to install and reconfigure.
6. Fault isolation is simplified.
Disadvantages:
1. A break in the ring (such as station disabled) can disable the entire
network.
2. Unidirectional traffic.

3. Star Topology
• All devices are connected to a central hub.
• Nodes communicate across the network by passing data
through the hub or switch.
Advantages:
1. Easy to install and reconfigure.
2. Robustness, if one link fails; only that link is affected. All other
links remain active.
3. Easy fault identification and isolation. As long as the hub is
working, it can be used to monitor link problems and bypass
defective links.
Disadvantages:
1. The devices are not linked to each other.
2. If one device wants to send data to another, it sends it to the
controller, which then relays the data to the other connected device.

4. Tree/Hierarchical Topology
Advantages:
1. It allows more devices to be attached to a
single central hub and can therefore increase
the distance a signal can travel between
devices.
2. It allows the network to isolate and prioritize
communications from different computers.
Disadvantages:
1. The devices are not linked to each other.
2. If one device wants to send data to another,
it sends it to the controller, which then relays
the data to the other connected device.
3. The addition of secondary hubs brings two
further advantages.

6. Mesh Topology
Each host has its connections to all other hosts.
Mesh topology is implemented to provide as much
protection as possible from interruption of service.
1. A nuclear power plant might use a mesh
topology in the networked control systems.
2. Although the Internet has multiple paths to any
one location, it does not adopt the full mesh
topology.
Disadvantages:
1. A large amount of cabling required.
2. A large amount of I/O ports required.
3. Installation and reconfiguration are
difficult.
4. The sheer bulk of the wiring can be
greater than the available space (in the
walls, ceiling, or floors) can accommodate.
5. The hardware required to connect each
link (I/O ports and cables) can be
prohibitively expensive.
Advantages:
1. The use of dedicated links guarantees that each
connection can carry its data load, thus eliminating
the traffic problems that can occur when links must
be shared by multiple devices.
2. It is robust, if one link becomes unusable, it does
not incapacitate (affect) the entire system.
3. Privacy and Security (every message sent travels
along a dedicated line; only the intended recipient
sees it).
4. Point-to-point links make fault identification and
fault isolation easy.

Wireless Networks
Wireless network is a type of
computer network that uses
wireless data connections for
connecting network nodes.
Example
Bluetooth
Wi-Fi

Bluetooth
 Bluetooth is a short-range
wireless technology standard
used for exchanging data
between fixed and mobile
devices over short distances.
 It is using UHF radio waves in
the ISM bands, from 2.402
GHz to 2.48 GHz.
 The IEEE standardized
Bluetooth as IEEE 802.15.1,
but no longer maintains the
standard.

Wi-Fi
 Wi-Fi Stands for Wireless Fidelity.
 Wi-Fi, is a Local Area Wireless
technology.
 Wi-Fi networks use radio technologies to
transmit and receive data at high speed.
 It is based on the IEEE 802.11 family of
standards.
 Access point: The access point is a wireless
LAN transceiver or “ base station” that can
connect one or many wireless devices
simultaneously to the internet

The Internet
The simplest
definition
of the
Internet is
that it's a
network of
computer
networks
How Information Travel Through the Internet
A page on the Internet—whether it's full of words, images or
both—doesn't come to you in one shipment. It's translated
into digital information, chopped into 1500 byte pieces called
PACKETS, and sent to you like a puzzle that needs to be
reassembled. Each part of the packet has a specific
function:
Header
Provides the
complete
destination
address for the
packet
Data Block
The portion of the overall information
carried by the packet
Sequence ID
ID’s where the information
belongs in relation to the rest
of the information
End of Message
ID’s the end of the
packet

The Internet
How Information Travel Through the Internet
When you connect to a Web site through an ISP and start exchanging information,
there isn't a fixed connection between your computer and the Web server computer
hosting the Web site. Instead, information is exchanged using the best possible path
at that particular time. Special computers called routers determine these paths,
avoiding slow links and favoring fast ones.
Your
Computer ISP Routers
Web
Servers

Cloud Computing
 Cloud computing is Internet-based
computing, whereby shared resources,
software, and information are provided to
computers and other devices on demand, like
the electricity grid.
 A Cloud is a type of parallel and distributed
system consisting of a collection of
interconnected and virtualized computers
that are dynamically provisioned and
presented as one or more unified computing
resources based on service-level agreements
established through negotiation between the
service provider and consumers.

IaaS
Infrastructure as a Service – IaaS
 The capability provided to the consumer is to provision processing,
storage, networks, and other fundamental computing resources
where the consumer is able to deploy and run arbitrary software,
which can include operating systems and applications.
 The consumer does not manage or control the underlying cloud
infrastructure but has control over operating systems, storage,
deployed applications, and possibly limited control of select
networking components .
Examples :
Amazon EC2
Eucalyputs
OpenNebula
… etc

PaaS
Platform as a Service – PaaS
 The capability provided to the consumer is to deploy onto the cloud
infrastructure consumer-created or acquired applications created
using programming languages and tools supported by the provider.
infrastructure including network, servers, operating systems, or
storage, but has control over the deployed applications and possibly
application hosting environment configurations.
Examples :
Microsoft Windows Azure
Google App Engine
Hadoop(High Availability Distributed Object Oriented Platform)
… etc

SaaS
Software as a Service – SaaS
 The capability provided to the consumer is to use the provider’s
applications running on a cloud infrastructure. The applications are
accessible from various client devices through a thin client interface
such as a web browser (e.g., web-based email).
infrastructure including network, servers, operating systems, storage,
or even individual application capabilities, with the possible exception
of limited user-specific application configuration settings.
Examples :
Google Apps (e.g., Gmail, Google Docs, Google sites, …etc)

Cloud-Deployment Model
There are four primary cloud deployment models :
1. Public Cloud
2. Private Cloud
3. Community Cloud
4. Hybrid Cloud
Homogeneous
Public Cloud Private Cloud
Infrastructure Homogeneous Heterogeneous
Policy Model Common defined Customized & Tailored
Resource
Model
Shared & Multi-tenant Dedicated
Cost Model Operational expenditure Capital expenditure
Economy
Model
Large economy of scale End-to-end control

Unit I_Computer Networks_2.ppt

Recommended

More Related Content

What's hot (20)

Similar to Unit I_Computer Networks_2.ppt (20)

More from Arumugam90 (20)

Recently uploaded (20)

Unit I_Computer Networks_2.ppt