Emulsions - Definition, Types, Preparation, Properties
Last Updated :
28 Jan, 2022
Did you know that "emulsion" comes from the Latin word "mulgeo," which meaning "to milk"? Milk is a fat-water emulsion containing a variety of additional ingredients. But what precisely are Emulsions, and what role do they play in our daily lives and in the workplace?
Emulsions are combinations of two or more types of liquids, one of which is a droplet of microscopic or even nanoscale size that is spread throughout the other. These are often made from liquid components in their natural state or, more commonly, through methods such as agitation, assuming that the fluids being mixed do not have any mutual solubility. Let take a closer look at each of them individually.
Emulsions
"Colloidal solutions in which both the dispersed phase and the dispersion medium are liquids are known as emulsions."
Milk, which has fat globules scattered in the water, is a nice example of an emulsion. Emulsified globules are about 10-6m in size. In some ways, emulsions are similar to lyophobic sols.
A set of mixed systems known as solutions, gels, or suspensions are also referred to as emulsions. Consider the photographic emulsion, which is a gelatin gel with microscopic crystals distributed throughout. Other types of emulsions include butter, which is a water-in-fat emulsion, and egg yolks with lecithin.
Types of Emulsions
Emulsions are characterized as follows based on the nature of the dispersed phase:
- Oil-in-water Emulsions (O/W): An oil-in-water emulsion is one in which oil serves as the dispersed phase and water serves as the dispersion medium. A good example of an oil-in-water emulsion is milk. Liquid fat globules in milk are distributed in the water. Other examples are disappearing cream and so on.
- Water-in-oil Emulsions(W/O): A water-in-oil emulsion is one in which water serves as the dispersed phase and oil serves as the dispersion medium. Oil emulsions are another name for these emulsions. Emulsions such as butter and cold cream are common examples. Other examples are cod liver oil and so on.
Preparation of Emulsion
Emulsions are made by vigorously churning a mixture of the necessary oil and water with a high-speed mixer or ultrasonic vibrators. Simple mechanical stirring results in unstable emulsions. Oil and water have a tendency to separate. A suitable stabilizing agent is usually added to achieve a stable emulsion. An emulsifier or emulsifying agent is the name of the stabilizing ingredient. In the beginning, the emulsifier is combined with the oil and water.
Soaps, detergents, long-chain sulphonic acid, and lyophilic colloids such as gelatin, albumin, and casein are examples of compounds that can operate as emulsifiers.
Nature of Emulsion
In the event of a certain emulsion, different emulsifiers may behave differently.
For Example :
- Preparing oil-in-water emulsions requires sodium oleate.
- Water-in-oil is made with magnesium and calcium oleates. When calcium oleate is introduced to a sodium oleate-stabilized emulsion, the system's stability suffers. The oil-in-water emulsion becomes unstable at a specific ratio of Na+, Ca+. If the concentration of Ca2+ ions is rapidly raised, the emulsion type is reversed, and the oil-in-water emulsion becomes a water-in-oil emulsion.
Identification of Emulsion
There are several methods for determining if an emulsion is an oil-in-water or a water-in-oil emulsion. The following are the characteristics of an emulsion.
- Dye test: The emulsion is shaken with an oil-soluble colour. It is an oil-in-water type emulsion if colour is visible while gazing at a drop of the emulsion. A water-in-oil type is one in which the entire background is coloured.
- Dilution test: To the emulsion, add water. If the emulsion can be diluted with water, water serves as the dispersion medium, and the emulsion is an oil-in-water emulsion. If the oil isn't diluted, it functions as a dispersion medium, and the result is a water-in-oil emulsion.
- Conductivity test: Add a small amount of an electrolyte (Example: KCl) to the emulsion. If this makes the emulsion electrically conducting, then water is the dispersion medium. If water is not in the dispersed phase.
Relationship Between Concentration and Appearance
The interface is a border that exists between the dispersed and continuous phases. Because the phase interphases present in the emulsion scatter light at different wavelengths, the emulsions have a hazy look.
The emulsion's colour is determined by its concentration. When all light is distributed evenly, emulsions appear white. Low-wavelength light is dispersed more in dilute emulsions, causing the emulsion to look blue in colour. The "Tyndall Effect" is the name given to this phenomenon. The colour will be warped to substantially longer wavelengths and seem more yellow if the emulsion is concentrated enough.
The system appears translucent in colour when particular kinds of emulsions, such as nano-emulsions and micro-emulsions, are used. This attribute arises from the fact that light waves are only scattered by droplets whose diameters exceed one-quarter of the wavelength of the incident light. These systems have a translucent appearance because the particle size is less than 100 nm.
Properties of Emulsion
- Emulsions exhibit all of the properties of a colloidal solution, including Brownian movement, Tyndall effect, and electrophoresis.
- The addition of electrolytes containing polyvalent metal ions coagulates the globules, demonstrating their negative charge.
- In emulsions, the size of the dispersed particles is bigger than in sols. It has a range of 1000 to 10,000 Ă. The size, on the other hand, is less than that of particles in suspensions.
- By heating, centrifuging, freezing, and other means, emulsions can be separated into two liquids. Demulsification is the term for this procedure.
Emulsifier / Emulsifying agent
To comprehend this, we must first comprehend the merging process. Coalescing occurs when identical particles in an emulsion join together to produce larger, bulkier particles, causing the dispersed phase and dispersion medium to separate.
Emulsifiers act as a physical barrier between the dispersed phase and the dispersion medium, preventing coalescence. Emulsifiers, like soap, have both a hydrophilic and a hydrophobic end, as we've seen. As a result, they can cling to both polar and non-polar materials. Consider sodium stearate as an example.
C17H35COO-Na can be represented as:
When added to an o/w emulsion, C17H35COO– molecules surround the oil droplet, with their non-polar tails/hydrophobic end (the hydrocarbon chain) extending into the oil and their polar heads/hydrophilic end (the carboxylate ion) facing the water, as seen in the picture.
The oil (dispersed phase) and water have a stronger adhesive force as a result of this arrangement (dispersion medium). This newly developed adhesive force will be greater than the cohesive force between oil and oil, as well as the cohesive force between water and water. As a result, oil particles will be less likely to clump together to produce larger particles. This helps to keep the emulsion stable by preventing coalescence.
These are compounds that are added to emulsions for the aim of stabilization. The following are the many features of emulsifiers:
- They are compounds that have both a hydrophilic (polar) and a hydrophobic (non-polar) end (non-polar).
- Both water and oil are soluble in them.
- Emulsifiers produce a layer between the dispersed phase and the dispersion medium, preventing the dispersed phase particles from clumping together and separating out.
- Emulsifiers come in a variety of forms, including cationic, anionic, and non-polar.
- The ratio of water and oil in an emulsion determines whether it is an oil-in-water or a water-in-oil emulsion. On the other hand, it is dependent on which of the two liquids can emulsify the emulsifier to a greater amount.
- If the emulsifier is more water-soluble, the water serves as the dispersion medium, while the oil serves as the dispersed phase, resulting in an oil in water emulsion.
- If the emulsifier is more soluble in oil, the oil serves as the dispersion medium, while the water serves as the dispersed phase.
Emulsification Theories
There are multiple theories that accompany the process of emulsification because it involves several processes and mechanisms (both chemical and physical).
- Surface tension theory: This theory defines emulsification as a process that occurs when the interfacial tension between two phases is reduced.
- Repulsion theory: The emulsifying agent generates a film over one phase, which leads to the production of globules, according to this idea. The repulsive force that exists between these chemicals helps them stay suspended in the dispersion medium.
Applications of Emulsions
- Ore concentration in metallurgy
- In the field of medicine
- Soap's cleaning action
- Emulsification is used to digest lipids in the colon.
- Milk is a fat-in-water emulsion that is an important part of our nutrition.
Sample Questions
Question 1: Define Emulsion.
Answer :
"Colloidal solutions in which both the dispersed phase and the dispersion medium are liquids are known as emulsions."
Question 2: Explain the properties of emulsions.
Answer :
Properties of Emulsion
- Emulsions exhibit all of the properties of a colloidal solution, including Brownian movement, Tyndall effect, and electrophoresis.
- The addition of electrolytes containing polyvalent metal ions coagulates the globules, demonstrating their negative charge.
- In emulsions, the size of the dispersed particles is bigger than in sols. It has a range of 1000 to 10,000 Ă. The size, on the other hand, is less than that of particles in suspensions.
- By heating, centrifuging, freezing, and other means, emulsions can be separated into two liquids. Demulsification is the term for this procedure.
Question 3: Explain how to reduce sedimentation and creaming in emulsions.
Answer :
Sedimentation is the downward movement of particles, whereas creaming is the upward movement of dispersed droplets relative to the continuous phase. The factors that impact creaming rate are comparable to those that determine sedimentation rate. Stokes' law states that
v = (d(ρ-ρ0)g) / 18η0
Question 4: Explain emulsifying agent.
Answer :
These are compounds that are added to emulsions for the aim of stabilization. The following are the many features of emulsifiers:
- They are compounds that have both a hydrophilic (polar) and a hydrophobic (non-polar) end (non-polar).
- Both water and oil are soluble in them.
- Emulsifiers produce a layer between the dispersed phase and the dispersion medium, preventing the dispersed phase particles from clumping together and separating out.
- Emulsifiers come in a variety of forms, including cationic, anionic, and non-polar.
- The ratio of water and oil in an emulsion determines whether it is an oil-in-water or a water-in-oil emulsion. On the other hand, it is dependent on which of the two liquids can emulsify the emulsifier to a greater amount.
- If the emulsifier is more water soluble, the water serves as the dispersion medium, while the oil serves as the dispersed phase, resulting in an oil in water emulsion.
- If the emulsifier is more soluble in oil, the oil serves as the dispersion medium, while the water serves as the dispersed phase.
Question 5: How to prepare Emulsion.
Answer :
Emulsions are made by vigorously churning a mixture of the necessary oil and water with a high-speed mixer or ultrasonic vibrators. Simple mechanical stirring results in unstable emulsions. Oil and water have a tendency to separate. A suitable stabilizing agent is usually added to achieve a stable emulsion. Emulsifier or emulsifying agent is the name of the stabilizing ingredient. In the beginning, the emulsifier is combined with the oil and water.
Soaps, detergents, long-chain sulphonic acid, and lyophilic colloids such as gelatin, albumin, and casein are examples of compounds that can operate as emulsifiers.
Similar Reads
Chapter 1 The Solid State
A solid state is simply one of the states of matter. One of the many different states of matter is solid. Solids have a distinct volume, mass, and shape. Solids differ from liquids and gases in that they exhibit unique characteristics. Â These solid states or shapes depending on how the particles are
7 min read
In crystalline solids, their constituent particles have a definite arrangement in three dimensions. The positions of these particles in the crystal relative to each other are usually represented by points. The dispensation of these unendurable sets of points is called a space lattice. The positions
7 min read
We are mostly surrounded by solids, which we use more frequently than liquids and gases. We require solids with a wide range of properties for various applications. These properties are determined by the nature of the constituent particles and the binding forces that exist between them. As a result,
5 min read
In the formation of crystals, the constituent particles (atoms, ions, or molecules) are closely intertwined. A tightly packed arrangement is one in which maximum available space is occupied by leaving minimum free space. This corresponds to the condition of the maximum possible density. The closer t
7 min read
A crystal lattice is made up of a relatively large number of unit cells, each of which contains one constituent particle at each lattice point. A three-dimensional structure with one or more atoms can be thought of as the unit cell. Regardless of the packing method, there are always some empty space
10 min read
Matter can exist in broadly three states named solids, liquids, and gases. Solids are those substances that have short intermolecular forces between them that keep molecules (atoms or ions) closely packed. They have definite mass, volume, and shape. Their intermolecular forces are strong and intermo
11 min read
Chapter 3 Electrochemistry
Chapter 4 Chemical Kinetics
Chapter 5 Surface Chemistry
Adsorption is the adhesion of atoms, ions, or molecules to a surface from a gas, liquid, or dissolved solids. This process forms an adsorbate film on the adsorbent's surface. This differs from absorption, which occurs when a fluid dissolves or permeates a liquid or solid. Adsorption is a surface phe
7 min read
Adsorption and Absorption are the two important processes of physical chemistry that help in various industrial processes to manufacture and purification of various chemical compounds. While the two terms sound almost similar there exists a significant difference between them. Adsorption is a surfac
10 min read
The mechanism of absorption of elements in plants involves the absorption of mineral elements from the soil and transporting them to different plant parts. This mechanism of absorption of elements or minerals by plants includes two phases: passive absorption and active absorption The roots actively
8 min read
The phenomenon of the congregation of the highest concentration of any molecular species on a surface than the agglomeration of a solid (or liquid) is called adsorption. It deals with the chemistry at the range which separates two bulk phases. This range is also known as surface and interface. â–³H an
6 min read
Heinrich Kayser, a German physicist, coined the term adsorption in 1881. Surface chemistry is concerned with the phenomena that occur at surfaces or interfaces. Solid-gas or solid/gas can be used to represent the interface between a solid and a gas, for example. Because the gases are completely misc
7 min read
Catalysis in Chemistry is defined as the process in which the rate of the reaction is influenced by the presence of some specific substance. These specific substances are called Catalysts. The catalyst is never consumed during the chemical reaction. A catalyst changes the activation energy of the re
8 min read
Zeolites are microporous three-dimensional crystalline solids of aluminium silicate. Zeolites contain small, fixed-size pores in them that allow small molecules to pass through but not larger molecules; this is why they are sometimes referred to as molecular sieves. Zeolites occur naturally, but the
8 min read
Catalysis is a phenomenon in which the rate of a reaction is changed by using a substance known as a catalyst. A catalyst is a substance that is used to change the rate of a reaction. Enzymes are a type of catalyst that is responsible for facilitating and speeding up many important biochemical react
7 min read
Solutions are systems that are homogeneous. When sand is mixed with water, it forms a suspension that settles over time. Colloidal dispersions, or simply colloids, are a large group of systems that exist between the two extremes of suspensions and solutions. Colloids are a combination of two substan
7 min read
Before we get into the specifics of how we classify colloids, it's important to first define what a colloid is. A colloid is a material made up of big molecules mixed with another substance in chemistry. This encompasses a wide range of items, many of which you may already have in your house, which
8 min read
Solutions are systems that are homogeneous. When sand is mixed with water, it forms a suspension that settles over time. Colloidal dispersions, or simply colloids, are a large group of systems that exist between the two extremes of suspensions and solutions. A colloid is a heterogeneous system in wh
7 min read
Colloidal solutions, also known as colloidal suspensions, are a mixture in which the compounds are suspended in a fluid in a regular pattern. A colloid is a very small particle that is consistently distributed throughout another substance. Colloidal systems can exist in all three phases of matter: g
8 min read
Did you know that "emulsion" comes from the Latin word "mulgeo," which meaning "to milk"? Milk is a fat-water emulsion containing a variety of additional ingredients. But what precisely are Emulsions, and what role do they play in our daily lives and in the workplace? Emulsions are combinations of t
10 min read
Chapter 6 General Principles and Processes of Isolation of Elements
Metals are minerals or substances that occur naturally beneath the Earth's surface. The majority of metals are lustrous or glossy. Metals are inorganic, which implies they were formed from non-living substances. Metals are typically found in the form of metal ores, which are linked to one another an
6 min read
Metallurgy is the process of extracting pure metals from their ores. On the basis of their reactivity, methods are utilised to extract metals from their ores. Electrolysis is used to extract highly reactive metals from their ores, whereas calcination, roasting, and reduction processes are used to re
6 min read
All matter found on Earth is made up of different elements. These elements are distributed in the three main parts of the Earth, the atmosphere, the hydrosphere, and the lithosphere. The main source of most of these elements is the lithosphere. Elements are broadly divided into metals and non-metals
7 min read
The Gibbs equation enables us to predict the spontaneity of a process based on enthalpy and entropy measurements. The Ellingham diagram was developed by H.G.T. Ellingham to predict the spontaneity of metal oxide reduction. One of the most straightforward graphical representations of Thermodynamic st
7 min read
In metallurgy, refining is extremely important. In nature, any metal that has been taken from its ore is usually impure. Crude metal refers to the impure metal that is removed. Refining is the process of eliminating impurities from metals in order to achieve high-purity metals. Impurities are remove
7 min read
Minerals and ores abound in the earth's crust. Some ores have proven to be a valuable resource for humanity. Iron, for example, derived from iron ore (Hematite), laid the groundwork for the industrial revolution. Aluminium, on the other hand, was a critical strategic resource for aviation during Wor
7 min read
The earth's crust is abundant in minerals and ores. Some ores have proven to be a valuable resource for humanity. Iron, for example, derived from iron ore (Hematite), laid the groundwork for the industrial revolution. Aluminum, on the other hand, was a critical strategic resource for aviation during
8 min read
Chapter 7 p -Block Elements
Some metals, all nonmetals, and metalloids are among these elements. Normal or representative elements are s-block and p-block elements combined (except zero group elements). Each periodic table period concludes with a member of the zero group (18th group), i.e. a noble gas with a closed shell ns2np
7 min read
The contemporary periodic table, devised by Dimitri Mendeleev, lists all known elements according to their atomic number, which is unique to each element. The periodic table was created as a result of such an arrangement. The items with comparable qualities were grouped together in a column. Nitroge
6 min read
Nitrogen is the lightest element in Periodic Table Group 15, also known as the pnictogens. Dinitrogen, a colourless and odourless diatomic gas with the formula N2, is formed when two atoms of the element join together at STP. Dinitrogen is the most abundant uncombined element, accounting for around
6 min read
Ammonia (NH₃) is a colorless gas with a sharp, pungent odor. It is a compound of nitrogen and hydrogen and plays a crucial role in both the industrial sector and biological processes. Let's learn about ammonia in detail, including its structure, properties and uses. AmmoniaAmmonia is nitrogen and hy
7 min read
Nitrogen combines with oxygen to generate nitrogen oxides in a variety of forms. Its oxides have distinct oxidation states, ranging from +1 to +5. Nitrogen oxides with a greater oxidation state are more acidic than those with a lower oxidation state. Nitrogen Oxides are a combination of gases that i
9 min read
The final electron of a P block element enters one of the three p-orbitals of the shell in which it is found. There are six groups of p-block elements since a p-subshell has three degenerate p-orbitals, each of which may hold two electrons. Because of their tendency to lose an electron, P block elem
5 min read
Phosphorus is required for life, mostly through phosphates, which are molecules that contain the phosphate ion. Phosphates are found in DNA, RNA, ATP, and phospholipids, which are all complex molecules that are required by cells. Phosphate was first found in human urine, and bone ash was a significa
8 min read
Oxoacids are acids that contain oxygen. Phosphorus is one such element that can be used to create a variety of oxoacids. H3PO4, H3PO3, and other common oxyacids The phosphorus atom is tetrahedrally surrounded by other atoms in phosphorus oxoacids. In general, it is obvious that these acids have at l
6 min read
Chalcogens are the Group 16 elements of the modern periodic table consisting of 5 elements oxygen, sulphur, selenium, tellurium and polonium. The elements in this group are also known as chalcogens or ore-forming elements because many elements can be extracted from sulphide or oxide ores. The chalco
9 min read
Oxygen is a member of the periodic table's chalcogen group, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements and other compounds. Oxygen is the most abundant element on Earth, and it is the third-most abundant element in the universe after hydrogen and
5 min read
Oxides are binary chemicals generated when oxygen reacts with other elements. In nature, oxygen is extremely reactive. They create oxides when they react with metals and nonmetals. Based on their acid-base properties, oxides are classified as neutral, amphoteric, basic, or acidic. An acidic oxide is
5 min read
Ozone is too reactive to stay in the atmosphere at sea level for long. It is formed from atmospheric oxygen in the presence of sunlight at a height of about 20 kilometres. This ozone layer shields the earth's surface from an excess of ultraviolet (UV) radiation. It is an unstable, blue, diamagnetic
7 min read
The tenth most prevalent element in the universe is sulphur. It can also be found in the form of sulphide in a variety of meteorites. The existence of a sulphur element in molten, gaseous, and solid states gives the Jupiter moon lo its unusual colours. Sulphur is the sixth most prevalent element on
7 min read
The p-block, which spans groups 13 to 18, is located on the right side of the normal periodic table. Their electrical configuration is ns2 np1–6 in general. Despite being the first element in group 18, helium is not part of the p-block. Except for the first row, each row in the table has six p-eleme
8 min read
Oxoacids are oxygen-containing acids. Many oxoacids, such as H2SO4, H2SO3, and others, are known to be formed by sulphur. When sulphur is coordinated to oxygen, it forms a tetrahedral structure in oxoacids. Sulfur oxoacids are sulphur, oxygen, and hydrogen-containing chemical compounds. Sulfuric aci
6 min read
Sulfuric Acid or Sulphuric Acid is a mineral acid consisting of one Sulfur, four Oxygen, and two Hydrogen atoms. The chemical or molecular formula of Sulfuric Acid is H2SO4. Sulfuric Acid is one most important commercially used chemicals. It is also known as Mattling acid or Hydrogen Sulfate or Vitr
8 min read
The Halogens are the elements in the periodic table of Group 17 of the periodic table. Fluorine, chlorine, bromine, and iodine are examples of reactive nonmetals. Halogens are nonmetals that are extremely reactive. These elements have a lot in common in terms of properties. Group 17 elements are kno
8 min read
Chlorine is a chemical element that is represented by the symbol Cl. Chlorine is present in the 17th Group (Halogen Group) and 3rd Period of the Periodic table. Chlorine is the second lightest halogen that lies between Fluorine and Bromine in the halogen group. Chlorine is a yellow-green, pungent-sm
6 min read
As a hydrogen halide, the compound hydrogen chloride has the chemical formula HCl. It is a colourless gas at ambient temperature that emits white fumes of hydrochloric acid when it comes into contact with air-water vapour. In technology and industry, hydrogen chloride gas and hydrochloric acid are c
7 min read
The elements of Group 17 from top to bottom are fluorine, chlorine, bromine, iodine, and astatine. They are referred to as halogens because they create salt. This group's members are very similar to one another. They have a consistent pattern of physical and chemical features. The valence shell of e
7 min read
The p-block elements are known to be those elements in which the electron enters in one of the three orbitals of the p-block. There are 6 groups of p-block elements. The properties of p-block elements are that they are shiny and are good conductor of heat and electricity since they have free electro
6 min read
The group's members have eight electrons in their outermost orbit (except helium which has two electrons). As a result, they have a stable configuration. Group 18 elements are gases that are chemically unreactive, meaning they do not form many compounds. Be a result, the elements are referred to as
7 min read
Chapter 8 d - and f - Block Elements
Chapter 9 Coordination Compounds
Chapter 10 Haloalkanes and Haloarenes