IRJET - Implementation of Neural Network on FPGA

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 04 | Apr 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 1984
Implementation of Neural Network on FPGA
Ranjith M S1, Sampanna T2, Niranjan Ganapati Hegde3, Shruthi R4
1,2,3Student, Dept. of ECE, The National Institute of Engineering, Mysuru, India
4Assistant Professor, Dept. of ECE, The National Institute of Engineering, Mysuru, India
---------------------------------------------------------------------***----------------------------------------------------------------------
Abstract - Deep neural networks and their application is rapidly changing many of the fields by bringing a different way of
solution to the problems. In fact, it is being applied in every field right from Signal processing to the communication. Although it
solves many problems easily, training and deploying it is limited due to various reasons. These deep neural networks requiremost
powerful computational devices like GPU in order to train them and large RAM, memory is required for its operation limiting its
usage in many of the applications. Even if these resources are provided throughcloudthe deployment ofsystemfacesproblemslike
more latency as there is round trip to the server, connectivity, privacy as the data needs to leave the system. All these problems
could be overcome using the FPGA’s for the deployment of the neural network as they are low cost and reconfigurable. In fact,
FPGA’s are faster than GPU during inference in many of the cases makingitsuitableforthe deployment intherealtimeapplication.
FPGA’s are faster than GPU’s as the neural network is implemented as a hardware in case of FPGA’s, where only hardware delays
are introduced but in case of CPU or GPU large number of floating-point operationsneeds tobedoneusingALU. Wewill implement
a trained neural network of TensorFlow on FPGA using Verilog HDL to perform a regression task.
Key Words: Deep learning, FPGA, Regression, Verilog HDL, Artificial Intelligence, Neural Networks, TensorFlow
1. INTRODUCTION
Currently a variety of applications like image processing are deployed on FPGA’s because of their advantages like cost-
optimized system integration, differentiated designs for a wide range of embedded applications,a significantspeedadvantage
compared to processor-based solutions. Even complicated calculations can be carried out in an extremely short time using
FPGA’s.
Deep neural networks are employed for the various tasks in various fields like object detection, speech recognition, natural
language processing, segmentation most of these are deployed on GPU. We use FPGA to employ deep neural network for the
regression task. Hardware is generated for the trained neural network which includes many floating-point operations to be
performed before the prediction is done i.e., to obtain the output. Initially the network is implemented and trained in python
environment using TensorFlow and the values of the weights are obtained as an array from the trained model and these
floating-point numbers are converted into IEEE 754 double precision format. The whole network is then broken into floating
point multiplication and addition which is implemented using Verilog HDL. Since Verilog HDL does not perform floatingpoint
arithmetic by default we implement the modules to perform floating point addition and multiplication on IEEE 754 double
precision format based on their sign, exponent and mantissa part.
Since we are using only dense networks we use He initialization[1] as compared with Xavier Initialization[2] for initializing the
weights while training the network.
“"overfitting" is greatly reduced by randomly omittinghalf ofthefeaturedetectorsoneachtrainingcase. Thispreventscomplexco-
adaptations in which a feature detector is only helpful in the context of several other specific feature detectors. Instead, each
neuron learns to detect a feature that is generally helpful for producing the correctanswergiventhecombinatoriallylargevariety
of internal contexts in which it must operate. Random "dropout" gives big improvements on many benchmark tasks”[3].
The optimizers such as Adam[4], rms[5], LARS[6] leads for the faster convergence and better optimization withoutgettingstuck
at the saddle points or at the local minima’s. “One of the key elements of super-convergence is training with one learning rate
cycle and a large maximum learning rate”[7]. To speed up training we use Batch Normalization[8].

2. EXPERIMENTAL SETUP
2.1 Dataset
The dataset contains sold prices of many houses with their information like overall area in square feet. The maximum valueof
the area is 1.306800e+06 whereas the maximum value of the pricecolumnis3600.Iftheserawvaluesofthedatasetarepassed
into the network for training, it leads to overshooting and also slows the rate of convergence as the loss surface is not smooth.
The loss surface will have large number of saddle points making it difficult for training. These problems could be overcomeby
doing the mean normalization on the data before training and same has to be applied during the inference.
Mean normalization is given by,
Where μ(i) is the average of all the values for a featureand s(i)is the standard deviation.Aftermeannormalizationthemeanofa
feature is nearly 0 and standard deviation is nearly 1. Which counters the vanishing gradient problem.
Fig-1 represent how the price varies with area before the mean normailzation is applied.
fig-1: Dataset
2.2 Training the Neural Network
We implemented two architectures for the same dataset, perceptron and the neural network (multi-output perceptron). The
perceptron is implemented in python environment and the gradient descent algorithm is used tofindtheoptimal values ofthe
weight and bias. Mean squared error is used as a cost function based on this the parameters are optimized.
Neural network is implemented and trained using TensorFlowlibraryinpython environment.The network has2hiddenlayers
and an output layer. First hidden layer has 8 hidden units to whichReLUactivationisappliedthepurposeofactivationfunction

is to introduce the non-linearities in the network. The output of the activation is applied to the second dense layer with the 4
hidden units, output of which is then applied with ReLU activation and these values are used to predict the final output. The
network architecture is as shown in fig-2. And the structure parameter and its dimension are as in table-1.
fig -2: Neural network architecture
Table -1: Network structure
Model structure and parameters
Layer Output shape NO. of parameters
Input (None, 1) 0
Dense_1 (None, 8) 16
Dense_2 (None, 4) 36
Output (None, 1) 5
Total params: 57
Trainable params: 57
Non-trainable params: 0
The network is trained using Adam optimizer with a batch size of 32 and the data is split into 90% for training and 10% for
validation. Mean squared error is used as a loss function.
Table -2: Network results after training
Final loss
Mean Squared Error
Training 0.2753
validation 0.2088

fig -3: loss during training for neural network fig -4: loss during training in perceptron
From table-2 we see the mean squared error values after training the neural network. Since the values of training error and
validation error are near it indicates that the model is not overfitted to the training data.
Fig-3 indicates how the loss (mean squared error) varied during the training of the neural network andfig-4indicateshowthe
loss (mean squared error) varied during the training (only training data) of the perceptron.Inboththecaseslossreachedvery
low value by the end of the training indicating that they have learnt to predict the proper values of the target.
The model was trained on Tesla K80 GPU which can do up to 8.73 Teraflops single-precision and up to 2.91 Teraflops double-
precision performance with NVIDIA GPU Boost
3. IMPLEMENTATION OF TRAINED MODEL IN VERILOG HDL
The trained network is implemented in Verilog HDL to perform the inference. Since the network implementation includes the
floating-point arithmetic and Verilog does not have any functions for the floating-point operations the operations have to be
implemented based on the sign, exponent and mantissa. The optimized weights are converted into IEEE 754 double precision
format having 64 bits.
fig-5 IEEE 754 double precision format
Fig-5 shows the representation of the IEEE 754 double precisionformat.First bitindicatessign1indicatenegativenumberand
0 indicate positive number. Bit 62 to 52 indicates the exponent part and other bits indicates fractional part.
In floating point multiplication, the result will be negative if any one of the numbers is negative, result will be positive if both
are negative or positive which indicates the behaviour of XOR gate. Hence the resultant sign bit of the output is determined by
XOR of two sign bits of the numbers.
Exponent part of the resultant is determined by using the formula,
Er = E1 +E2-1023

Where E1 and E2 are the exponent part of two numbers. Hence the 11-bit adder is required for the exponent part of the
resultant.
Fractional part is obtained by the normal multiplication between fractional parts of the number. And result is rounded to 52
bits. Hence the multiplier is implemented for the fractional part.
Hence all the trained network parameters are converted into IEEE 754 double precision format and the whole network is
implemented using these floating-point operation modules. The module now takes the input andoperationsaredone withthe
optimized weights to get the prediction.
Fig-6: Simulation output
From fig-6 we observe the output prediction (output_z) of the implemented hardware for the given mean normalized input
square feet.
4. RESULTS AND CONCLUSIONS
The implemented hardware using Verilog HDL produced the same result as that of the GPU or CPU which computes the result
using ALU.
The hardware implementation reduces the latency when compared with GPU or CPUinmanycases.Buttheimplementationof
the neural network on the hardware takes more time and the training of neural network is not possible in FPGA as there are
more training loops involved and the gradient computation and their update.
REFERENCES
[1] Kaiming He, Xiangyu Zhang, Shaoqing Ren, Jian Sun. Delving Deep into Rectifiers: Surpassing Human-Level
Performance on ImageNet Classification
[2] Bengio, Yoshua and Glorot, Xavier. Understanding thedifficulty of training deep feedforward neural
networks.InProceedings of AISTATS 2010, volume 9, pp. 249–256, May 2010.
[3] Geoffrey E. Hinton, Nitish Srivastava, Alex Krizhevsky, Ilya Sutskever, Ruslan R. Salakhutdinov Improving neural
networks by preventing co-adaptation of feature detectors arXiv:1207.0580v1 [cs.NE]

[4] Diederik P. Kingma, Jimmy Ba. Adam: A Method for Stochastic Optimization. arXiv:1412.6980v9 [cs.LG]
[5] Geoffrey Hinton. 2012. Neural Networks for MachineLearning - Lecture 6a - Overview of mini-batch gradi-ent
descent.
[6] Yang You, Igor Gitman, Boris Ginsburg. Large Batch Training of Convolutional Networks. arXiv:1708.03888v3
[cs.CV]
[7] Leslie N. Smith, Nicholay Topin. Super-Convergence: Very Fast Training of Neural Networks Using Large Learning
Rates. arXiv:1708.07120v3 [cs.LG]
[8] Sergey Ioffe, Christian Szegedy. Batch Normalization: Accelerating Deep Network Training by Reducing Internal
Covariate Shift. arXiv:1502.03167v3 [cs.LG]
[9] Alexandre de Brébisson, Étienne Simon, Alex Auvolat, Pascal Vincent, Yoshua Bengio. Artificial Neural Networks
Applied to Taxi Destination Prediction. arXiv:1508.00021v2 [cs.LG]
[10] Abadi, M., Barham, P., Chen, J., Chen, Z., Davis, A., Dean, J., Devin, M., Ghemawat, S.,Irving, G., Isard, M., Kudlur, M.,
Levenberg, J., Monga, R., Moore, S., Murray, D. G.,Steiner, B., Tucker, P., Vasudevan, V., Warden, P., Wicke,M.,Yu,Y.,and
Zheng, X. TensorFlow: Large-Scale Machine Learning on Heterogeneous Distributed Systems. arXiv:1603.04467
[cs.DC]
[11] J. D. Hunter, "Matplotlib: A 2D Graphics Environment", Computing in Science & Engineering, vol. 9, no. 3, pp. 90-95,
2007.
[12] Plotly Technologies Inc. (2015). Collaborative data science. Montreal, QC: Plotly Technolo-gies Inc.
[13] S. Sahin, Y. Becerik1i, S. Yazici, "Neural network implementation in hardware using FPGAs", NIP Neural Information
Processing, vol. 4234, no. 3, pp. 1105-1112, 2006.
[14] Ranjith M S, S Parameshwara. Optimizing Neural Networks for Embedded Systems. IRJET Volume 7, Issue 4, April
2020 S.NO: 211
[15] Yufeng Hao. A General Neural Network Hardware Architecture on FPGA
arXiv:1711.05860 [cs.CV]
[16] S. Coric, I. Latinovic and A. Pavasovic, "A neural network FPGA implementation," Proceedings of the 5th Seminar on
Neural Network Applications in Electrical Engineering. NEUREL 2000 (IEEE Cat. No.00EX287), Belgrade, Yugoslavia,
2000, pp. 117-120.

IRJET - Implementation of Neural Network on FPGA

Recommended

More Related Content

What's hot (16)

Similar to IRJET - Implementation of Neural Network on FPGA (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET - Implementation of Neural Network on FPGA