Python file handlings

16. Python Files I/O
Printing to the Screen:
• The simplest way to produce output is using the print statement
where you can pass zero or more expressions, separated by
commas. This function converts the expressions you pass it to a
string and writes the result to standard output as follows:
print "Python is really a great language,", "isn't it?";
• This would produce following result on your standard screen:
Python is really a great language, isn't it?

Reading Keyboard Input:
Python provides two built-in functions to read a line of text from
standard input, which by default comes from the keyboard. These
functions are:
raw_input
input
The raw_input Function:
• The raw_input([prompt]) function reads one line from standard
input and returns it as a string (removing the trailing newline):
str = raw_input("Enter your input: ");
print "Received input is : ", str
• This would prompt you to enter any string and it would display
same string on the screen. When I typed "Hello Python!", it output is
like this:
Enter your input: Hello Python
Received input is : Hello Python

• The input Function:
• The input([prompt]) function is equivalent to raw_input, except that
it assumes the input is a valid Python expression and returns the
evaluated result to you:
str = input("Enter your input: ");
print "Received input is : ", str
• This would produce following result against the entered input:
Enter your input: [x*5 for x in range(2,10,2)]
Recieved input is : [10, 20, 30, 40]

Opening and Closing Files:
• Until now, you have been reading and writing to the standard input
and output. Now we will see how to play with actual data files.
• Python provides basic functions and methods necessary to
manipulate files by default. You can do your most of the file
manipulation using a file object.
• The open Function:
Before you can read or write a file, you have to open it using
Python's built-in open() function. This function creates a file object
which would be utilized to call other support methods associated
with it.
• Syntax:
file object = open(file_name [, access_mode][, buffering])

Paramters detail:
• file_name: The file_name argument is a string value that contains the name
of the file that you want to access.
• access_mode: The access_mode determines the mode in which the file has
to be opened ie. read, write append etc. A complete list of possible values is
given below in the table. This is optional parameter and the default file
access mode is read (r)
• buffering: If the buffering value is set to 0, no buffering will take place. If the
buffering value is 1, line buffering will be performed while accessing a file. If
you specify the buffering value as an integer greater than 1, then buffering
action will be performed with the indicated buffer size. If negative, the
buffer size is the system default(default behavior).

A list of the different modes of opening a file:
Modes Description
r Opens a file for reading only. The file pointer is placed at the beginning
of the file. This is the default mode.
rb Opens a file for reading only in binary format. The file pointer is placed
at the beginning of the file. This is the default mode.
r+ Opens a file for both reading and writing. The file pointer will be at the
beginning of the file.
rb+ Opens a file for both reading and writing in binary format. The file
pointer will be at the beginning of the file.
w Opens a file for writing only. Overwrites the file if the file exists. If the
file does not exist, creates a new file for writing.
wb Opens a file for writing only in binary format. Overwrites the file if the
file exists. If the file does not exist, creates a new file for writing.
w+ Opens a file for both writing and reading. Overwrites the existing file if
the file exists. If the file does not exist, creates a new file for reading
and writing.

A list of the different modes of opening a file:
wb+ Opens a file for both writing and reading in binary format. Overwrites
the existing file if the file exists. If the file does not exist, creates a new
file for reading and writing.
a Opens a file for appending. The file pointer is at the end of the file if the
file exists. That is, the file is in the append mode. If the file does not
exist, it creates a new file for writing.
ab Opens a file for appending in binary format. The file pointer is at the end
of the file if the file exists. That is, the file is in the append mode. If the
file does not exist, it creates a new file for writing.
a+ Opens a file for both appending and reading. The file pointer is at the
end of the file if the file exists. The file opens in the append mode. If the
file does not exist, it creates a new file for reading and writing.
ab+ Opens a file for both appending and reading in binary format. The file
pointer is at the end of the file if the file exists. The file opens in the
append mode. If the file does not exist, it creates a new file for reading
and writing.

The file object atrributes:
Once a file is opened and you have one file object, you can get
various information related to that file.
Here is a list of all attributes related to file object:
Attribute Description
file.closed Returns true if file is closed, false otherwise.
file.mode Returns access mode with which file was opened.
file.name Returns name of the file.
file.softspace Returns false if space explicitly required with print, true
otherwise.

• Example:
fo = open("foo.txt", "wb")
print "Name of the file: ", fo.name
print "Closed or not : ", fo.closed
print "Opening mode : ", fo.mode
print "Softspace flag : ", fo.softspace
• This would produce following result:
Name of the file: foo.txt
Closed or not : False
Opening mode : wb
Softspace flag : 0

The close() Method:
The close() method of a file object flushes any unwritten
information and closes the file object, after which no more
writing can be done.
Python automatically closes a file when the reference object
of a file is reassigned to another file. It is a good practice to
use the close() method to close a file.
• Syntax:
fileObject.close();
Example:
print "Name of the file: ", fo.name
fo.close()
Name of the file: foo.txt

Reading and Writing Files:
The file object provides a set of access methods to make our lives
easier. We would see how to use read() and write() methods to read
and write files.
The write() Method:
• The write() method writes any string to an open file. It is important
to note that Python strings can have binary data and not just text.
• The write() method does not add a newline character ('n') to the
end of the string:
Syntax:
fileObject.write(string);

Example:
fo.write( "Python is a great language.rnYeah its
great!!rn");
fo.close()
The above method would create foo.txt file and would write given
content in that file and finally it would close that file. If you would
open this file, it would have following content
Python is a great language.
Yeah its great!!

The read() Method:
The read() method read a string from an open file. It is important to
note that Python strings can have binary data and not just text.
Syntax:
fileObject.read([count]);
Here passed parameter is the number of bytes to be read from the
opend file. This method starts reading from the beginning of the file
and if count is missing then it tries to read as much as possible,
may be until the end of file.
Example:
fo = open("foo.txt", "r+")
str = fo.read(10);
print "Read String is : ", str
fo.close()
This would produce following result:
Read String is : Python is

File Positions:
• The tell() method tells you the current position within the file
in other words, the next read or write will occur at that many
bytes from the beginning of the file:
• The seek(offset[, from]) method changes the current file
position. The offset argument indicates the number of bytes
to be moved. The from argument specifies the reference
position from where the bytes are to be moved.
• If from is set to 0, it means use the beginning of the file as
the reference position and 1 means use the current position
as the reference position and if it is set to 2 then the end of
the file would be taken as the reference position.

Example:
fo = open("foo.txt", "r+")
str = fo.read(10);
print "Read String is : ", str
position = fo.tell();
print "Current file position : ", position
position = fo.seek(0, 0);
str = fo.read(10);
print "Again read String is : ", str
fo.close()
Read String is : Python is
Current file position : 10
Again read String is : Python is

Renaming and Deleting Files:
• Python os module provides methods that help you perform file-
processing operations, such as renaming and deleting files.
• To use this module you need to import it first and then you can all
any related functions.
The rename() Method:
The rename() method takes two arguments, the current filename
and the new filename.
Syntax:
os.rename(current_file_name, new_file_name)
Example:
import os
os.rename( "test1.txt", "test2.txt" )

The delete() Method:
You can use the delete() method to delete files by supplying the
name of the file to be deleted as the argument.
Syntax:
os.remove(file_name)
Example:
import os
os.remove("test2.txt")

Directories in Python:
All files are contained within various directories, and Python has no
problem handling these too. The os module has several methods
that help you create, remove, and change directories.
The mkdir() Method:
You can use the mkdir() method of the os module to create
directories in the current directory. You need to supply an argument
to this method, which contains the name of the directory to be
created.
Syntax:
os.mkdir("newdir")
Example:
import os # Create a directory "test"
os.mkdir("test")

The chdir() Method:
You can use the chdir() method to change the current directory. The
chdir() method takes an argument, which is the name of the
directory that you want to make the current directory.
Syntax:
os.chdir("newdir")
Example:
import os
os.chdir("/home/newdir")

The getcwd() Method:
The getcwd() method displays the current working directory.
Syntax:
os.getcwd()
Example:
import os
os.getcwd()

The rmdir() Method:
The rmdir() method deletes the directory, which is passed as an
argument in the method.
Before removing a directory, all the contents in it should be
removed.
Syntax:
os.rmdir('dirname')
Example:
import os
os.rmdir( "/tmp/test" )

File & Directory Related Methods:
There are three important sources which provide a wide range of
utility methods to handle and manipulate files & directories on
Windows and Unix operating systems. They are as follows:
– File Object Methods: The file object provides functions to
manipulate files.
– OS Object Methods.: This provides methods to process files as
well as directories.

Python file handlings

Recommended

More Related Content

Similar to Python file handlings (20)

Recently uploaded (20)

Python file handlings