INTERFERENCE-AWARE CHANNEL ASSIGNMENT FOR MAXIMIZING THROUGHPUT IN WMN

International Journal on AdHoc Networking Systems (IJANS) Vol. 1, No. 1, July 2011
1
INTERFERENCE-AWARE CHANNEL ASSIGNMENT
FOR MAXIMIZING THROUGHPUT IN WMN
Vinay Kapse and Ms. U.N. Shrawankar
Department of Computer Science and Engineering, G.H. Raisoni College of
Engineering, Nagpur, India
vinaykapse82@gmail.com
urmilas@rediffmail.com
ABSTRACT
Wireless Mesh network (WMN) is dynamically self-organizing and self-configured, with the nodes in the
network automatically establishing an ad-hoc network and maintaining the mesh connectivity. The ability
to use multiple-radios and multiple channels can be cashed to increase aggregate throughput of wireless
mesh network. Thus the efficient use of available interfaces and channels without interference becomes
the key factor. In this paper we propose interference aware clustered based channel assignment schemes
which minimizes the interference and increases throughput. In our proposed scheme we have given
priority to minimize interference from nearby mesh nodes in interference range than maximizing channel
diversity. We simulated our proposed work using NS-3 and results show that our scheme improves
network performance than BFSCA and Distributed Greedy CA.
KEYWORDS
IEEE 802.11s, Channel assignment, Multi-channel, Multi-radio, Channel diversity.
1. INTRODUCTION
Wireless Mesh Network (IEEE 802.11s) are dynamically self-organizing and self-configured,
with the nodes in the network automatically establishing an ad-hoc network and maintaining the
mesh connectivity. The wireless mesh network consists of mesh clients, mesh routers also called
as mesh nodes and mesh gateways. Wireless mesh network has mesh clients such as laptops,
smart phone and other wireless devices. The mesh routers are wireless routers that provide a
routing functionality to and from wireless clients to internet gateways. Mesh routers also
provide reliable, redundant and strong network backbone for providing internet services to mesh
clients. Mesh gateways provide internet and high speed broadband connectivity to mesh clients
through routers. Wireless mesh network have been subject of interest for research communities
and wireless industries due to infrastructure less easy deployment, self organizing and self-
configuring feature applicable in metropolitan areas. Through multi-hop communication, a large
coverage area can be benefited by mesh routers with lower transmission power. Most of the
routers have minimal mobility.
Multi-Channel Multi-Radio communication, fixed mobility model in mesh network diversify
the capabilities of ad-hoc networks. These features bring many advantages to WMNs, such as
low up-front cost, easy network maintenance, robustness, reliable service coverage, etc.
Therefore wireless mesh network is widely accepted in the traditional application scenarios such

2
as broadband home networking, community networking, building automation, high speed
metropolitan area networks, and enterprise networking.
Wireless mesh network are similar to in concept with mobile ad hoc network with some
important differences and with less constraints as compared to ad hoc network which can be
exploited. The main difference is that the nodes of WMN are not mobile or with negligible
mobility. These avoid frequent topology changes and link failures. Topology changes are
caused only if new nodes are added or due to node failures or power offing mesh routers for
maintenance purposes. The traffic is always concentrated on the links originating and
terminating to mesh gateways. More over flow characteristics do not change frequently. This
characteristic can be used to optimize network traffic based on previous traffic statistics. All
Mesh clients in wireless mesh network try to gain access to internet. Thus most of the traffic is
directed to and from mesh gateways saturating channels at gateways. So allocating the non
interfering channels at links near gateways can considerably increase network throughput.
The IEEE 802.11s standard is designed to work in compatibility with IEEE 802.11 a/b/g
physical standards. The IEEE 802.11b has 12 overlapping channels (Channel 0..11) and 3 non-
overlapping channels (CH-1, CH-6, CH-11).Where as IEEE 802.11a/g has 12 non-overlapping
channels. These non-overlapping channels can be operated in the 2.4 GHz band in
neighbourhood of each other without causing interference. Interference between the
neighbourhood channels results in increase in end-to-end delay, increase in retransmission and
hence decrease in overall throughput. The use of multiple channels proves to be good effort to
decrease this interference. But the use of multiple channels in a single radio environment can
lead to the considerably large channel switching time among channels and hence a delay in the
transmission. Switching an interface from one channel to another incurs delay. For example,
wireless NICs are currently available that support both IEEE 802.11a and IEEE 802.11b and
can switch between the two bands, However with the currently available hardware, switching
across bands incurs a large delay, but the switching delay is expected to reduce in the future. To
overcome this use of multi-radio NICs are recommended to be used at mesh nodes of mesh
network.
The rest of the paper is structured as follows. In Section II related work is discussed. In Section
III we describe different network model for channel assignment. In Section IV we will show
simulation results and finally we will conclude paper.
2. RELATED WORK
Many approaches were proposed in the past to increase capacity by reducing interference on
wireless links. In one type of these approach, focused on the use of multiple non-overlapping
channels over a single wireless network interface card [4]-[6]. This type of approach requires a
fast and efficient algorithm to switch in between the channel. This approach fails to an
inefficient because of the significant delay generated in switching the channels with the use of
commodity hardware NICs. The delay generated can be of the order of milliseconds. Sometimes
these are higher than the normal packet transmission time. Moreover the use of channel
switching requires changing in MAC layer and hardware.
Subramanian et al [9] designed a centralized channel assignment algorithm in which nodes
listens all available channels on its neighbourhood nodes for which listening node is in
interference range of other nodes and assigns channels which minimizes the interference from
the set of nodes within their interference range. The above approach considers the multi radios,
which does not work when number of interfaces is limited.

3
Ramachandaran introduced multi-radio conflict graph model and a centralized CA algorithm
[6]. They extended graph colouring problem to represent channel assignment problem as
colouring the nodes in multi-radio conflict graph. This CA algorithm traverses multi-radio graph
in bread first order and assigns channels in greedy manner and recommends utilization of a
dedicated radio assigned to common channel in order to ensure network connectivity.
Ko et al.[10] propose a distributed channel assignment algorithm where each node can choose
greedily a channel that minimizes its local objective function depending only on local
information. Every node selects a channel that minimizes the sum of interference cost within its
interference range. The advantage of this approach is that channel assignment can be achieved
based on local information among nodes. However they don’t consider number of interface
cards per node.
Naveed [3] proposed cluster based interference aware CA that exploits multiple paths between
mesh router and gateway. This method recommends the use of localized default channel in a
cluster to broadcasting with minimum overhead. Dedicating an interface on each mesh node in
the cluster poses heavy overhead.
Shin et al.[13] showed that finding a channel assignment for optimal performance is NP-hard.
They presented the channel assignment scheme, which uses randomized channel assignment in
a distributed manner while maintaining network connectivity. Channel assignment at NIC is
done randomly.
One solution proposed by [11, 6, 12] reserves one channel as default channel on default NIC
and other channels operating on non-default NIC for mesh connectivity within network. This
ensures network connectivity, at same time increases overhead and delay.
One approach proposed by hyacinth is to assign channels through routing protocol. The protocol
allocates channels in order to maximize channel diversity within flow. But it does not consider
interflow interference during channel assignment.
Other approach is to use multiple radio and multiple channels without the requirement of
channel switching [6-10]. The multiple WNICs allow simultaneous transmission and reception
on different channels. Previous literature shows the use of maximum number of NIC per mesh
router is limited to 3 as installing more than 3 NIC on commodity devices increases the
collision. Therefore in our analysis we have limited the maximum number of NIC to be used per
node to 2.But this approach needs the proper utilization of WNICs and channel assignment
scheme in such a way to reduce interference among neighbouring nodes and maximize the
throughput. This paper does analysis of algorithms and schemes used for channel assignment.
3. PROBLEM FORMULATION
3.1. Wireless mesh network Architecture
Wireless mesh network consist of fixed routers that provide a strong backbone to network to
aggregate traffic and retransmit traffic to mesh gateways which in turn provides access to
internet over a large coverage area. In, turn wireless mesh routing plays a role relaying nodes to
and fro from mesh gateways forming multi-hop wireless mesh network. The gateways are
interface to wired internetworking which contains infrastructure resources such as file servers
and application servers. The link between gateway and the wired network is point-to-point IEEE
802.11 standard or IEEE 802.16.
Each wireless mesh router consists of multiple radios which can be tuned to any of 3 IEEE
802.11b non-overlapping channels or 12 IEEE 802.11a/g non-overlapping channels. For two

4
nodes to have successfully communication, the two nodes should be in direct communication
range of each other. Moreover the NICs of two mesh points should be tuned to same frequency.
The two nodes in the interfering range of each other can interfere with each other if they are
tuned to same channel.
3.2. Transmission and Interference Model
Transmission and interference from nearby wireless mesh nodes can be described using two
models. These are protocol model and physical model.
3.2.1. Protocol Model
Let Rt and Ri denote the fixed transmission range and interference of all wireless interfaces
respectively where Rt
Ri > (approximately Ri = 2Rt Rt
Ri 2
= ). Let distance )
,
( v
u represent
the Euclidean distance between two nodes V
v
u ∈
, . For two nodes V
v
u ∈
, direct
communication is only possible if the distance Rt
v
u
d <
)
,
( and at least one of the interfaces of
the nodes operate in same channel. We assume that wireless links are symmetric that is if u can
transmit to v than v can also receive successful transmission from u. Two links )
1
,
1
(
1 v
u
e and
)
2
,
2
(
2 v
u
e interfere with each other if both edges operate on a common channel and any of the
distances )
2
,
1
( u
u
d , )
1
,
1
( v
u
d , )
2
,
1
( u
v
d , )
2
,
1
( v
v
d Ri
≤ .
3.2.2. Physical Model
The transmission is successful if SNRij (Signal to noise ratio) is greater than SNRthres
(threshold) where SNRij denotes the signal-to-noise ratio at node nj for transmission
received from node ni .
3.2.3. Channel Assignment problem formulation
The channel assignment problem is divided into two sub-problems. One is assigning interfaces
to the virtual link between communicating nodes known as neighbour-to-interface binding.
Second is assigning channels to interfaces known as interface-to-channel binding. The channel
should be assigned to virtual link so that its available bandwidth should be proportional to the
load it carries.
The goal of channel assignment is assigning channels to each node from set of non-overlapping
channels such that the sum of loads on interfering link is minimized. The objective is to assign
available interfaces on the nodes with the goal of minimizing the overall network interference
i.e. minimizing interfering links.
CA problem is NP-Hard even with the knowledge of network topology and network traffic. NP-
Hardness was proved by reducing multiple subset problems to CA problem [11]. It is also
shown that minimum edge colouring is subset problem of CA problem [7]. Solution to the CA
problem should address two important issues of wireless mesh networks: Connectivity and
Interference. Connectivity changes in the network topology can cause problems by affecting
network partitions, and affecting paths used by existing flows.
4. PROPOSED CA
We did some simulations on topology design for channel assignment to minimize interference
and maximize throughput by giving priority to reduce interference due to hidden terminal
problem rather than maximizing channel diversity. The simulations were performed for below 3
Topologies.

5
We found from simulation results that increasing channel diversity does not affect much to
aggregate throughput of network but minimizing interference considerably increases aggregate
throughput of network.
4.1. Proposed Channel Assignment Scheme
In this section we explain in details of our proposed algorithm and the pseudo code. We propose
a Distributed Channel Assignment scheme. Given a WMN topology graph proposed algorithm
works in three phases. The first phase involves two parts. In the first part calculation of
Euclidean distance between two wirelesses mesh points is calculated. In second part, formation
of clusters takes place. In second phase interface allocation and channel assignment takes place
in greedy fashion. In third phase Channel reassignment takes place considering interference
from nearby nodes operating on same channel.
We say that mesh routers are placed in 3-dimensional space with x, y, z coordinates. The
distance between two nodes will be calculated by Euclidean distance. If the distance Dij
between two mesh nodes is less than the transmission range Xij than two nodes can receive
and transmit data successfully without error and will result in formation of wireless link.
2
)
1
(
2
)
1
(
2
)
1
( z
z
y
y
x
x
Dij −
+
−
+
−
=
Clustering method used in proposed CA is based on the technique proposed by Gonzalez [16].
The algorithm makes uniform r-hop clusters where r is the maximum hop distance from cluster
head. In our implementation we selected r=2 because it represents interference domain size.
A B C D E
F
G
1
6
1
1
6
1
Figure 3. Interference-Aware multi-channel
multi-radio topology design
B C D E
F
G
A
1 6
1
1 6
6
Figure 2. Multi-Radio Multi-Channel
Topology
A B C D E
F
G
1 1 1 1
1
1
Figure 1. Single-Channel Single-Radio
Topology

6
Initially clusters are formed by selecting mesh gateways as cluster heads. Each mesh node
selects one of the cluster heads with minimum hop distance as its cluster head.
In the second phase interfaces are allocated to links. The binding is necessary to facilitate
communication over a link by assigning the same channel to both interfaces assigned to link.
The number of NICS required is equal to number of incident links on the mesh nodes. This is
required to preserve connectivity within the network.
The channels are allocated to logical links in an greedy fashion, each type of channel is equally
distributed all over the network. Distinct channels are assigned first to links incident on
gateways. This makes sure that the load is balanced on the different links operating on different
channels. The channels are assigned in way to provide maximum channel diversity.
In the third phase we find out the wireless links that operate in interference range of
each other and operate on same channel. Our algorithm reassigns the channels on links
in a way to minimize interference.
4.1. Pseudo Code
In this subsection we explain proposed algorithm pseudo code. First, we explain the notations
used in our pseudo codes. Let G<V, E> be the set of N nodes and E VxV
⊆ be the set of L
links. Let Vg V
⊆ is the set of gateway nodes. M(u) represent the number of radio interfaces
available on mesh router u V
∈ . Let K be the set of orthogonal channels available in the
network. X represents the set of Clusters in the network.
The abstract pseudo code is as follows.
Procedure ConstructLinks(G)
begin
1. for all V
vi∈ do
2. for all V
vj ∈
3. 2
)
(
2
)
(
2
)
( zj
zi
yj
yi
xj
xi
Dij −
+
−
+
−
=
4. if( Rt
Dij < )
5. Eij
E
E ∪
←
6. End if
A
B C
D
E
F
G
H
I J K
L
Figure 4. Mesh Grid Network and cluster
creation

7
7. End for
8. End for
9. End ConstructLinks()
In AllocateInterface() procedure we calculate number of incident links on the mesh nodes. The
mesh nodes are assigned number of NICs equal to number of incident links.
Procedure AllocateInterface(G,E)
begin
1. for all V
vi ∈ do
2. count = 0
3. for all E
ei ∈ do
4. if( )
( ei
V
vi ∈
∃ )
5. count++
6. End if
7. End for
8. )
(count
Cs
allocateNI
vi =
9. End for
10.End AllocateInterface()
In ConstructCluster() one cluster is created per gateway node and gateway node acts as cluster
headline. Mesh nodes joins appropriate cluster head depending on the minimum hop distance
from the cluster head.
Procedure ConstructCluster(G,Vg,HopCount,C)
Begin
1. for all Vg
v∈ do
2. createCluster(Xv)
3. Xv
X
X ∪
←
4. Vg
v
CHID ←
)
(
5. End for
6. for all }
{ Vg
V
v −
∈ do
7. )
(HopCount
opGateway
selectMinH
g ←
8. addClusterMember )
,
( v
Xg
9. CHID g
v ←
)
(
10. End for
11. for all X
x∈ do
12. if )
)
(
( r
x
t
ClusterDis >
13. )
(x
opNode
selectMaxH
v ←
14. )
(v
CHID
i ←
15. )
,
( v
Xi
terMember
removeClus
16. )
,
( Xv
X
ter
createClus
17. Xv
X
X ∪
←
18. v
v
CHID ←
)
(
19. for all }
{ Vg
V
u −
∈ do
20. )
(u
CHID
w ←
21. if )
,
(
)
,
( v
u
HopDist
w
u
HopDist 〉
22. )
,
( u
Xv
terMember
deleteClus

8
23. )
,
( u
Xv
Member
addCluster
24. v
u
CHID ←
)
(
25. end if
26. end for
27. end if
28. end for
29. End ConstructCluster()
In second phase of channel assignment links at 3 hop distances is observed. If the links within 3
hop distance interfere with each other than channels are swapped with non-interfering channels.
Thus in second phase we try to eliminate interfering links.
Procedure ChannelReAssignment(G,X,E)
Begin
1. E
Erassign =
2. φ
=
1
Etemp
3. φ
=
2
Etemp
A B C
D
E
F
G
H
I J K
L
1
2
2
3
3
1
1
2
2
3
1
3
1
3
3
1
3
Fig. 7 Channel Assignment at border nodes
A B C
D
E F
G
H
I J K
L
1
2
2
3
3
1
1
2
2
3
1
3
1
Fig 6. Interference-Aware Channel Re-
assignment within cluster
A
B C
D
E F
G
H
I J K L
1
2
3
1
3
2
1
2
3
1
1
3
2
Fig. 5. Channel assignment within
cluster

9
4. for all Ereassign
e∈ do
5. if ))
(
( ei
V
vi∈
∃
6. ei
Etemp
Etemp ∪
= 1
1
7. End if
8. for all 1
1 Etemp
e ∈
9. if ))
1
(
1
( i
e
V
i
v ∈
∃
10. i
e
Etemp
Etemp 1
2
2 ∪
=
11. End if
12. End for
13. If )
2
( φ
≠
Etemp
14. )
(ei
getChannel
ci =
15. )
1
(
1 i
e
getChannel
i
c =
16. )
2
(
2 i
e
getChannel
i
c =
17. if )
2
( i
c
ci =
18. )
2
(
2 i
e
nel
selectChan
i
c =
19. End if
20. End if
21. i
e
ei
Erassign
Erassign 2
−
−
=
22. End for
23. End Begin
4. SIMULATION RESULTS
Our proposed work was analyzed using NS-3 Simulator. Mesh network coverage on area 600m
* 600m was established using fixed distribution of mesh router. Each mesh router are equipped
first with four WNIC. The performance metrics will be obtained by averaging the results from
thirty simulation runs for every experiment.
The network model was constructed with a propagation loss model of 50 db for the direct link
between two nodes. The link is symmetric in nature. The distance between to communicating
nodes is set 200m abroad. The propagation loss model of 200 db was assigned as a default loss
model which implicitly means that there is no link between the two nodes or the two nodes are
outside the reception range of each other. The channels used were non-overlapping channels
(CH-34, CH-38 to CH-42) of IEEE 802.11a standard. The mobility of the mesh nodes is set to
constant position mobility model. An UDPSocket were opened at the transmit end that
generated packets of size 200 bytes at a data rate of 10kbps.This ensured the Constant Bit Rate
(CBR) streams saturating the channels. The standard protocol stack containing HWMP for
routing was used for all scenarios. The IEEE 802.11s link layer peer management link protocol
was used. The positions of the mesh nodes are fixed and nodes are having zero mobility. The
delay experienced by the packets to traverse from the transmitter to reception is kept constant.
The maximum queue length at each interface is set to 255 packets. Total number of packets in
queue will be used as a metric to estimate interference.
Simulation was run for 100 seconds. The .pcap files and trace files and flow monitor statistics
was studied for analysis. The use of flow monitor was to collect flow statistics of every flow.
Aggregate throughput of network was calculated as the summation of throughput for individual
flows. The packet loss is calculated as the number of packets lost after time period of 10sec or
dropped by receiving node due to interference, ttl timeout or invalid checksum.

10
TABLE I. INPUT PARAMETERS FOR SIMULATION
Parameters Values
Simulation Time 100 Seconds
Simulation Area 600m * 600m
Propogation Model Two-ray Ground Reflection
Transmission range 250 meter, 50db loss model
Traffic Type CBR (UDP)
Packet Size 128,256,1024,2048 bytes
Data Rates 10 kbps
Number of nodes 12
Number of radios 4
Number of connections 17
Link layer max queue length 255
Figure 8. Aggregate Throughput Vs
Packet Size (128,256,1024,2048)
Figure 9. Aggregate Delay Vs Packet
Size
Figure 9. Aggregate Packet loss Vs Packet
size
Figure 10. Aggregate Queue length
Vs packet size

11
From simulation results our proposed channel assignment scheme shows increase in throughput
as compared to BFSCA. Initially less packet size results in smaller contention time. As the
packet size increases from 128 bytes to 1024 bytes packets needs large transmission time which
increases the contention time for interference between the flows that makes the property of
collision between simultaneous transmissions becomes high due to many flows use the same
channel to communicate with each other. Results show that our proposed heuristic performs
better than BFSCA and Distributed Greedy Channel Assignment Schemes.
5. CONCLUSION
The Simulation were studied with respect to Aggregate throughput, Aggregate Delay Aggregate
packet loss and Aggregate Queue length experienced by the mesh network when BFSCA,
Greedy Channel Assignment and Our Proposed CA heuristic was operated. The BFSCA
reserves one channel and one radio as an default channel as common to preserve connectivity.
Though this BFSCA does preserve connectivity but one channel and one radio is always
reserved which does not efficiently utilizes available resources. The Greedy channel assignment
scheme selects the channels in greedy way. The less interfering channels are selected for
channel assignment for wireless links. Our proposed channel assignment scheme allocates the
channels that do not interfere with other channels in two hop distances. In doing so some of the
nodes may be operating on one channel and one radio and other nodes may be inactive. This
may lead to inefficient use of available resources in terms of channels and radio at nodes. This
inefficient use is resources in our proposed work is acceptable since use of all channels and
radios may increase interference and decrease throughput.
From the simulated results SNIR of our proposed work is high as compared to BFSCA
and Greedy CA scheme. The average queue length was calculated at each interfaces of each
node. From queue length results it is seen that the total interference experienced by each flow
through our proposed channel assignment scheme is less than BFSCA and Greedy CA scheme.
Aggregate throughput, Packet loss, Aggregate Delay experienced by simulating our proposed
channel assignment scheme is better than BFSCA and Greedy CA.
Figure 11. Flow Id Vs Throughput Figure 12. SNIR vs time

12
REFERENCES
[1] G. Eason, Raju, B. Athota, K. Negi, A. ” A Distributed Cluster based Interference-Traffic aware CA
for MRMC WMN” proc. WCSN 2009 IEEE, Allahabad,India.
[2] Sadiq Ali Makram,Mesut Gunes, “Distributed Channel Assignment for Multi-Radio Wireless Mesh
Networks” proc. ISCC 2008 IEEE , on Pages 272-277.
[3] Naveed, A. Kanhere, S.S. , “Cluster-based Channel Assignment in Multi-Radio Multi-Channel
Wireless Mesh Networks” proc. LCN 2009, Rawalpindi,Pakistan.
[4] J. So and N.H. Vaidya, “multi-channel mac for ad-hoc networks : Handling multi-channel hidden
terminals using a single transreceiver”, in proceedings of the ACM symposium on Mobile ad hoc
networking and computing (MOBIHOC) 2004, pp. 223-233.
[5] A. Nasipura, J. Zhang, and S.R Das, “A multichannel csma mac protocol for multihop wireless
networks” in proceedings of IEEE Wireless Communications and Networking Conference (WCNC),
1999.
[6] K. Ramachandran, E. Belding, K. Almeroth, and M. Buddhikot, “Interference-aware channel
assignment in multi-radio wireless mesh networks”, in INFOCOM, 2006.
[7] M.K. Marina and S.R Das., “A topology control approach for utilizing multiple channels in multi-
radio wireless mesh networks”, in proceedings of IEEE BroadNets, Boston, 2005. Pp. 381-390.
[8] A. Das, H. Alazemi, R. Vijayakumar, and S. Roy., “Optimization models for fixed channel
assignment in wireless mesh networks with multiple radios”, in proceedings of IEEE
Communications Society Conference on Sensor, Mesh and Ad-hoc Communication and Networks
(SECON 2007) 2007.
[9] A. P. Subramanian, H. Gupta, and S.R. Das,”Minimum interference channel assignment in multi-
radio wireless mesh network”, in Fourth Annual IEEE communications society conference on sensor,
mesh, and ad-hoc Communications and Networks (SECON 2007).
[10] B.-J.Ko, V.Mishra, J.Padhye, and D.Rubenstein, “Distributed channel assignment for multi-radio
802.11 mesh networks”, Colombia University, Tech. Rep., 2006.
[11] Raniwala K. Gopalan, and T.Cker Chiueh, “A Centralized channel Assignment and Routing
Algorithms for multi channel WMNs”, ACM SIGMOBILE Mobile Computing and Communiacations
Review,2004
[12] saskalli, S. Ghose, S. K. Das, L. Lenzini, and M. Conti, “Channel assignment strategies for multi-
radio wireless mesh networks: issues and solutions”, IEEE Communications Magazine, vol. 45, no.
11, pp. 86-93, 2007.
[13] Minho Shin; Seungjoon Lee; Yoo-ah Kim; “Distributed Channel Assignement for multi-radio
wireless networks” , Mobile adhoc and sensor systems (MASS) 2006 IEEE International conference,
pp.417-426 2006.
[14] Naveed, A. Kanhere, S.S. Jha, S.K. “Topology Control and Channel Assignment in Multi-Radio
Multi-Channel Wireless Mesh Networks”, Mobile Adhoc and Sensor Systems, 2007. MASS 2007.
[15] IEEE Internatonal Conference on 8-11 Oct. 2007, pages 1 – 9, pisa.
[16] Teofilo F. Gonzalez, Clustering to minimize the maximum intercluster distance Theoratical
Computer Science, 38: 293-306,1985.

INTERFERENCE-AWARE CHANNEL ASSIGNMENT FOR MAXIMIZING THROUGHPUT IN WMN

Recommended

More Related Content

Similar to INTERFERENCE-AWARE CHANNEL ASSIGNMENT FOR MAXIMIZING THROUGHPUT IN WMN (20)

More from pijans (20)

Recently uploaded (20)

INTERFERENCE-AWARE CHANNEL ASSIGNMENT FOR MAXIMIZING THROUGHPUT IN WMN