computer notes - Priority queue

ecomputernotes.com Data Structures Lecture No. 11
___________________________________________________________________

Data Structures

Lecture No. 11

In the previous lecture, we demonstrated the technique of data structure priority queue
with the help of the example from the banking system. Data structure priority queue is
a variation of queue data structure to store the events. We have witnessed this
simulation by animation. The simulation and animation help a programmer to
understand the functionality of a program. As these are not the part of the current
course, so we will study simulation and animation in detail in the coming courses.
A queue is a FIFO structure (i.e. first in first out). But there are its variations
including the priority queue, discussed in the previous lecture. In priority queue, we
were adding data to a queue but did not get the data from the queue by First In, First
Out (FIFO) rule. We put events in the queue and got these from the queue with
respect to the time of occurrence of the event. Thus we get the items from a priority
queue in a particular order with respect to a priority given to the items (events). The
priority queue is also an important data structure. Let s see its implementation.

Implementation of Priority Queue

In the priority queue, we put the elements in the queue to get them from the queue
with a priority of the elements. Following is the C++ code of the priority queue.

#include "Event.cpp"
#define PQMAX 30

class PriorityQueue
{
public:
PriorityQueue()
{
size = 0; rear = -1;
};
~PriorityQueue() {};
int full(void)
{
return ( size == PQMAX ) ? 1 : 0;
};

Event* remove()
{
if( size > 0 )
{
Event* e = nodes[0];
Page 1 of 17

___________________________________________________________________

for(int j=0; j < size-2; j++ )
nodes[j] = nodes[j+1];
size = size-1; rear=rear-1;
if( size == 0 ) rear = -1;
return e;
}
return (Event*)NULL;
cout << "remove - queue is empty." << endl;
};

int insert(Event* e)
{
if( !full() )
{
rear = rear+1;
nodes[rear] = e;
size = size + 1;
sortElements(); // in ascending order
return 1;
}
cout << "insert queue is full." << endl;
return 0;
};

int length() { return size; };
};

In this code, the file Events.cpp has been included. Here we use events to store in the
queue. To cater to the need of storing other data types too, we can write the
PriorityQueue class as a template class.
In the above code, we declare the class PriorityQueue. Then there is the public part of
the class. In the public part, at first a programmer encounters the constructor of the
class. In the constructor, we assign the value 0 to size and 1 to rear variables. A
destructor, whose body is empty, follows this. Later, we employ the method full()
which checks the size equal to the PQMAX to see whether the queue is full. If the size
is equal to PQMAX, the function returns 1 i.e. TRUE. Otherwise, it returns 0 i.e.
FALSE. We are going to implement the priority queue with an array. We can also use
linked list to implement the priority queue. However, in the example of simulation
studied in the previous lecture, we implemented the queue by using an array. We have
seen in the simulation example that there may be a maximum of five events. These
events include one arrival event and four departure events. That means four queues
from where the customers go to the teller and one to go out of the bank after the
completion of the transaction. As we know that there is a need of only five queues, so
it was decided to use the array instead of dynamic memory allocation and
manipulating the pointers.
In the remove() method, there are some things which are the property of the priority
queue. We don t have these in the queue. In this method, first of all we check the size
of the priority queue to see whether there is something in the queue or not. If size is
greater than 0 i.e. there are items in the queue then we get the event pointer (pointer to
the object Event) e from the first position (i.e. at index 0) of the array, which we are
Page 2 of 17

___________________________________________________________________

using internally to implement the queue. At the end of the method, we return this
event object e. This means that we are removing the first object from the internal
array. We already know that the removal of an item from the start of an array is very
time consuming as we have to shift all the remaining items one position to the left.
Thus the remove() method of the queue will execute slowly. We solved this problem
by removing the item from the position where the front pointer is pointing. As the
front and rear went ahead and we got empty spaces in the beginning, the circular
array was used. Here, the remove() method is not removing the element from the
front. Rather, it is removing element from the first position (i.e. index 0). Then we
execute a for loop. This for loop starts from 0 and executes to size-2. We can notice
that in this for loop, we are shifting the elements of the array one position left to fill
the space that has been created by removing the element from the first position. Thus
the element of index 1 becomes at index 0 and element of index 2 becomes at index 1
and so on. Afterwards, we decrease size and rear by 1. By decreasing the size 1 if it
becomes zero, we will set rear to 1. Now by the statement

return e ;

We return the element (object e), got from the array. The outer part of the if block

return (Event*)NULL;
cout << "remove - queue is empty." << endl;

is executed if there is nothing in the queue i.e. size is less than 0. Here we return
NULL pointer and display a message on the screen to show that the queue is empty.
Now let s look at the insert() method. In this method, first of all we check whether the
array (we are using internally) is full or not. In case, it is not full, we increase the
value of rear by 1. Then we insert the object e in the nodes array at the position rear.
Then the size is increased by 1 as we have inserted (added) one element to the queue.
Now we call a method sortElements() that sorts the elements of the array in an order.
We will read different algorithms of sorting later in this course.
We have said that when we remove an element from a priority queue, it is not
according to the FIFO rule. We will remove elements by some other rule. In the
simulation, we had decided to remove the element from the priority queue with
respect to the time of occurrence of an event (arrival or departure). We will remove
the element (event) whose time of occurrence is before other events. This can be
understood from the example of the traffic over a bridge or crossing. We will give
higher priority to an ambulance as compared to a bus. The cars will have the lower
priority. Thus when a vehicle has gone across then after it we will see if there is any
ambulance in the queue. If it is there, we will remove it from the queue and let go
across the bridge. Afterwards, we will allow a bus to go and then the cars. In our
simulation example, we put a number i.e. time of occurrence, with the object when we
add it to the queue. Then after each insertion, we sort the queue with these numbers in
ascending order. Thus the objects in the nodes array get into an order with respect to
the time of their occurrence. After sorting, the first element in the array is the event,
going to be occurring earliest in the future. Now after sorting the queue we return 1
that shows the insert operation has been successful. If the queue is full, we display a
message to show that the queue is full and return 0, indicating that the insert operation
had failed.
Then there comes the length() method, having a single statement i.e.

Page 3 of 17

___________________________________________________________________

return size ;
This method returns the size of the queue, reflecting the number of elements in the
queue. It is not the size of the array used internally to store the elements of the queue.
We have seen the implementation of the priority queue by using an array. We will use
the priority queue in some other algorithms later. Now, we will see another
implementation of the priority queue using some thing other than array, which is
much better than using an array. This will be more efficient. Its remove and insert
methods will be faster than the ones in array technique. Here in the simulation, we
were making only five queues for the events. Suppose, if these go to hundreds or
thousands, a lot of time will be spent to remove an element from the queue. Similarly,
when an element is added, after adding the element, to sort the whole array will be a
time consuming process. Thus the application, with the use of the priority queue, will
not be more efficient with respect to the time.

Tree

Now let s talk about a data structure called tree. This is an important data structure.
This data structure is used in many algorithms. We will use it in most of our
assignments. The data structures that we have discussed in previous lectures are linear
data structures. The linked list and stack are linear data structures. In these structures,
the elements are in a line. W e put and get elements in and from a stack in linear order.
Queue is also a linear data structure as a line is developed in it. There are a number of
applications where linear data structures are not appropriate. In such cases, there is
need of some non-linear data structure. Some examples will show us that why non-
linear data structures are important. Tree is one of the non-linear data structures.
Look at the following figure. This figure (11.1) is showing a genealogy tree of a
family.

Muhammad Aslam Khan
T
.

Sohail Aslam Javed Aslam Yasmeen Aslam

Haaris Saad Qasim Asim Fahd Ahmed Sara Omer

In this genealogy tree, the node at the top of the tree is Muhammad Aslam Khan i.e.
the head of the family. There are three nodes under this one. These are Sohail Aslam,
Javed Aslam and Yasmeen Aslam. Then there are nodes under these three nodes i.e.
the sons of these three family members. You may have seen the tree like this of some
other family. You can make the tree of your family too. The thing to be noted in this
genealogical tree is that it is not a linear structure like linked list, in which we have to
tell that who is the father and who is the son. We make it like a tree. We develop the
tree top-down, in which the father of the family is on the top with their children
downward. We can see the similar tree structure of a company. In the tree of a
Page 4 of 17

___________________________________________________________________

company, the CEO of the company is on the top, followed downwardly by the
managers and assistant managers. This process goes downward according to the
administrative hierarchy of the company. Our tree structure is different from the
actual tree in the way that the actual tree grows from down to up. It has root downside
and the leaves upside. The data structure tree is opposite to the real tree as it goes
upside down. This top-down structure in computer science makes it easy to
understand the tree data structure.
There may be situations where the data, in our programs or applications, is not in the
linear order. There is a relationship between the data that cannot be captured by a
linked list or other linear data structure. Here we need a data structure like tree.
In some applications, the searching in linear data structures is very tedious. Suppose
we want to search a name in a telephone directory having 100000 entries. If this
directory is in a linked list manner, we will have to traverse the list from the starting
position. We have to traverse on average half of the directory if we find a name. We
may not find the required name in the entire directory despite traversing the whole
list. Thus it would be better to use a data structure so that the search operation does
not take a lot of time. Taking into account such applications, we will now talk about a
special tree data structure, known as binary tree.

Binary Tree

The mathematical definition of a binary tree is
A binary tree is a finite set of elements that is either empty or is partitioned into three
disjoint subsets. The first subset contains a single element called the root of the tree.
The other two subsets are themselves binary trees called the left and right sub-trees .
Each element of a binary tree is called a node of the tree.
Following figure shows a binary tree.

A

B C

F
D E

H I
G

Fig 11.2: A Binary Tree

There are nine nodes in the above figure of the binary tree. The nine nodes are A, B,
C, D, E, F, G, H, and I. The node A is at the top of the tree. There are two lines from
Page 5 of 17

___________________________________________________________________

the node A to left and right sides towards node B and C respectively. Let s have a
look at the left side of the node A. There are also two lines from node B to left and
right, leading to the nodes D and E. Then from node, E there is only one line that is to
the left of the node and leads to node G. Similarly there is a line from node C towards
the node F on right side of the node C. Then there are two lines from node F that leads
to the nodes H and I on left and right side respectively.

Now we analyze this tree according to the mathematical definition of the binary tree.
The node A is the root of the tree. And tree structure (i.e. the nodes B, D, E, G and
their relation) on the left side of the node A is a sub-tree, called the Left subtree.
Similarly the nodes (C, F, H and I) on the right side of the node A comprise the sub-
tree termed as Right subtree. Thus we made three parts of the tree. One part contains
only one node i.e. A while the second part has all the nodes on left side of A, called as
Left subtree. Similarly the third part is the Right subtree, containing the nodes on right
side of A. The following figure depicts this scenario.

Page 6 of 17

___________________________________________________________________

Root
A

B C

F
D E

H I
G

Left subtree Right subtree

Fig 11.3: Analysis of a binary tree

The same process of sub classing the tree can be done at the second level. That means
the left and right subtrees can also be divided into three parts similarly. Now consider
the left subtree of node A. This left subtree is also a tree. The node B is the root of this
tree and its left subtree is the node D. There is only one node in this left subtree. The
right subtree of the node B consists of two nodes i.e. E and G. The following figure
shows the analysis of the tree with root B.

Page 7 of 17

___________________________________________________________________

A
Root

B C

F
D E

H I
G

Left subtree

Right subtree


On going one step down and considering right subtree of node B, we see that E is the
root and its left subtree is the single node G. There is no right subtree of node E or we
can say that its right subtree is empty. This is shown in the following figure.
A

B C

Root F
D E

H I
G

Leftsubtree
Now the left sub tree of E is the single node G. This node G can be considered as the
Page 8 of 17

___________________________________________________________________

root node with empty left and right sub trees.

The definition of tree is of recursive nature. This is due to the fact that we have seen
that which definition has been applied to the tree having node A as root, is applied to
its subtrees one level downward. Similarly as long as we go down ward in the tree the
same definition is used at each level of the tree. And we see three parts i.e. root, left
subtree and right subtree at each level.
Now if we carry out the same process on the right subtree of root node A, the node C
will become the root of this right subtree of A. The left subtree of this root node C is
empty. The right subtree of C is made up of three nodes F, H and I. This is shown in
the figure below.

A

Root
B C

F
D E

H I
G

Right subtree


Now we apply the same recursive definition on the level below the node C. Now the
right subtree of the node C will be considered as a tree. The root of this tree is the
node F. The left and right subtrees of this root F are the nodes H and I respectively.
The following figure depicts this.

Page 9 of 17

___________________________________________________________________

A

B C
Root

F
D E

H I
G

Left subtree Right subtree


We make (draw) a tree by joining different nodes with lines. But we cannot join any
nodes whichever we want to each other. Consider the following figure.

A

B C

F
D E

H I
G

Fig 11.8: A non-tree structure

Page 10 of 17

___________________________________________________________________

It is the same tree, made earlier with a little modification. In this figure we join the
node G with D. Now this is not a tree. It is due to the reason that in a tree there is
always one path to go (from root) to a node. But in this figure, there are two paths
(tracks) to go to node G. One path is from node A to B, then B to D and D to G. That
means the path is A-B-D-G. We can also reach to node G by the other path that is the
path A-B-E-G. If we have such a figure, then it is not a tree. Rather, it may be a graph.
We will discuss about graphs at the end of this course.
Similarly if we put an extra link between the nodes A and B, as in the figure below,
then it is also no more a tree. This is a multiple graph as there are multiple (more than
1) links between node A and B.

A

B C

F
D E

H I
G


Similarly if we put other links between different nodes, then the structure thus
developed will not be a tree. The following figure is also an example of a structure
that is not a tree as there are multiple links between the different nodes.

Page 11 of 17

___________________________________________________________________

A

B C

F
D E

H I
G


Terminologies of a binary tree

Now let s discuss different terminologies of the binary tree. We will use these
terminologies in our different algorithms. Consider the following figure.

parent
A

Left descendant Right descendant

B C

F
D E

H I
G

Leaf nodes
Leaf nodes

Fig 11.11: Terminologies used in a binary tree

Page 12 of 17

___________________________________________________________________

We have discussed that the node on the top is said root of the tree. If we consider the
relationship of these nodes, A is the parent node with B and C as the left and right
descendants respectively. C is the right descendant of A. Afterwards, we look at the
node B where the node D is its left descendant and E is its right descendant. We can
use the words descendant and child interchangeably. Now look at the nodes D, G, H
and I. These nodes are said leaf nodes as there is no descendant of these nodes. We
are just introducing the terminology here. In the algorithms, we can use the words root
or parent, child or descendant. So the names never matter.

Strictly Binary Tree

There is a version of the binary tree, called strictly binary tree. A binary tree is said to
be a strictly binary tree if every non-leaf node in a binary tree has non-empty left and
right subtrees.
Now consider the previous figure 11.11. We know that a leaf node has no left or right
child. Thus nodes D, G, H and I are the leaf nodes. The non-leaf nodes in this tree are
A, B, C, E and F. Now according to the definition of strictly binary tree, these non-
leaf nodes (i.e. A, B, C, E and F) must have left and right subtrees (Childs). The node
A has left child B and right child C. The node B also has its left and right children that
are D and E respectively. The non-leaf node C has right child F but not a left one.
Now we add a left child of C that is node J. Here C also has its left and right children.
The node F also has its left and right descendants, H and I respectively. Now the last
non-leaf node E has its left child, G but no right one. We add a node K as the right
child of the node E. Thus the tree becomes as shown below in the figure 11.12.

A

B C

J F
D E

K H I
G

Fig 11.12: A Strictly binary tree

Now all the non-leaf nodes (A, B, C, E and F) have their left and right children so
according to the definition, it is a strictly binary tree.

Page 13 of 17

___________________________________________________________________

Level

The level of a node in a binary tree is defined as follows:
• Root has level 0,
• Level of any other node is one more than the level its parent (father).
• The depth of a binary tree is the maximum level of any leaf in the tree.
To understand level of a node, consider the following figure 11.13. This figure shows
the same tree of figure 11.2, discussed so far.

A 0 ---------------------------------------- Level 0

B 1 C 1 ------------------- Level 1

F
D 2 E 2 2 ------- Level 2

H I
G 3 3 3 -Level 3

Fig 11.13: Level of nodes of a tree

In the above figure, we have mentioned the level of each node. The figure also shows
that the root node has level 0. We have talked in the definition of the level that the
level of a node, other than root, is one more than the level of its parent. Now in the
tree, the parent of nodes B and C is node A with level 0. Now by definition, the level
of B and C will be 1 (i.e. level of A + 1). Now if go downward in the tree and see the
nodes D, E and F, the parent node of D and E is B the level of which is 1. So the level
of D and E is 2 (i.e. 1 + 1). Similarly the level of F is 2 as the level of its parent (i..e.
C) is 1. In the same way, we can easily understand that the level of G, H and I is 3 as
the parent nodes of these (E and F) have level 2. Thus we see that tree has multi levels
in the downward direction. The levels of the tree increase, as the tree grows
downward more. The number of nodes also increases.
Now let s talk why we call it a binary tree. We have seen that each node has a
maximum of two subtrees. There might be two, one or no subtree of a node. But it
cannot have more than two. So, we call such a tree a binary one due to the fact that a
node of it can have a maximum of two subtrees. There are trees whose nodes can have
more than two subtrees. These are not binary trees. We will talk about these trees
later.
By seeing the level of a tree, we can tell the depth of the tree. If we put level with
each node of the binary tree, the depth of a binary tree is the maximum level. In the
figure 11.13, the deepest node is at level 3 i.e. the maximum level is 3. So the depth
of this binary tree is 3.

Page 14 of 17

___________________________________________________________________

Complete Binary Tree

Now, if there are left and right subtrees for each node in the binary tree as shown
below in figure 11.14, it becomes a complete binary tree.

A
0

B 1 C 1

D E F G
2 2 2 2

H I J K L M N O
3 3 3 3 3 3 3 3

Fig 11.14: A Complete Binary Tree

The definition of the complete binary tree is
A complete binary tree of depth d is the strictly binary tree all of whose leaves are at
level d .
Now look at the tree, the leaf nodes of the tree are at level 3 and are H, I, J, K, L, M,
N and O. There is no such a leaf node that is at some level other than the depth level d
i.e. 3. All the leaf nodes of this tree are at level 3 (which is the depth of the tree i.e. d).
So this is a complete binary tree. In the figure, all the nodes at level 3 are highlighted.
We know that the property of the binary tree is that its node can have a maximum of
two subtrees, called as left and right subtrees. The nodes increase at each level, as the
tree grows downward. In a complete binary tree, the nodes increase in a particular
order. If we reconsider the previous tree (figure 11.14), we note that the number of
node at level 0 is 1. We can say it 20, as 20 is equal to 1. Down to this, the node is the
level 1 where the number of nodes is 2, which we can say 21, equal to 2. Now at the
next level (i.e. level 2), the number of nodes is 4 that mean 22. Finally the number of
nodes at level 3 is 8, which can be called as 23. This process is shown pictorially in
the following figure 11.15.

Page 15 of 17

___________________________________________________________________

A ------------- Level 0: 20 nodes

B ---------- Level 1: 21 nodes ---------- C

D -------------- E Level 2: 22 nodes F ----------------- G

H I J K L M N O
-

------------------------------------ Level 3: 23 nodes --------------------------------------------

Fig 11.15: Number of nodes at each level in a complete binary tree

By observing the number of nodes at a particular level, we come to the conclusion
that the number of nodes at a level is equal to the level number raising to the power of
two. Thus we can say that in a complete binary tree at a particular level k, the number
of nodes is equal to 2k. Note that this formula for the number of nodes is for a
complete binary tree only. It is not necessary that every binary tree fulfill this
criterion. Applying this formula to each level while going to the depth of the tree (i.e.
d), we can calculate the total number of nodes in a complete binary tree of depth d by
adding the number of nodes at each level. This can be written as the following
summation.
20+ 21+ 22 + + 2d = Σd j=0 2j = 2d+1 1

Thus according to this summation, the total number of nodes in a complete binary tree
of depth d will be 2d+1 1. Thus if there is a complete binary tree of depth 4, the
total number of nodes in it will be calculated by putting the value of d equal to 4. It
will be calculated as under.

24+1 - 1 = 25 1 = 32 1 = 31

Thus the total number of nodes in the complete binary tree of depth 4 is 31.

We know that the total number of nodes (leaf and non-leaf) of a complete binary tree
of depth d is equal to 2d+1 1. In a complete binary tree, all the leaf nodes are at the
depth level d. So the number of nodes at level d will be 2d . These are the leaf nodes.
Thus the difference of total number of nodes and number of leaf nodes will give us
the number of non-leaf (inner) nodes. It will be (2d+1 1) 2d i.e. 2d 1. Thus we
conclude that in a complete binary tree, there are 2d leaf nodes and 2d 1 non-leaf
(inner) nodes.

Page 16 of 17

___________________________________________________________________

Level of a Complete Binary Tree

We can conclude some more results from the above mathematical expression. We can
find the depth of a complete binary tree if we know the total number of nodes. If we
have a complete binary tree with n total nodes, then by the equation of the total
number of nodes we can write
Total number of nodes = 2d+1 1 = n
To find the value of d, we solve the above equation as under

2d+1 1 = n
2d+1 = n + 1
d + 1 = log2 (n + 1)
d = log2 (n + 1) 1

After having n total nodes, we can find the depth d of the tree by the above equation.
Suppose we have 100,000 nodes. It means that the value of n is 100,000, reflecting a
depth i.e. d of the tree will be log2 (100000 + 1) 1, which evaluates to 20. So the
depth of the tree will be 20. In other words, the tree will be 20 levels deep. The
significance of all this discussion about the properties of complete binary tree will
become evident later.

Operations on Binary Tree

We can define different operations on binary trees.
If p is pointing to a node in an existing tree, then
• left(p) returns pointer to the left subtree
• right(p) returns pointer to right subtree
• parent(p) returns the father of p
• brother(p) returns brother of p.
• info(p) returns content of the node.

We will discus these methods in detail in next lecture.

Tips

• A priority queue is a variation of queue that does not follow FIFO rule.
• Tree is a non-linear data structure.
• The maximum level of any leaf in a binary tree is called the depth of the tree.
• Other than the root node, the level of each node is one more than the level of
its parent node.
• A complete binary tree is necessarily a strictly binary tree but not vice versa.
• At any level k, there are 2k nodes at that level in a complete binary tree.
• The total number of nodes in a complete binary tree of depth d is 2d+1 1.
• In a complete binary tree there are 2d leaf nodes and 2d 1 non-leaf nodes.

Page 17 of 17

computer notes - Priority queue

Recommended

More Related Content

What's hot (20)

Viewers also liked (19)

Similar to computer notes - Priority queue (20)

More from ecomputernotes (20)

Recently uploaded (20)

computer notes - Priority queue