IRJET - Automobile Enhanced Security System using LabVIEW based on IoT

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 08 Issue: 01 | Jan 2021 www.irjet.net p-ISSN: 2395-0072
© 2021, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 25
Automobile Enhanced Security System using LabVIEW based on
IoT
S. Sai Vardhan1, G. Divya2
1Department of ECE, KLEF-Deemed to be University, Guntur, A.P., India,
2B.Tech Department of ECE, KLEF-Deemed to be University, Guntur, A.P., India
--------------------------------------------------------------------------***-----------------------------------------------------------------------
Abstract— The automotive industry has experienced
rapid changes over the last two decades. It has been a
radical icon of society today for a few days now. Today,
car safety is one of our society's most daunting problems
and also a very critical aspect. Many sensors and
equipment are used for all these protection systems, but
the cost to implement is growing very high. The design
process of an embedded system will be addressed in this
project, which would be used to prevent/control the
theft of a vehicle in public places. The model for
production will be based on an embedded GSM
technology framework. The key theme of this project is
the virtual control of the protection system by means of
software that will be operated by the microcontroller
through the driver circuit. The solenoid valve will drive
the driver's circuit. The activation and deactivation of
the solenoid valve will therefore be regulated by the
microcontroller. By entering the keyword, the password
is given to the approved person of the vehicle (owner
and driver) to start it. The usually closed solenoid opens
if he enters the keyword, and the vehicles are ready to
start. If an unauthorized individual enters the password,
the device will send a warning message to the approved
person to secure their car. A warning sound will be
provided by an alarm connected to the device. It is
possible to simulate this project using the platform
LABVIEW.
The main objective of the project is to successfully
deploy wireless technology in car environments through
IoT Technology in the event of a robbery proposal. In the
online age of things.
Key words— GSM, LabVIEW
1. INTRODUCTION
In all areas of society, the protection infrastructure has
been improved. There have also been several rapid
improvements to car safety, but the expenses of these
security enhancements are too large and not affordable
for all ownership of vehicles. The purpose of the project
is to provide the best safety solution for cars at an
affordable price. The LabVIEW platform has been
integrated through this to create a more safe and user-
friendly vehicle security framework. Generally, the
notion of igniting the engine with the air is used, the
spark in the engine used to ignite an engine may be
avoided by blocking the air flow to the engine. A cost
efficient and highly secure system is the cost of
integrating this smart security system with LabVIEW
software. The machine user interface is all that basic and
can be easily understood by all individuals. In the fuel
injector of the car, the main process of this method takes
place and so there will be effective.
The Internet of Things (IoT) is indeed a virtualization
technology of objects or objects that are embedded in
electronics, software, sensors, and network links, such as
computers, houses, vehicles, and perhaps other
structures, allowing these structures or objects to collect
and share information. A high level of human-to-machine
communications including machine-to-machine
communications is expected to build the Internet of
Things. Reducing human labor is the ultimate purpose of
this initiative. In protection systems, automation always
has been a primary consideration. In the project, our
goal is to develop and implement a safety system. The
Network of Things is the network of inanimate
components or "things" embedded with software,
measurements and networking for electronics to allow
the manufacturer, operator and/or other connected
services to produce significant encouragement and
guidance by exchanging data. Via its semiconductor
manufacturing device, each thing is uniquely
recognizable but may communicate within it. The
existing internet infrastructure. IOT is usually required
to provide advanced computer, system and service
connectivity that goes beyond communication from
machine to machine and covers a range of protocols,
jurisdictions and implementations. In nearly all fields,
the interconnection of these embedded devices is
considered successful in development, while still
allowing advanced applications such as a smart grid.
With the assistance of various current technologies,
these devices collect useful data and then autonomous
robots flow the data between other advanced
technologies.
2. Related work & problems to be addressed
2.1) Available surveys
A lot of testing has been conducted to explore the
different aspects of autonomous vehicle technology to
date, but most of these studies concentrate on a specific
feature of autonomous vehicles to the best of our
understanding, and no survey shows a complete
approach to autonomous vehicle technology. Our study
dates back more than eight years (2010-date). In urban
areas, Campbell al. studied real-world autonomous car
experiments and identified in depth the difficulties they

encountered during the test. A comprehensive analysis
of the use of high performance driving (ADAS) vehicles
in private vehicles has been performed by Okuda et al.
Policy guidelines and private vehicle implementation
were evaluated by Dear et al. Similarly, some of the
problems related to the different independent vehicle
policies are discussed by Baylee et al. Other work-related
research involves the preparation and monitoring of
private vehicle movement, the construction of long-term
maps of private vehicles private vehicles and visual
perceptions of private vehicles from the point of
Implementation insight and user experience. In addition,
Abraham et al. conducted research on customer
confidence and expectations in private car technology,
and Joy et al. modified privacy problems in private cars
for location communications. Parkinson et al. keep
cyber-attacks on private vehicles fully updated. We see
that the most recent study on private cars has been
cantered on particular private car issues since the
previous debate. [2].
2.2) Different situations:
The dynamic articles typically block each other in
significant circumstances because of which the basic
item can only be incompletely visible. For these rather
visible documents, identifiable facts and isolation are
difficult. [3].
2.3) Direction of vehicle movement:
Since vehicles are 3-dimensional objects, they typically
have different appearances from the modified or
survivable point of vision. In particular, the accuracy of
classifiers depends on the highlights we have used,
which therefore depends rather entirely on the stage.
The best model is to consider the front view and side
view of a bicycle rider's appearance.
3. LITERATURE SURVEY
3.1 Paper-1
A special type of network that comes from a mobile
advertising network (MANET) is a vehicular ad hoc
network (VANET) and is organized in a fully methodical
manner. It is attractively built and includes moving cars.
Communication on VANETs enables the development of
road and road links across a wide variety of short and
long wireless technologies. Effective traffic control,
traffic congestion, and protection and convenience for
drivers are other excellent applications of VANETs.
These networks have been a viable area of study for both
industry and academia since their inception. For limited
services or temporary projects, such as avoiding traffic
congestion and accident prevention, VANETs are
suitable. However, VANETs have limited time
applications because of their lack of functionality and
communication skills in handling worldwide data
obtained from other vehicles and systems. Vehicles on
VANETs need to link to a broad range of modern
applications for Facilities, the Internet and people. The
Internet of Vehicles (IoV) or Internet of Connected
Vehicles (IoCV) is the name of these transformed
VANETs, which closely fits the Internet of Things (IoT)
paradigm. Each network company can act as a "smart"
system in IoV and can enjoy ubiquitous Internet
connectivity that enables individuals, artifacts, cars,
networks and infrastructure to be integrated to build a
smart network that supports a variety of services in
major cities or infrastructure. The Nations (eg smart
system). City, conditions on the road, safety). According
to a recent report, by 2021, billions of objects, many of
which are vehicles, will be linked to the World wide web.
The IOV links vehicles and living organisms to allow
them to send and receive data. IoV networking is
available in three categories: car-to-car (V2V), car-to-
infrastructure (V2I), and car-to-cloud (V2C). In the
implementation of mobile cities, IOV has played an
important role by business performance management
functionality, benefits of real-time vehicle management
information, and by controlling Drivers' and passengers'
protection. The rapid pace of IoV growth, however,
generates many safety concerns that are considered a
serious threat to both industrial and consumer lives. As a
consequence, more comprehensive research on possible
safety risks and different strategies that can ensure the
safety of passengers and industry is urgently needed. In
this paper, we will address the different types of attacks
that motor vehicles can face, as well as alternatives to
some or all of these solutions can affect overall
performance.
3.2 PAPER-2
The LabVIEW platform has been integrated through this
to create a more safe and user-friendly vehicle security
framework. Generally, the notion of igniting the engine
with the air is used, the spark in the engine used to ignite
an engine may be avoided by blocking the air flow to the
engine. A cost efficient and highly secure system is the
cost of integrating this smart security system with
LabVIEW software. The machine user interface is all that
basic and can be easily understood by all individuals. In
the fuel injector of the car, the main process of this
method takes place and so there will be effective. The
Internet of Things (IoT) is indeed a virtualization
technology of objects or objects that are embedded in
electronics, software, sensors, and network links, such as
computers, houses, vehicles, and perhaps other
structures, allowing these structures or objects to collect
and share information. A high level of human-to-machine
communications including machine-to-machine
communications is expected to build the Internet of
Things. Reducing human labor is the ultimate purpose of
this initiative. In protection systems, automation always
has been a primary consideration. In the project, our
goal is to develop and implement a safety system. The
Network of Things is the network of inanimate
components or "things" embedded with software,

measurements and networking for electronics to allow
the manufacturer, operator and/or other connected
services to produce significant encouragement and
guidance by exchanging data. Via its semiconductor
manufacturing device, each thing is uniquely
recognizable but may communicate within it. The
existing internet infrastructure. IOT is usually required
to provide advanced computer, system and service
connectivity that goes beyond communication from
machine to machine and covers a range of protocols,
jurisdictions and implementations. In nearly all fields,
the interconnection of these embedded devices is
considered successful in development, while still
allowing advanced applications such as a smart grid.
With the assistance of various current technologies,
these devices collect useful data and then autonomous
robots flow the data between other advanced
technologies.
3.3 PAPER-3
This paper focus on today’s world of comfort and luxury,
various high priced costly vehicles are available. Many of
these vehicles have been launched with inbuilt security
systems. However, even though a huge amount of capital
is being invested in areas of vehicle security, the cases of
vehicle theft is still rising.
In the global or local climate, a brilliant automotive
safety system means giving people the power to
intelligently and naturally monitor vehicles. Several
existing approaches focused on automotive safety
frameworks are based on numerous developments, but
involve safety and do not improve individuals at all. The
manufacture of different car safety devices has no
concern for whether they are basic or new production, in
response to the concept of car burglary. Standard
automobile safety features, for example, two-wheeled
car keys and four-wheeled vehicle-friendly modules,
were successfully provided by the designers. In any
event, the safety features offered by the engineers at this
time are not guaranteed; if they are to be genuinely
protected, there should be more protection.
3.4 PAPER-4
According to Interpol, organized vehicle crimes
contribute to theft and trafficking of vehicles involving
personal property, insurance firms and public safety in
all countries and are, in most cases, connected to larger
networks of organized crime. In order to deter theft of
vehicles, we need to introduce new systems based on
new technology to help police and vehicle owners
monitor, regulate, recover vehicles in the event of
robbery and detention, such as the proposed system,
Vehicle monitoring and IoT-based communication
module can be easily analyzed to monitor, control the
automobile in real time and suggest clear details about
the nearby government buildings, then identify the best
damn thing and accessible modes of communication to
reach the spot.
Several existing approaches focused on automotive
safety frameworks are based on numerous
developments, but involve assurance and do not improve
individuals at all. The manufacture of different car safety
devices has no concern for if they are indeed basic or
new production, in response to the concept of car
burglary. Standard automobile safety features, for
example, two-wheeled car keys and four-wheeled
vehicle-friendly modules, were provided effective by the
manufacturers.
A convolutional neural network (CNN) is a variety of
feed-forward neural network that implements the back
propagation algorithm. It trains it high-level features
from the primary data like images. The current
accomplishment of convolutional neural networks is in
their ability to extract inter-dependent information from
the input images i.e centralization of the pixels which are
highly sensitive compared to other pixels. The
convolutional neural network training consists of
different convolution layers, relu layers max-pooling
layers, fully connected layers, and a loss function (e.g.
SVM/Softmax) on the last (fully-connected) layer these
layers are liable for the detection, classification, and
evaluating of objects in images. In the preliminary layers
we obtain the edge information of the input images
familiar to some of the algorithms but, In the
penultimate layers, we start obtaining texture and ridge
information which helps us in evaluating sensitive
information useful for the classification of objects in
images into different classes based on their sizes and
category(moving or not).
Fig 1 Architecture of Automobile security

4. Analysis of security systems
Increasingly marked by corporate mergers and
mergers, the global car industry The relocation of
manufacturing centres to developed economies is in the
grip of a The worldwide price-war. The industry is
subject to imperfect competition that has resulted in
imperfect competition. Too much of it all, too much skill,
too many rivals and too much Overlapping and
redundancy. The industry is concerned with the
demands of the market for styling, Security together
comfort; and with the productivity of labour relations
and production with this one, this project provides car
safety using new technology to open the car door and
fasten the seat belt. These two situations satisfy the user
to start igniting the car. Similarly to protect our
valuables from window intruders and the problem of
drag. This study provides an overview of the various
studies previously conducted to perform this function.
The Internet-based anti-theft tracking system is
designed to provide all owners with an effective service.
The analysis explores growth patterns, changes in
ownership structures, trade structures, meaning,
Patterns and position of selected Asian countries'
governments (i.e. China, India, Indonesia and Thailand)
in the world of cars.
Thailand is a big country exporting vehicles from Asia.
The sector is mainly linked to Japanese FDI oriented. The
Chinese automotive industry is rising very quickly and is
poised to quite early on, with an especially strong dent in
the foreign trade arena, in the part field, location. On the
other hand, India is consolidating its stance with high
demand both domestically and internationally.
Indonesia's automobile industry is In essence, a
production sector regulated by a major Japanese
automotive industry.
Which developed nations examined are making efforts to
develop their cars Sector via different routes with overt
and indirect state control through various routes
Initiatives for recent technologies and economic reform.
Policies of the government against Liberalization of
investment has given the selected countries considerable
benefits as private countries With modern technology,
players stepped in and FDI began to flood in, mainly
through the Japanese automotive majors' paws.
Multiple states have adopted various strategies to fix the
issue of excess capacity. In that business. The Japanese
encouraged market restructuring through mergers and
mergers Procurement while Indians were looking for a
global market. Governments in all these countries
Policies have been aimed at developing the indigenous
automotive industry by reinforcing national players
when Thailand was completely concentrated on the
export market By Japanese firms. Expertise in the
automotive industry is becoming increasingly
component, as they are finding their niche in each of
these countries. China specializes in components and
India in components. Two seaters and tiny bikes, pick-up
trucks and commercial vehicles in Thailand and in work
trucks in Indonesia. Thailand exports to developing
nations and Reinforcement of its role in ASEAN. Thailand
is also growing its economic ties with Indonesia. From
ASEAN. Besides traditional India, India concentrates on
the Middle East and South Asia. Destinations for
developing countries. With the radical opening up of the
part industry, the task now is for individual governments
to promote the growth of domestic production.
Providers of essential components and sub-systems by,
interiliac, enhancement in the Climate for investment,
better patent regimes and R&D rewards.
Fig 2 Block diagram of security system
5. LabVIEW
We have used LabVIEW because it offers a graphical
programming approach that will help Click-through
button to help you visualize all aspects of your
application, including hardware configuration, rating
data, and debugging. This seems to make it easier to
integrate measurement hardware from any vendor, to
represent a complex concept in a diagram, to develop
data analysis algorithms, and to customize user interface
design.
The name LabVIEW is an abbreviation of its meaning:
Laboratory Virtual Instrument Engineering Workbench.
LABVIEW is the language of the visual system: it is a
platform for the system development and development
environment that was intended to allow all types of
system development.

Fig 3 Example of panel in LabVIEW
The LabVIEW environment also programming also
includes examples and the documents required for the
back ground running applications. This will benefit on
one side, but there is also a certain danger of neglecting
professionalism in the context. It is very important that a
developer possess a very good and extensive knowledge
of the special LabVIEW syntaxes and the memory
management of the topology. The advanced type of the
LabVIEW development systems offer the capability to
build standalone applications.
Moreover it is real and possible to applications of
distributed which communicate by a client server of the
devices and hence it is very easy develop and implement
due to inherit the nature of parallel G.
6. Result and Discussion
Fig 4 simulated circuit of security system
Fig 5 Temperature control circuit
7. Conclusion and Future work
We can monitor the theft of vehicles and provide a more
reliable system for the car industry at a very reasonable
cost by deploying our process in real time. This
protection method is very convenient that can be used
by every viable tool. Continuing IoT and its studies in the
field Implementation in full or in part will strengthen the
Standard of living. "Thus the proposed "IoT Based"
project Vehicle System' will be at the level of protection
A step forward and seek to close all of the gaps Which
are already in current technology. The validation reveals
the advanced vehicle system based on IOT is practical.
And they can automatically regulate fraud. The Time of
Answer The delay is therefore lower. This advanced
vehicle system, based on IOT, User protection by seat
belt compulsion is allowed, key less Method of locking /
unlocking to drive the vehicle. Furthermore, it provides
protection from car towing and robbery to the above, via
a windshield in the driver. For automobiles, the device is
perfect, It can also be used for other automobiles by the
use of those the parts and components used in this
company. Based on IOT the autonomous driving system
provides maximum performance, Convenience,
protection & continuity. It is an ideal strategy for car
users.
Reference papers
[1] Jr., William M. Assistant Examiner: Ganjoo, Peter on
Anti-theft system for use with unattended and attended
vehicles comprising: a base microprocessor, IEEE.
[2] Zhen-hua Wang, Xue-ping Zhang, Ge-fei Yu, Yuan-fu
Lin, Lei Chen, "A New Automobile Anti-interference
Alarm System Based on Signal Detecting Technique to
Design and Implement," iccsee, vol. 1, pp.310-312, 2012
International Conference on Computer Science and
Electronics Engineering, 2012

[3] Goel and V. Gruhn, “Fleet Monitoring System for
Advanced Tracking of Commercial Vehicles”,
Proceedings of the2006 IEEE International Conference
on Systems, Man, and Cybernetics (SMC 2006), pp. 2517-
2522, Taipei, Taiwan,08.10.2006-11.10.2006.
[4] Chia-Hung Lien, Chi-Hsiung Lin, Ying-WenBai, Ming-
Fong Liu and Ming-Bo Lin, 2006 IEEE Tenth
International Symposium on Consumer Electronics (ISCE
2006), St. Petersburg, Russia, pp. 7-12, June 28-July 1,
2006.
[5] E. D. Kalpan, Understanding GPS: Principles and
Applications, Artech house Publishers, ISBN
0890067937, February 1996. “Implementation of GSM
based Commercial Automobile Tracker Using PIC
18F452”Proceedings of 2009 IEEE student conference
on Research and development (SCOReD 2009), 16-18
Nov, 2009, UPM Serdang, Malaysia.
[6] M. McDonald, H. Keller, J. Klijnhout and V. Mauro,
“Intelligent Transport Systems in Europe: Opportunity
for Future Research”World Scientific Publishing
Company, ISBN 981270082X, 2006.Muhammad Ali
Mazidi, Janice Gillespie, Mckinlay, Rolin D., “ The
Microcontroller in Embedded System.
[7] Raj Kamal, “Embedded System- Architecture,
Programming and Design”, Tata McGraw Hill Publisher,
2nd edition, 2008.
[8] Junaid Ali, ShaibNasim, Taha Ali, Naveed Ahmed and
syed Riaz un Nabi, “Implementation of GSM based
Commercial Automobile Tracker Using PIC 18F452 and
Development of Google Earth Embedded Monitoring
Software” Proceedings2009 IEEE student.
[9] Jayanta Kumar Pany1 & R. N. Das
ChoudhuryEmbedded Automobile Engine Locking
System, Using GSM TechnologyB.G. Nagaraja, Ravi
Rayappa, M. Mahesh, Chandrasekhar M. Patil, Dr. T.C.
Manjunath:- “Design & Development of a GSM Based
Vehicle Theft Control System” 978-0-7695-35166/
08©2008 IEEE, DOI10.1109 /ICACC.2009.
[10] M. Abuzalata, M. Momani, S. Fayyad and S. Abu-
Ein," A Practical Design of Anti-Theft Car
Protection System Based on Microcontroller,".
American Journal of Applied Sciences, 9(5), 709, 2012.
[11] O. Kaiwartya, A. Abdullah, Y. Cao, A. Altameem, M.
Prasad, C. Lin AND X.
[12] Liu, "Internet of Vehicles: Motivation, Layered
Architecture, Network Model, Challenges, and Future
Aspects," IEEE Access, 2016.
[13] A. M. Salman, " Cloud Based Vehicle Tracking
System Using GPRS," College of Information
Engineering, Al-Nahrain University, Iraq, Baghdad, 2020.
[14] D. A. Bahr and O. A. Awad, “LTE Based Vehicle
Tracking and Anti-Theft System Using Raspberry Pi
Microcontroller,” College of Information Engineering, Al-
Nahrain University, Iraq, Baghdad, 2019.
[15] P. Chandra Shreyas, R. Roopalakshmi, Kaveri B. Kari,
R. Pavan, P. Kirthy and P. N. Spoorthi, " IoT Based
Framework for Automobile Theft Detection and Driver
Identification,” Springer Nature Singapore Pte Ltd., 2019.
[16] T. Attar, P. Chavan, V. Patel, M. Gupta, and D.
Mukhopadhyay, & quot; An Attempt to Develop an IoT
based Vehicle Security System," International
Symposium on Smart Electronic Systems, IEEE, 2018.
[17] K. Shruthi, P. Ramaprasad, R. Ray, A. N. Manjunath
and S. Pansari. " Design of an anti-theft vehicle
tracking system with a smartphone application,"
International Conference on Information Processing
(ICIP), pp. 755-760. IEEE, 2015.
[18] M. S. Uddin, Md. M. Ahmed, J. B. Alam, and M. Islam,
“Smart anti-theft vehicle tracking system for Bangladesh
based on Internet of Things,” 4th Int. Conf. Adv. Electr.
Eng. ICAEE, vol. 5, pp. 624–628, 2017.
[19] S. N. Paing, M. Z. Oo, M. Othman, and N. Funabiki,
"A Personal Use Vehicle Anti-Theft

IRJET - Automobile Enhanced Security System using LabVIEW based on IoT

Recommended

More Related Content

What's hot (19)

Similar to IRJET - Automobile Enhanced Security System using LabVIEW based on IoT (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET - Automobile Enhanced Security System using LabVIEW based on IoT