Data concurrency means that many users can access data at the same time

©Silberschatz, Korth and Sudarshan
16.1
Database System Concepts 3rd
Edition
Chapter 16: Concurrency Control
Chapter 16: Concurrency Control
 Lock-Based Protocols
 Timestamp-Based Protocols
 Validation-Based Protocols
 Multiple Granularity
 Multiversion Schemes
 Deadlock Handling
 Insert and Delete Operations
 Concurrency in Index Structures

16.2
Edition
Lock-Based Protocols
Lock-Based Protocols
 A lock is a mechanism to control concurrent access to a data item
 Data items can be locked in two modes :
1. exclusive (X) mode. Data item can be both read as well as
written. X-lock is requested using lock-X instruction.
2. shared (S) mode. Data item can only be read. S-lock is
requested using lock-S instruction.
 Lock requests are made to concurrency-control manager.
Transaction can proceed only after request is granted.

16.3
Edition
Lock-Based Protocols (Cont.)
 Lock-compatibility matrix
 A transaction may be granted a lock on an item if the requested
lock is compatible with locks already held on the item by other
transactions
 Any number of transactions can hold shared locks on an item,
but if any transaction holds an exclusive on the item no other
transaction may hold any lock on the item.
 If a lock cannot be granted, the requesting transaction is made to
wait till all incompatible locks held by other transactions have
been released. The lock is then granted.

16.4
Edition
 Example of a transaction performing locking:
T2: lock-S(A);
read (A);
unlock(A);
lock-S(B);
read (B);
unlock(B);
display(A+B)
 Locking as above is not sufficient to guarantee serializability — if A and B
get updated in-between the read of A and B, the displayed sum would be
wrong.
 A locking protocol is a set of rules followed by all transactions while
requesting and releasing locks. Locking protocols restrict the set of
possible schedules.

16.5
Edition
Pitfalls of Lock-Based Protocols
Pitfalls of Lock-Based Protocols
 Consider the partial schedule
 Neither T3 nor T4 can make progress — executing lock-S(B) causes T4
to wait for T3 to release its lock on B, while executing lock-X(A) causes
T3 to wait for T4 to release its lock on A.
 Such a situation is called a deadlock.
 To handle a deadlock one of T3 or T4 must be rolled back
and its locks released.

16.6
Edition
Pitfalls of Lock-Based Protocols (Cont.)
Pitfalls of Lock-Based Protocols (Cont.)
 The potential for deadlock exists in most locking protocols.
Deadlocks are a necessary evil.
 Starvation is also possible if concurrency control manager is
badly designed. For example:
 A transaction may be waiting for an X-lock on an item, while a
sequence of other transactions request and are granted an S-lock
on the same item.
 The same transaction is repeatedly rolled back due to deadlocks.
 Concurrency control manager can be designed to prevent
starvation.

16.7
Edition
The Two-Phase Locking Protocol
The Two-Phase Locking Protocol
 This is a protocol which ensures conflict-serializable schedules.
 Phase 1: Growing Phase
 transaction may obtain locks
 transaction may not release locks
 Phase 2: Shrinking Phase
 transaction may release locks
 transaction may not obtain locks
 The protocol assures serializability. It can be proved that the
transactions can be serialized in the order of their lock points
(i.e. the point where a transaction acquired its final lock).

16.8
Edition
The Two-Phase Locking Protocol (Cont.)
 Two-phase locking does not ensure freedom from deadlocks
 Cascading roll-back is possible under two-phase locking. To
avoid this, follow a modified protocol called strict two-phase
locking. Here a transaction must hold all its exclusive locks till it
commits/aborts.
 Rigorous two-phase locking is even stricter: here all locks are
held till commit/abort. In this protocol transactions can be
serialized in the order in which they commit.

16.9
Edition
 There can be conflict serializable schedules that cannot be
obtained if two-phase locking is used.
 However, in the absence of extra information (e.g., ordering of
access to data), two-phase locking is needed for conflict
serializability in the following sense:
Given a transaction Ti that does not follow two-phase locking, we
can find a transaction Tj that uses two-phase locking, and a
schedule for Ti and Tj that is not conflict serializable.

16.10
Edition
Lock Conversions
Lock Conversions
 Two-phase locking with lock conversions:
– First Phase:
 can acquire a lock-S on item
 can acquire a lock-X on item
 can convert a lock-S to a lock-X (upgrade)
– Second Phase:
 can release a lock-S
 can release a lock-X
 can convert a lock-X to a lock-S (downgrade)
 This protocol assures serializability. But still relies on the
programmer to insert the various locking instructions.

16.11
Edition
Automatic Acquisition of Locks
Automatic Acquisition of Locks
 A transaction Ti issues the standard read/write instruction, without
explicit locking calls.
 The operation read(D) is processed as:
if Ti has a lock on D
then
read(D)
else
begin
if necessary wait until no other
transaction has a lock-X on D
grant Ti a lock-S on D;
read(D)
end

16.12
Edition
Automatic Acquisition of Locks (Cont.)
Automatic Acquisition of Locks (Cont.)
 write(D) is processed as:
if Ti has a lock-X on D
then
write(D)
else
begin
if necessary wait until no other trans. has any lock on D,
if Ti has a lock-S on D
then
upgrade lock on D to lock-X
else
grant Ti a lock-X on D
write(D)
end;
 All locks are released after commit or abort

16.13
Edition
Implementation of Locking
Implementation of Locking
 A Lock manager can be implemented as a separate process to
which transactions send lock and unlock requests
 The lock manager replies to a lock request by sending a lock
grant messages (or a message asking the transaction to roll
back, in case of a deadlock)
 The requesting transaction waits until its request is answered
 The lock manager maintains a datastructure called a lock table
to record granted locks and pending requests
 The lock table is usually implemented as an in-memory hash
table indexed on the name of the data item being locked

16.14
Edition
Lock Table
Lock Table
 Black rectangles indicate granted
locks, white ones indicate waiting
requests
 Lock table also records the type of
lock granted or requested
 New request is added to the end of
the queue of requests for the data
item, and granted if it is compatible
with all earlier locks
 Unlock requests result in the request
being deleted, and later requests are
checked to see if they can now be
granted
 If transaction aborts, all waiting or
granted requests of the transaction
are deleted
 lock manager may keep a list of
locks held by each transaction, to
implement this efficiently

16.15
Edition
Graph-Based Protocols
Graph-Based Protocols
 Graph-based protocols are an alternative to two-phase locking
 Impose a partial ordering  on the set D = {d1, d2 ,..., dh} of all
data items.
 If di  dj then any transaction accessing both di and dj must access
di before accessing dj.
 Implies that the set D may now be viewed as a directed acyclic
graph, called a database graph.
 The tree-protocol is a simple kind of graph protocol.

16.16
Edition
Tree Protocol
Tree Protocol
 Only exclusive locks are allowed.
 The first lock by Ti may be on any data item. Subsequently, a
data Q can be locked by Ti only if the parent of Q is currently
locked by Ti.
 Data items may be unlocked at any time.

16.17
Edition
Graph-Based Protocols (Cont.)
Graph-Based Protocols (Cont.)
 The tree protocol ensures conflict serializability as well as
freedom from deadlock.
 Unlocking may occur earlier in the tree-locking protocol than in
the two-phase locking protocol.
 shorter waiting times, and increase in concurrency
 protocol is deadlock-free, no rollbacks are required
 the abort of a transaction can still lead to cascading rollbacks.
(this correction has to be made in the book also.)
 However, in the tree-locking protocol, a transaction may have to
lock data items that it does not access.
 increased locking overhead, and additional waiting time
 potential decrease in concurrency
 Schedules not possible under two-phase locking are possible
under tree protocol, and vice versa.

16.18
Edition
Timestamp-Based Protocols
Timestamp-Based Protocols
 Each transaction is issued a timestamp when it enters the system. If an
old transaction Ti has time-stamp TS(Ti), a new transaction Tj is assigned
time-stamp TS(Tj) such that TS(Ti) <TS(Tj).
 The protocol manages concurrent execution such that the time-stamps
determine the serializability order.
 In order to assure such behavior, the protocol maintains for each data Q
two timestamp values:
 W-timestamp(Q) is the largest time-stamp of any transaction that executed
write(Q) successfully.
 R-timestamp(Q) is the largest time-stamp of any transaction that executed
read(Q) successfully.

16.19
Edition
Timestamp-Based Protocols (Cont.)
 The timestamp ordering protocol ensures that any conflicting read
and write operations are executed in timestamp order.
 Suppose a transaction Ti issues a read(Q)
1. If TS(Ti)  W-timestamp(Q), then Ti needs to read a value of Q
that was already overwritten. Hence, the read operation is
rejected, and Ti is rolled back.
2. If TS(Ti) W-timestamp(Q), then the read operation is
executed, and R-timestamp(Q) is set to the maximum of R-
timestamp(Q) and TS(Ti).

16.20
Edition
 Suppose that transaction Ti issues write(Q).
 If TS(Ti) < R-timestamp(Q), then the value of Q that Ti is producing
was needed previously, and the system assumed that that value
would never be produced. Hence, the write operation is rejected,
and Ti is rolled back.
 If TS(Ti) < W-timestamp(Q), then Ti is attempting to write an
obsolete value of Q. Hence, this write operation is rejected, and Ti
is rolled back.
 Otherwise, the write operation is executed, and W-timestamp(Q)
is set to TS(Ti).

16.21
Edition
Example Use of the Protocol
Example Use of the Protocol
A partial schedule for several data items for transactions with
timestamps 1, 2, 3, 4, 5
T1 T2 T3 T4 T5
read(Y)
read(X)
read(Y)
write(Y)
write(Z)
read(Z)
read(X)
abort
read(X)
write(Z)
abort
write(Y)
write(Z)

16.22
Edition
Correctness of Timestamp-Ordering Protocol
Correctness of Timestamp-Ordering Protocol
 The timestamp-ordering protocol guarantees serializability since
all the arcs in the precedence graph are of the form:
Thus, there will be no cycles in the precedence graph
 Timestamp protocol ensures freedom from deadlock as no
transaction ever waits.
 But the schedule may not be cascade-free, and may not even be
recoverable.
transaction
with smaller
timestamp
transaction
with larger
timestamp

16.23
Edition
Recoverability and Cascade Freedom
Recoverability and Cascade Freedom
 Problem with timestamp-ordering protocol:
 Suppose Ti aborts, but Tj has read a data item written by Ti
 Then Tj must abort; if Tj had been allowed to commit earlier, the
schedule is not recoverable.
 Further, any transaction that has read a data item written by Tj must
abort
 This can lead to cascading rollback --- that is, a chain of rollbacks
 Solution:
 A transaction is structured such that its writes are all performed at
the end of its processing
 All writes of a transaction form an atomic action; no transaction may
execute while a transaction is being written
 A transaction that aborts is restarted with a new timestamp

16.24
Edition
Thomas’ Write Rule
Thomas’ Write Rule
 Modified version of the timestamp-ordering protocol in which
obsolete write operations may be ignored under certain
circumstances.
 When Ti attempts to write data item Q, if TS(Ti) < W-
timestamp(Q), then Ti is attempting to write an obsolete value of
{Q}. Hence, rather than rolling back Ti as the timestamp ordering
protocol would have done, this {write} operation can be ignored.
 Otherwise this protocol is the same as the timestamp ordering
protocol.
 Thomas' Write Rule allows greater potential concurrency. Unlike
previous protocols, it allows some view-serializable schedules
that are not conflict-serializable.

16.25
Edition
Validation-Based Protocol
Validation-Based Protocol
 Execution of transaction Ti is done in three phases.
1. Read and execution phase: Transaction Ti writes only to
temporary local variables
2. Validation phase: Transaction Ti performs a ``validation test''
to determine if local variables can be written without violating
serializability.
3. Write phase: If Ti is validated, the updates are applied to the
database; otherwise, Ti is rolled back.
 The three phases of concurrently executing transactions can be
interleaved, but each transaction must go through the three phases
in that order.
 Also called as optimistic concurrency control since transaction
executes fully in the hope that all will go well during validation

16.26
Edition
Validation-Based Protocol (Cont.)
Validation-Based Protocol (Cont.)
 Each transaction Ti has 3 timestamps
 Start(Ti) : the time when Ti started its execution
 Validation(Ti): the time when Ti entered its validation phase
 Finish(Ti) : the time when Ti finished its write phase
 Serializability order is determined by timestamp given at validation
time, to increase concurrency. Thus TS(Ti) is given the value of
Validation(Ti).
 This protocol is useful and gives greater degree of concurrency if
probability of conflicts is low. That is because the serializability order
is not pre-decided and relatively less transactions will have to be
rolled back.

16.27
Edition
Validation Test for Transaction
Validation Test for Transaction T
Tj
j
 If for all Ti with TS (Ti) < TS (Tj) either one of the following condition
holds:
 finish(Ti) < start(Tj)
 start(Tj) < finish(Ti) < validation(Tj) and the set of data items written
by Ti does not intersect with the set of data items read by Tj.
then validation succeeds and Tj can be committed. Otherwise,
validation fails and Tj is aborted.
 Justification: Either first condition is satisfied, and there is no
overlapped execution, or second condition is satisfied and
1. the writes of Tj do not affect reads of Ti since they occur after Ti
has finished its reads.
2. the writes of Ti do not affect reads of Tj since Tj does not read
any item written by Ti.

16.28
Edition
Schedule Produced by Validation
Schedule Produced by Validation
 Example of schedule produced using validation
T14 T15
read(B)
read(B)
B:- B-50
read(A)
A:- A+50
read(A)
(validate)
display (A+B)
(validate)
write (B)
write (A)

16.29
Edition
Multiple Granularity
Multiple Granularity
 Allow data items to be of various sizes and define a hierarchy of
data granularities, where the small granularities are nested
within larger ones
 Can be represented graphically as a tree (but don't confuse with
tree-locking protocol)
 When a transaction locks a node in the tree explicitly, it implicitly
locks all the node's descendents in the same mode.
 Granularity of locking (level in tree where locking is done):
 fine granularity (lower in tree): high concurrency, high locking
overhead
 coarse granularity (higher in tree): low locking overhead, low
concurrency

16.30
Edition
Example of Granularity Hierarchy
Example of Granularity Hierarchy
The highest level in the example hierarchy is the entire database.
The levels below are of type area, file and record in that order.

16.31
Edition
Intention Lock Modes
 In addition to S and X lock modes, there are three additional lock
modes with multiple granularity:
 intention-shared (IS): indicates explicit locking at a lower level of
the tree but only with shared locks.
 intention-exclusive (IX): indicates explicit locking at a lower level
with exclusive or shared locks
 shared and intention-exclusive (SIX): the subtree rooted by that
node is locked explicitly in shared mode and explicit locking is being
done at a lower level with exclusive-mode locks.
 intention locks allow a higher level node to be locked in S or X
mode without having to check all descendent nodes.

16.32
Edition
Compatibility Matrix with
Compatibility Matrix with
 The compatibility matrix for all lock modes is:
IS IX S S IX X
IS
IX
S
S IX
X





  




   

 
 





16.33
Edition
Multiple Granularity Locking Scheme
Multiple Granularity Locking Scheme
 Transaction Ti can lock a node Q, using the following rules:
1. The lock compatibility matrix must be observed.
2. The root of the tree must be locked first, and may be locked in
any mode.
3. A node Q can be locked by Ti in S or IS mode only if the parent
of Q is currently locked by Ti in either IX or IS
mode.
4. A node Q can be locked by Ti in X, SIX, or IX mode only if the
parent of Q is currently locked by Ti in either IX
or SIX mode.
5. Ti can lock a node only if it has not previously unlocked any node
(that is, Ti is two-phase).
6. Ti can unlock a node Q only if none of the children of Q are
currently locked by Ti.
 Observe that locks are acquired in root-to-leaf order,
whereas they are released in leaf-to-root order.

16.34
Edition
Multiversion Schemes
Multiversion Schemes
 Multiversion schemes keep old versions of data item to increase
concurrency.
 Multiversion Timestamp Ordering
 Multiversion Two-Phase Locking
 Each successful write results in the creation of a new version of
the data item written.
 Use timestamps to label versions.
 When a read(Q) operation is issued, select an appropriate
version of Q based on the timestamp of the transaction, and
return the value of the selected version.
 reads never have to wait as an appropriate version is returned
immediately.

16.35
Edition
Multiversion Timestamp Ordering
Multiversion Timestamp Ordering
 Each data item Q has a sequence of versions <Q1, Q2,...., Qm>.
Each version Qk contains three data fields:
 Content -- the value of version Qk.
 W-timestamp(Qk) -- timestamp of the transaction that created
(wrote) version Qk
 R-timestamp(Qk) -- largest timestamp of a transaction that
successfully read version Qk
 when a transaction Ti creates a new version Qk of Q, Qk's W-
timestamp and R-timestamp are initialized to TS(Ti).
 R-timestamp of Qk is updated whenever a transaction Tj reads
Qk, and TS(Tj) > R-timestamp(Qk).

16.36
Edition
Multiversion Timestamp Ordering (Cont)
Multiversion Timestamp Ordering (Cont)
 The multiversion timestamp scheme presented next ensures serializability.
 Suppose that transaction Ti issues a read(Q) or write(Q) operation. Let
Qk denote the version of Q whose write timestamp is the largest write
timestamp less than or equal to TS(Ti).
1. If transaction Ti issues a read(Q), then the value returned is the
content of version Qk.
2. If transaction Ti issues a write(Q), and if TS(Ti) < R-
timestamp(Qk), then transaction Ti is rolled
back. Otherwise, if TS(Ti) = W-timestamp(Qk), the contents of Qk
are overwritten, otherwise a new version of Q is created.
 Reads always succeed; a write by Ti is rejected if some other transaction
Tj that (in the serialization order defined by the timestamp values) should
read Ti's write, has already read a version created by a transaction older
than Ti.

16.37
Edition
Multiversion Two-Phase Locking
Multiversion Two-Phase Locking
 Differentiates between read-only transactions and update
transactions
 Update transactions acquire read and write locks, and hold all
locks up to the end of the transaction. That is, update
transactions follow rigorous two-phase locking.
 Each successful write results in the creation of a new version of the
data item written.
 each version of a data item has a single timestamp whose value is
obtained from a counter ts-counter that is incremented during
commit processing.
 Read-only transactions are assigned a timestamp by reading the
current value of ts-counter before they start execution; they
follow the multiversion timestamp-ordering protocol for
performing reads.

16.38
Edition
Multiversion Two-Phase Locking (Cont.)
Multiversion Two-Phase Locking (Cont.)
 When an update transaction wants to read a data item, it obtains
a shared lock on it, and reads the latest version.
 When it wants to write an item, it obtains X lock on; it then
creates a new version of the item and sets this version's
timestamp to .
 When update transaction Ti completes, commit processing
occurs:
 Ti sets timestamp on the versions it has created to ts-counter + 1
 Ti increments ts-counter by 1
 Read-only transactions that start after Ti increments ts-counter
will see the values updated by Ti.
 Read-only transactions that start before Ti increments the
ts-counter will see the value before the updates by Ti.
 Only serializable schedules are produced.

16.39
Edition
Deadlock Handling
Deadlock Handling
 Consider the following two transactions:
T1: write (X) T2: write(Y)
write(Y) write(X)
 Schedule with deadlock
T1 T2
lock-X on X
write (X)
lock-X on Y
write (X)
wait for lock-X on X
wait for lock-X on Y

16.40
Edition
Deadlock Handling
Deadlock Handling
 System is deadlocked if there is a set of transactions such that
every transaction in the set is waiting for another transaction in
the set.
 Deadlock prevention protocols ensure that the system will
never enter into a deadlock state. Some prevention strategies :
 Require that each transaction locks all its data items before it begins
execution (predeclaration).
 Impose partial ordering of all data items and require that a
transaction can lock data items only in the order specified by the
partial order (graph-based protocol).

16.41
Edition
More Deadlock Prevention Strategies
More Deadlock Prevention Strategies
 Following schemes use transaction timestamps for the sake of
deadlock prevention alone.
 wait-die scheme — non-preemptive
 older transaction may wait for younger one to release data item.
Younger transactions never wait for older ones; they are rolled back
instead.
 a transaction may die several times before acquiring needed data
item
 wound-wait scheme — preemptive
 older transaction wounds (forces rollback) of younger transaction
instead of waiting for it. Younger transactions may wait for older
ones.
 may be fewer rollbacks than wait-die scheme.

16.42
Edition
Deadlock prevention (Cont.)
Deadlock prevention (Cont.)
 Both in wait-die and in wound-wait schemes, a rolled back
transactions is restarted with its original timestamp. Older
transactions thus have precedence over newer ones, and
starvation is hence avoided.
 Timeout-Based Schemes :
 a transaction waits for a lock only for a specified amount of time.
After that, the wait times out and the transaction is rolled back.
 thus deadlocks are not possible
 simple to implement; but starvation is possible. Also difficult to
determine good value of the timeout interval.

16.43
Edition
Deadlock Detection
Deadlock Detection
 Deadlocks can be described as a wait-for graph, which consists
of a pair G = (V,E),
 V is a set of vertices (all the transactions in the system)
 E is a set of edges; each element is an ordered pair Ti Tj.
 If Ti  Tj is in E, then there is a directed edge from Ti to Tj,
implying that Ti is waiting for Tj to release a data item.
 When Ti requests a data item currently being held by Tj, then the
edge Ti Tj is inserted in the wait-for graph. This edge is removed
only when Tj is no longer holding a data item needed by Ti.
 The system is in a deadlock state if and only if the wait-for graph
has a cycle. Must invoke a deadlock-detection algorithm
periodically to look for cycles.

16.44
Edition
Deadlock Detection (Cont.)
Deadlock Detection (Cont.)
Wait-for graph without a cycle Wait-for graph with a cycle

16.45
Edition
Deadlock Recovery
Deadlock Recovery
 When deadlock is detected :
 Some transaction will have to rolled back (made a victim) to break
deadlock. Select that transaction as victim that will incur minimum
cost.
 Rollback -- determine how far to roll back transaction
 Total rollback: Abort the transaction and then restart it.
 More effective to roll back transaction only as far as necessary to
break deadlock.
 Starvation happens if same transaction is always chosen as victim.
Include the number of rollbacks in the cost factor to avoid starvation

16.46
Edition
Insert and Delete Operations
Insert and Delete Operations
 If two-phase locking is used :
 A delete operation may be performed only if the transaction
deleting the tuple has an exclusive lock on the tuple to be deleted.
 A transaction that inserts a new tuple into the database is given an
X-mode lock on the tuple
 Insertions and deletions can lead to the phantom phenomenon.
 A transaction that scans a relation (e.g., find all accounts in
Perryridge) and a transaction that inserts a tuple in the relation (e.g.,
insert a new account at Perryridge) may conflict in spite of not
accessing any tuple in common.
 If only tuple locks are used, non-serializable schedules can result:
the scan transaction may not see the new account, yet may be
serialized before the insert transaction.

16.47
Edition
Insert and Delete Operations (Cont.)
Insert and Delete Operations (Cont.)
 The transaction scanning the relation is reading information that
indicates what tuples the relation contains, while a transaction
inserting a tuple updates the same information.
 The information should be locked.
 One solution:
 Associate a data item with the relation, to represent the information
about what tuples the relation contains.
 Transactions scanning the relation acquire a shared lock in the data
item,
 Transactions inserting or deleting a tuple acquire an exclusive lock on
the data item. (Note: locks on the data item do not conflict with locks on
individual tuples.)
 Above protocol provides very low concurrency for
insertions/deletions.
 Index locking protocols provide higher concurrency while
preventing the phantom phenomenon, by requiring locks
on certain index buckets.

16.48
Edition
Index Locking Protocol
Index Locking Protocol
 Every relation must have at least one index. Access to a relation
must be made only through one of the indices on the relation.
 A transaction Ti that performs a lookup must lock all the index
buckets that it accesses, in S-mode.
 A transaction Ti may not insert a tuple ti into a relation r without
updating all indices to r.
 Ti must perform a lookup on every index to find all index buckets
that could have possibly contained a pointer to tuple ti, had it
existed already, and obtain locks in X-mode on all these index
buckets. Ti must also obtain locks in X-mode on all index buckets
that it modifies.
 The rules of the two-phase locking protocol must be observed.

16.49
Edition
Weak Levels of Consistency
Weak Levels of Consistency
 Degree-two consistency: differs from two-phase locking in that
S-locks may be released at any time, and locks may be acquired
at any time
 X-locks must be held till end of transaction
 Serializability is not guaranteed, programmer must ensure that no
erroneous database state will occur]
 Cursor stability:
 For reads, each tuple is locked, read, and lock is immediately
released
 X-locks are held till end of transaction
 Special case of degree-two consistency

16.50
Edition
Weak Levels of Consistency in SQL
Weak Levels of Consistency in SQL
 SQL allows non-serializable executions
 Serializable: is the default
 Repeatable read: allows only committed records to be read, and
repeating a read should return the same value (so read locks should
be retained)
 However, the phantom phenomenon need not be prevented
– T1 may see some records inserted by T2, but may not see
others inserted by T2
 Read committed: same as degree two consistency, but most
systems implement it as cursor-stability
 Read uncommitted: allows even uncommitted data to be read

16.51
Edition
Concurrency in Index Structures
Concurrency in Index Structures
 Indices are unlike other database items in that their only job is to
help in accessing data.
 Index-structures are typically accessed very often, much more
than other database items.
 Treating index-structures like other database items leads to low
concurrency. Two-phase locking on an index may result in
transactions executing practically one-at-a-time.
 It is acceptable to have nonserializable concurrent access to an
index as long as the accuracy of the index is maintained.
 In particular, the exact values read in an internal node of a
B+
-tree are irrelevant so long as we land up in the correct leaf
node.
 There are index concurrency protocols where locks on internal
nodes are released early, and not in a two-phase fashion.

16.52
Edition
Concurrency in Index Structures (Cont.)
Concurrency in Index Structures (Cont.)
 Example of index concurrency protocol:
 Use crabbing instead of two-phase locking on the nodes of the
B+
-tree, as follows. During search/insertion/deletion:
 First lock the root node in shared mode.
 After locking all required children of a node in shared mode, release
the lock on the node.
 During insertion/deletion, upgrade leaf node locks to exclusive
mode.
 When splitting or coalescing requires changes to a parent, lock the
parent in exclusive mode.
 Above protocol can cause excessive deadlocks. Better protocols
are available; see Section 16.9 for one such protocol, the B-link
tree protocol

16.54
Edition
Partial Schedule Under Two-Phase
Partial Schedule Under Two-Phase
Locking
Locking

16.55
Edition
Incomplete Schedule With a Lock Conversion
Incomplete Schedule With a Lock Conversion

16.56
Edition
Lock Table
Lock Table

16.57
Edition
Tree-Structured Database Graph
Tree-Structured Database Graph

16.58
Edition
Serializable Schedule Under the Tree Protocol
Serializable Schedule Under the Tree Protocol

16.59
Edition
Schedule 3
Schedule 3

16.60
Edition
Schedule 4
Schedule 4

16.61
Edition
Schedule 5, A Schedule Produced by Using Validation
Schedule 5, A Schedule Produced by Using Validation

16.62
Edition
Granularity Hierarchy
Granularity Hierarchy

16.63
Edition
Compatibility Matrix
Compatibility Matrix

16.64
Edition
Wait-for Graph With No Cycle
Wait-for Graph With No Cycle

16.65
Edition
Wait-for-graph With A Cycle
Wait-for-graph With A Cycle

16.66
Edition
Nonserializable Schedule with Degree-Two
Nonserializable Schedule with Degree-Two
Consistency
Consistency

16.67
Edition
B
B+
+
-Tree For
-Tree For account
account File with
File with n
n = 3.
= 3.

16.68
Edition
Insertion of “Clearview” Into the B
Insertion of “Clearview” Into the B+
+
-Tree of Figure
-Tree of Figure
16.21
16.21

16.69
Edition
Lock-Compatibility Matrix
Lock-Compatibility Matrix

Data concurrency means that many users can access data at the same time

Recommended

More Related Content

Similar to Data concurrency means that many users can access data at the same time (20)

Recently uploaded (20)

Data concurrency means that many users can access data at the same time