Cprogrammingprogramcontrols

2/77
 Program begins execution at the main() function.
 Statements within the main() function are then
executed from top-down style, line-by-line.
 However, this order is rarely encountered in real C
program.
 The order of the execution within the main() body
may be branched.
 Changing the order in which statements are
executed is called program control.
 Accomplished by using program control statements.
 So we can control the program flows.
www.tenouk.com, ©

3/77
 There are three types of program controls:
1. Sequence control structure.
2. Selection structures such as if, if-else,
nested if, if-if-else, if-else-if
and switch-case-break.
3. Repetition (loop) such as for, while and
do-while.
1. Certain C functions and keywords also can
be used to control the program flows.
www.tenouk.com, ©

4/77
 Take a look at the following example
www.tenouk.com, ©
Jump/branch to printf() Back to main() from printf()

5/77
float paidRate = 5.0, sumPaid, paidHours = 25; S1
sumPaid = paidHours * paidRate; S2
printf("Paid sum = $%.2f n", sumPaid); S3
return 0; S4
 One entry point and one exit point.
 Conceptually, a control structure like this means a
sequence execution.
www.tenouk.com, ©

6/77
 Program need to select from the options given
for execution.
 At least 2 options, can be more than 2.
 Option selected based on the condition
evaluation result: TRUE or FALSE.
Selection Control Structure
www.tenouk.com, ©

7/77
Selection: if, if-else, if-else-if
 Starting from the most basic if syntax,
if (condition) if (condition)
statement; { statements;}
next_statement; next_statement;
1.(condition) is evaluated.
2. If TRUE (non-zero) the statement is executed.
3. If FALSE (zero) the next_statement following the if statement
block is executed.
4. So, during the execution, based on some condition, some codes were
skipped.
www.tenouk.com, ©

8/77
For example:
if (hours > 70)
hours = hours + 100;
printf("Less hours, no bonus!n");
 If hours is less than or equal to 70, its value will remain unchanged and the printf() will
be executed.
 If it exceeds 70, its value will be increased by 100.
if(jobCode == '1')
{
carAllowance = 100.00;
housingAllowance = 500.00;
entertainmentAllowance = 300.00;
}
printf("Not qualified for car, housing and entertainment allowances!");
The three statements enclosed in the curly braces { } will only be executed if jobCode is equal
to '1', else the printf() will be executed.
www.tenouk.com, ©

9/77
if (condition) if (condition)
statement_1; { a block of statements;}
else else
statement_2; { a block of statements;}
next_statement; next_statement;
Explanation:
1.The (condition) is evaluated.
2.If it evaluates to non-zero (TRUE), statement_1 is executed,
otherwise, if it evaluates to zero (FALSE), statement_2 is executed.
3.They are mutually exclusive, meaning, either statement_1 is
executed or statement_2, but not both.
4.statements_1 and statements_2 can be a block of codes and
must be put in curly braces.
www.tenouk.com, ©

10/77
For example:
if(myCode == '1')
rate = 7.20;
else
rate = 12.50;
If myCode is equal to '1', the rate is 7.20 else, if
myCode is not equal to '1' the rate is 12.50.
www.tenouk.com, ©
Equal/not equal (=) is not a value comparison, but a character comparison!!!

11/77
 Program example 1: if
 Program example 2: if-if
 Program example 3: if-else
www.tenouk.com, ©

12/77
 The if-else constructs can be nested (placed one within another) to any depth.
 General forms: if-if-else and if-else-if.
 The if-if-else constructs has the following form (3 level of depth example),
if(condition_1)
if(condition_2)
if(condition_3)
statement_4;
else
statement_3;
else
statement_2;
else
statement_1;
next_statement;
www.tenouk.com, ©

13/77
 In this nested form, condition_1 is evaluated. If it is zero (FALSE),
statement_1 is executed and the entire nested if statement is
terminated.
 If non-zero (TRUE), control goes to the second if (within the first if)
and condition_2 is evaluated.
 If it is zero (FALSE), statement_2 is executed; if not, control goes
to the third if (within the second if) and condition_3 is evaluated.
 If it is zero (FALSE), statement_3 is executed; if not,
statement_4 is executed. The statement_4 (inner most) will only
be executed if all the if statement are TRUE.
 Again, only one of the statements is executed other will be skipped.
 If the else is used together with if, always match an else with the
nearest if before the else.
 statements_x can be a block of codes and must be put in curly
braces.
Program example: nested if-else
www.tenouk.com, ©

14/77
 The if-else-if statement has the following form (3 levels example).
if(condition_1)
statement_1;
else if (condition_2)
statement_2;
else if(condition_3)
statement_3;
else
statement_4;
next_statement;
www.tenouk.com, ©

15/77
 condition_1 is first evaluated. If it is non zero (TRUE),
statement_1 is executed and the whole statement
terminated and the execution is continue on the
next_statement.
 If condition_1 is zero (FALSE), control passes to the
next else-if and condition_2 is evaluated.
 If it is non zero (TRUE), statement_2 is executed and
the whole system is terminated. If it is zero (FALSE), the
next else-if is tested.
 If condition_3 is non zero (TRUE), statement_3 is
executed; if not, statement_4 is executed.
 Note that only one of the statements will be executed,
others will be skipped.
 statement_x can be a block of statement and must be
put in curly braces.
www.tenouk.com, ©

16/77
The if-else-if program example
 If mark is less than 40 then grade 'F' will
be displayed; if it is greater than or equal
to 40 but less than 50, then grade 'E' is
displayed.
 The test continues for grades 'D', 'C', and
'B'.
 Finally, if mark is greater than or equal to
80, then grade 'A' is displayed.
www.tenouk.com, ©

17/77
Selection: The switch-case-break
 The most flexible selection program control.
 Enables the program to execute different statements
based on an condition or expression that can have more
than two values.
 Also called multiple choice statements.
 The if statement were limited to evaluating an expression
that could have only two logical values: TRUE or FALSE.
 If more than two values, have to use nested if.
 The switch statement makes such nesting unnecessary.
 Used together with case and break.
www.tenouk.com, ©

18/77
 The switch constructs has the following form:
switch(condition)
{
case template_1 : statement(s);
break;
break;
break;
…
…
case template_n : statement(s);
break;
default : statement(s);
}
next_statement;
www.tenouk.com, ©

19/77
 Evaluates the (condition) and compares its value with the
templates following each case label.
 If a match is found between (condition) and one of the
templates, execution is transferred to the statement(s) that
follows the case label.
 If no match is found, execution is transferred to the
statement(s) following the optional default label.
 If no match is found and there is no default label, execution
passes to the first statement following the switch statement
closing brace which is the next_statement.
 To ensure that only the statements associated with the
matching template are executed, include a break keyword
where needed, which terminates the entire switch statement.
 The statement(s) can be a block of code in curly braces.
The C switch-case-break program example
www.tenouk.com, ©

20/77
 The statement sequence for case may also be NULL or empty.
 NULL/empty switch-case-break statement example
 The program would display,
B stands for Blue colour! If the value entered at the prompt
is B;
You have chosen 'G', 'R' or
'Y'
G stands for Green, R for
Red and Y for Yellow!
If the value entered at the prompt
is G or R or Y;
The initial not a chosen
colour! If there is no matching characters.
 It is useful for multiple cases that need the same processing
sequence.
www.tenouk.com, ©

21/77
 The break statement may be omitted to allow the execution to
continue to the next cases.
The switch-case-break without break program example
 It will display the message "Choice number 1!" if nChoice == 1.
 It will display the message "Choice number 2!" if nChoice == 2.
 It will display both the messages "Choice number 3!" and "Choice
number 4!" if nChoice == 3.
 It will display the "Invalid choice!" if it has any other value.
 The switch-case construct can also be nested.
www.tenouk.com, ©

22/77
 The differences between nested if and switch:
• The switch-case permits the execution of more than one
alternatives (by not placing break) whereas the if statement
does not. In other words, alternatives in an if statement are
mutually exclusive whereas they may or may not be in the case of
a switch-case.
• A switch can only perform equality tests involving integer (or
character) constants, whereas the if statement allows more
general comparison involving other data types as well.
1. When there are more than 3 or 4 conditions, use the
switch-case-break statement rather than a long nested
if statement.
2. When there are multiple options to choose from.
3. When test condition only use integer (or character)
constants.
www.tenouk.com, ©

23/77
A flow-chart story
 A graphical representation of an algorithm.
 Drawn using certain symbols such as
rectangles, diamonds, ovals, and small
circles.
 These symbols are connected by arrows
called flow lines.
 Flow-charts clearly show the program's
execution order and indirectly describe how
control structures operate.
www.tenouk.com, ©

24/77
Symbol Name Description
Rectangular or action
A process or an action such as
calculation and assignment
Oval
Begin/start or End/stop. Indicates a
completed algorithm or program flow
Diamond or decision
Indicates a decision to be made such
as YES/NO, TRUE/FALSE, <, <= etc.
Flow lines
Indicates the order of the actions to be
executed, connecting other symbols
Small circle or connector
Indicates a portion of a complete
algorithm continued from the previous
portion or to be continued to the next
portion
Input or output
The input or output such as standard
input or output
www.tenouk.com, ©

25/77
 The following flow chart examples represent C if selection
constructs.
The if program source code exam
FALSE
TRUE
Start
printf("");
scanf("”);
intNum ==
3? printf("");
printf("");
printf("");
Stop
www.tenouk.com, ©

26/77
 The following flow
chart examples
represent C switch-
case selection
constructs.
The switch-case-break progr
F
T
T
break;
Start
printf("");
printf("");
scanf("");
B?
G?
R?
Y?
break;printf("");
printf("");
printf("");
printf("");
Stop
T
F
T
www.tenouk.com, ©

27/77
 if, if-else and switch-case-break flow charts
www.tenouk.com, ©

28/77
Repetition: The for statement
 Executes a code block for a certain number of times.
 The code block may have no statement, one statement or more.
 The for statement causes the for loop to be executed in a fixed number of times.
 The following is the for statement form,
for(initial_value;condition(s);increment/decrement)
statement(s);
next_statement;
 initial_value, condition(s) and increment/decrement are any valid C
expressions.
 The statement(s) may be a single or compound C statement (a block of code).
 When for statement is encountered during program execution, the following events
occurs:
1. The initial_value is evaluated e.g. intNum = 1.
2. Then the condition(s) is evaluated, typically a relational expression.
3. If condition(s) evaluates to FALSE (zero), the for statement terminates and
execution passes to next_statement.
4. If condition(s) evaluates as TRUE (non zero), the statement(s) is executed.
• Next, increment/decrement is executed, and execution returns to step no. 2
until condition(s) becomes FALSE.
www.tenouk.com, ©

29/77
 The for loop flow chart should be something like the
following.
F
Stop
Execute statement(s)
Do increment/ decrement
T
Start
Evaluate initial_value
Evaluate
condition(s)
www.tenouk.com, ©

30/77
 A Simple for example, printing integer 1 to 10.
#include <stdio.h>
void main(void)
{
int nCount;
// display the numbers 1 to 10
for(nCount = 1; nCount <= 10; nCount++)
printf("%d ", nCount);
printf("n");
}
www.tenouk.com, ©

31/77
F
Stop
printf("…");
nCount++
T
Start
nCount = 1
nCount <=10?
 Its flow chart…
www.tenouk.com, ©

32/77
 for loop is a very flexible construct.
 Can use the decrementing counter instead of
incrementing. For example,
for (nCount = 100; nCount > 0; nCount--)
 Can use counter other than 1, for example 3,
for(nCount = 0; nCount < 1000; nCount += 3)
 initial_value can be omitted if the test variable
has been initialized beforehand.
 However the semicolon must still be there. For
example,
nCount=1;
for( ; nCount < 1000; nCount ++)
www.tenouk.com, ©

33/77
 The initial_value can be any valid C expression, the
expression is executed once when the for statement is
first reached. For example,
nCount =1;
for(printf("Now sorting the array…"); nCount < 1000;
nCount ++)
 The increment/decrement expression can be omitted as
long as the counter variable is updated within the body of
the for statement.
 The semicolon still must be included. For example,
for(nCount =0; nCount < 100; )
printf("%d", nCount ++);
www.tenouk.com, ©

34/77
 The condition(s) expression that terminates the
loop can be any valid C expression.
 As long as it evaluates as TRUE (non zero), the for
statement continues to execute.
 Logical operators can be used to construct more
complex condition(s) expressions. For
example,
for(nCount =0; nCount < 1000 && name[nCount] != 0; nCount ++)
printf("%d", name[nCount]);
for(nCount = 0; nCount < 1000 && list[nCount];)
printf("%d", list[nCount ++]);
 Note: The for statement(s) and arrays are closely related, so it is difficult to
define one without explaining the other (will be discussed in another
Chapter).
www.tenouk.com, ©

35/77
 The for statement(s) can be followed by a null (empty)
statement, so that task is done in the for loop itself.
 Null statement consists of a semicolon alone on a line. For
example,
for(count = 0; count < 20000; count++)
;
 This statement provides a pause (delay) of 20,000
milliseconds.
www.tenouk.com, ©

36/77
 An expression can be created by separating two sub expressions
with the comma operator, and are evaluated (in left-to-right order),
and the entire expression evaluates to the value of the right sub
expression.
 Each part of the for statement can be made to perform multiple
duties. For example,
"We have two arrays with 1000 elements each, named a[ ] and b[ ].
Then we want to copy the contents of a[ ] to b[ ] in the reverse order,
so, after the copy operation, the array content should be…"
b[0], b[1], b[2],… and a[999], a[998], a[997],… and
so on.
 sample coding is,
for(iRow = 0, jColumn = 999; iRow < 1000; iRow ++, jColumn--)
b[jColumn] = a[iRow];
www.tenouk.com, ©

37/77
 Another examples of the for statements,
nSum = 0;
for(iRow = 1; iRow <=20; iRow++)
nSum = nSum + iRow;
printf("n Sum of the first 20 natural numbers = ");
printf("Sum = %d", nSum);
 The above program segment will compute and display the sum of
the first 20 natural numbers.
 The above example can be re-written as,
for(iNum = 1, nSum = 0; iNum <= 20; iNum++)
nSum = nSum + iNum;
printf("Sum of the first 20 natural numbers = %d", nSum);
 Take note that the initialization part has two statements separated
by a comma (,).
www.tenouk.com, ©

38/77
 Another example,
for(iNum = 2, nSum=0, nSum2 = 0; iNum <= 20; iNum = iNum + 2)
{
nSum = nSum + iNum;
nSum2 = nSum2 + iNum * iNum;
}
printf("Sum of the first 20 even natural numbers = %dn", nSum);
printf("Sum of the square for the first 20 even natural numbers =
%d", nSum2);
 In this example, the for statement is a compound or
block statement.
 Note that, the initial value in the initialization part doesn’t
have to be zero and the increment value unnecessarily
needs to be 1.
www.tenouk.com, ©

39/77
 We can also create an infinite or never-ending loop by omitting all
the expressions or by using a non-zero constant for condition(s) as
shown in the following two code snippets,
for( ; ; )
printf("This is an infinite loopn");
 or
for( ; 1 ; )
printf("This is an infinite loopn");
 In both cases, the message "This is an infinite loop" will
be printed repeatedly, indefinitely.
 All the repetition constructs discussed so far can be nested to any
degree.
www.tenouk.com, ©

40/77
The nested for example
 The program has two for loops. The loop index iRow for the outer (first)
loop runs from 1 to 10 and for each value of iRow, the loop index jColumn
for the inner loop runs from iRow + 1 to 10.
 Note that for the last value of iRow (i.e. 10), the inner loop is not executed at
all because the starting value of jColumn is 2 and the expression jColumn
< 11 yields the value false (jColumn = 11).
www.tenouk.com, ©

41/77
Another nested for example
1. In the first for loop, the initialization is skipped because the initial value of
row, 10 has been initialized; this for loop is executed until the row is 1
(row > 0).
2. For every row value, the inner for loop will be executed until col = 1 (col
> 0).
3. So the external for loop will print the row and the internal for loop will print
the column so we got a rectangle of #.
www.tenouk.com, ©

42/77
Repetition: The while loop
 Executes a block of statements as long as a specified condition is TRUE.
 The general while loop construct,
while (condition)
statement(s);
next_statement;
 The (condition) may be any valid C expression.
 The statement(s) may be either a single or a compound (a block of code) C
statement.
 When while statement encountered, the following events occur:
1. The (condition) is evaluated.
2. If (condition) evaluates to FALSE (zero), the while loop terminates
and execution passes to the next_statement.
3. If (condition) evaluates as TRUE (non zero), the C statement(s) is
executed.
4. Then, the execution returns to step number 1 until condition becomes
FALSE.
www.tenouk.com, ©

43/77
 The while statement flow chart is shown below.
Start
Evaluate
condition
Stop
F
T
www.tenouk.com, ©

44/77
// simple while loop example
#include <stdio.h>
int main(void)
{
int nCalculate = 1;
// set the while condition
while(nCalculate <= 12)
{
// print
printf("%d ", nCalculate);
// increment by 1, repeats
nCalculate++;
}
// a newline
printf("n");
return 0;
}
 A simple example
www.tenouk.com, ©

45/77
 The same task that can be performed using the for
statement.
 But, while statement does not contain an initialization
section, the program must explicitly initialize any
variables beforehand.
 As conclusion, while statement is essentially a for
statement without the initialization and increment
components.
 The syntax comparison between for and while,
for( ; condition; ) vs while(condition)
www.tenouk.com, ©

46/77
 Just like for and if statements, while statements can also
be nested.
 The nested while example
www.tenouk.com, ©

47/77
 The nested for and while program example
www.tenouk.com, ©

48/77
Repetition: The do-while loop
 Executes a block of statements as long as a specified condition is
true at least once.
 Test the condition at the end of the loop rather than at the
beginning, as demonstrated by the for and while loops.
 The do-while loop construct is,
do
statement(s);
while (condition)
next_statement;
 (condition) can be any valid C expression.
 statement(s) can be either a single or compound (a block of code) C
statement.
 When the program encounter the do-while loop, the following events occur:
1. The statement(s) are executed.
2. The (condition) is evaluated. If it is TRUE, execution returns to step
number 1. If it is FALSE, the loop terminates and the next_statement is
executed.
3. This means the statement(s) in the do-while will be executed at least
once. www.tenouk.com, ©

49/77
 A flow chart for the do-while loop
Stop
Evaluate
condition
T
F
Start
 The statement(s)
are always executed
at least once.
 for and while
loops evaluate the
condition at the start
of the loop, so the
associated
statements are not
executed if the
condition is initially
FALSE.
www.tenouk.com, ©

50/77
 The do-while program example
www.tenouk.com, ©

51/77
Other Program Controls
continue keyword
 continue keyword forces the next iteration to take
place immediately, skipping any instructions that may
follow it.
 The continue statement can only be used inside a loop
(for, do-while and while) and not inside a switch-
case selection.
 When executed, it transfers control to the condition (the
expression part) in a while or do-while loop, and to
the increment expression in a for loop.
 Unlike the break statement, continue does not force
the termination of a loop, it merely transfers control to the
next iteration.
www.tenouk.com, ©

52/77
 Consider the following continue keyword example
// using the continue in for structure
#include <stdio.h>
int main(void)
{
int iNum;
for(iNum = 1; iNum <= 10; iNum++)
{
// skip remaining code in loop only if iNum == 5
if(iNum == 5)
continue;
printf("%d ", iNum);
}
printf("nUsed continue to skip printing the value 5n");
return 0;
}
www.tenouk.com, ©

53/77
 Next consider the following continue keyword example,
www.tenouk.com, ©

54/77
 This loop sums up the even numbers 2, 4, 6, ... and stores the value in the nSum
variable.
 If the expression iNum % 2 (the remainder when iNum is divided by 2) yields a
non-zero value (i.e., if iNum is odd), the continue statement is executed and the
iteration repeated (iNum incremented and tested).
www.tenouk.com, ©

55/77
 If it yields a zero value (i.e., if iNum is even), the
statement nSum = nSum + iNum; is executed and
the iteration continued.
 When a continue statement executes, the next
iteration of the enclosing loop begins.
 The enclosing loop means the statements between the
continue statement and the end of the loop are not
executed.
 Try another continue example
www.tenouk.com, ©

56/77
goto keyword
 The goto statement is one of C unconditional jump or branching.
 When program execution encounters a goto statement, execution
immediately jumps, or branches, to the location specified by the goto
statement.
 The statement is unconditional because execution always branches
when a goto statement is came across, the branching does not
depend on any condition.
 A goto statement and its target label must be located in the same
function, although they can be in different blocks.
 Use goto to transfer execution both into and out of loop.
 However, using goto statement strongly not recommended.
 Always use other C branching statements.
 When program execution branches with a goto statement, no record
is kept of where the execution is coming from.
www.tenouk.com, ©

58/77
exit() function
 exit() function normally used when a program want to terminate
at any time.
 The exit() function terminates program execution and returns
control to the Operating System.
 The syntax of the exit() function is,
exit(status);
Status Description
0 (zero) The program terminated normally.
1 (or non-zero)
Indicates that the program terminated with some sort
of error. The return value is usually ignored.
www.tenouk.com, ©

59/77
 We must include the header file stdlib.h (cstdlib
if used in C++ code).
 This header file also defines two symbolic constants for
use as arguments to the exit() function, such as,
#define EXIT_SUCCESS 0
#define EXIT_FAILURE 1
 Then we can call the function like the following,
exit(EXIT_SUCCESS);
Or
exit(EXIT_FAILURE);
www.tenouk.com, ©

60/77
atexit() function
 Used to specify, or register, one or more functions that are
automatically executed when the program terminates.
 Exit-processing function that executes prior to program termination
 These functions are executed on a last-in, first-out (LIFO) basis,
the last function registered is the first function executed.
 When all functions registered by atexit() executed, the program
terminates and returns control to the OS.
 The prototype of the atexit() function is located in the stdlib.h
and the syntax is,
int atexit(void(*funct)(void));
 where funct is the function to be called.
www.tenouk.com, ©

61/77
 atexit() function takes a function pointer as its
argument and functions with atexit() must have a
return type of void.
 The functions passed to atexit() cannot take
parameters.
 atexit() uses the heap (instead of stack) to hold
the registered functions.
 The following program pushes three functions onto the
stack of functions to be executed when atexit() is
called.
 When the program exits, these programs are
executed on a last in, first out basis.
The atexit() function program example
www.tenouk.com, ©

62/77
system() function
 The system() function, enables the execution of OS
command from the C running program.
 Can be quite useful, for example, enabling the
program to do a directory listing or formatting a disk
without exiting the program.
 Must include the header file stdlib.h. The syntax is,
system("command");
 The command can be either a string constant or a
pointer to a string.
www.tenouk.com, ©

63/77
 For example, using an argument with the system()
function,
char *command = "dir";
system(command);
 After the OS command is executed, the program
continues at the location immediately following the
system() call.
 If the command passed to the system() function is not
a valid OS command, a bad command or file name error
message is displayed before returning to the program.
 The command can also be any executable or batch file to
be run.
www.tenouk.com, ©

65/77
return keyword
 The return statement has a form,
return expression;
 The action is to terminate execution of the current function
and pass the value contained in the expression (if any) to
the function that invoked it.
 The value returned must be of the same type or
convertible to the same type as the function's return type
(type casting).
 More than one return statement may be placed in a
function.
 The execution of the first return statement in the
function automatically terminates the function.
www.tenouk.com, ©

66/77
 The main() function has a default type int since it
returns the value 0 (an integer) to the environment.
 A function of type void will not have the expression
part following the keyword return.
 Instead, in this case, we may drop the entire return
statement altogether.
 If a function calls another function before it is defined,
then a prototype for it must be included in the calling
function.
 This gives information to the compiler to look for the
called function (callee).
www.tenouk.com, ©

67/77
#include <stdio.h>
int main(void)
{
int nNum = 20;
printf("Initial value of the nNum variable is %d", nNum);
return 0;
}
printf(“…“) definition
Caller
Callee
www.tenouk.com, ©

68/77
#include <stdio.h>
// prototype
void DisplayInteger(int);
void main(void)
{
int nNum = 30;
DisplayInteger(nNum);
}
void DisplayInteger(int iNum)
{
printf("The integer is %dn", iNum);
}
Caller
Callee
www.tenouk.com, ©

70/77
break keyword
 Already discussed in switch-case constructs.
 The break statement terminates the execution of the nearest enclosing loop or
conditional statement in which it appears. Control passes to the statement that
follows the terminated statement, if any.
 Used with the conditional switch statement and with the do, for, and while
loop statements.
 In a switch statement, break causes the program to execute the next
statement after the switch. Without a break statement, every statement from
the matched case label to the end of the switch, including the default, is
executed.
 In loops, break terminates execution of the nearest enclosing do, for, or while
statement. Control passes to the statement that follows the terminated statement,
if any.
 Within nested statements, the break statement terminates only the do, for,
switch, or while statement that immediately encloses it. You can use a
return or goto statement to transfer control from within more deeply nested
structures.
Program example on using break in for loop
www.tenouk.com, ©

71/77
abort() and terminate() functions
Function Description
abort()
Abort current process and returns error code defined in
stdlib.h
terminate()
Used when a handler for an exception cannot be found. The
default action to terminate is to call abort() and causes
immediate program termination. It is defined in except.h
(Microsoft uses eh.h and only compiled in C++).
1. The syntax is,
void abort( void );
1. abort() does not return control to the calling process. By default, it terminates
the current process and returns an exit code of 3.
2. By default, the abort routine prints the message:
"This application has requested the Runtime to terminate it in an
unusual way. Please contact the application's support team for
more information."
www.tenouk.com, ©

73/77
 terminate() function calls abort() or a function you specify
using set_terminate().
 terminate() function is used with C++ exception handling
and is called in the following cases:
1. A matching catch handler cannot be found for a thrown C++
exception.
2. An exception is thrown by a destructor function during stack
unwind.
3. The stack is corrupted after throwing an exception.
 terminate() calls abort() by default. You can change this
default by writing your own termination function and calling
set_terminate() with the name of your function as its
argument.
 terminate() calls the last function given as an argument to
set_terminate().
www.tenouk.com, ©

75/77
EOF
 We use EOF (acronym, stands for End Of File), normally
has the value –1, as the sentinel value.
 The user types a system-dependent keystroke
combination to mean end of file that means ‘I have no
more data to enter’.
 EOF is a symbolic integer constant defined in the
<stdio.h> header file.
 The keystroke combinations for entering EOF are system
dependent.
 On UNIX systems and many others, the EOF is <Return
key> or ctrl-z or ctrl-d.
 On other system such as old DEC VAX VMS or
Microsoft Corp MS-DOS, the EOF is ctrl-z.
www.tenouk.com, ©

76/77
 The EOF program example. (Press <Enter> + <Ctrl+z>
for EOF)
 If the value assigned to grade is equal to EOF, the
program terminates.
www.tenouk.com, ©

Cprogrammingprogramcontrols

Recommended

More Related Content

What's hot (20)

Similar to Cprogrammingprogramcontrols (20)

More from teach4uin (20)

Recently uploaded (20)

Cprogrammingprogramcontrols