CBSE Class 9th Maths Revision Notes is an important phase of student’s life when they’re at a turning point in their life. The reason being class 9 is the foundation level to succeed in class 10. As you know, students must complete Class 9 in order to sit for Class 10 board examinations. Also, it lays the groundwork for the following classes. A kid who is well-versed in class 9 topics would find it simpler to perform well in competitive exams. Math and science are two subjects that demand a lot of practice to score in class 9. Hence we brought out the best from our resource treasury - CBSE Class 9 Maths Notes. GeeksforGeeks specially curated NCERT Notes for Class 9 Maths, compiled by experts.
Class 9th Maths Notes cover some more important topics like Experimental Probability, Volumes of Cubes and Cuboids, Mean, Median, Mode, Range, etc. Our experts have also covered Class 9 Maths Solutions like NCERT Solutions for Class 9 Maths, and RD Sharma Class 9 Solutions.

CBSE Class 9th Maths Revision Notes Chapters List (2023-2024)
Class 9th Maths Revision Notes Chapters List |
---|
Chapter 1: Number System | Chapter 9: Areas of Parallelograms and Triangles |
Chapter 2: Polynomials | Chapter 10: Circles |
Chapter 3: Coordinate Geometry | Chapter 11: Constructions |
Chapter 4: Linear Equations in two variables | Chapter 12: Heron's Formula |
Chapter 5: Introduction to Euclid’s Geometry | Chapter 13: Surface Areas and Volumes |
Chapter 6: Lines and Angles | Chapter 14: Statistics |
Chapter 7: Triangles | Chapter 15: Probability |
Chapter 7: Quadrilateral | |
Deleted Chapters/Topics from NCERT Class 9th Maths Textbook (2023-2024):
The most recent CBSE Class 9th Mathematics syllabus has been changed and reduced by 30% for the upcoming annual assessment in the academic year 2023-2024, you can find the list of all deleted chapters/topics in the table below:
Chapters | Deleted Topics/Chapter |
---|
Chapter 1: Number Systems | - 1.4 Representing real numbers on the number line
|
Chapter 2: Polynomials | |
Chapter 3: Coordinate Geometry | - 3.3 Plotting a point in the plane if its coordinates are given
|
Chapter 4: Linear Equations in Two Variables | - 4.4 Graph of linear equations in two variables
- 4.5 Equations of lines parallel–x–axis and y–axis
|
Chapter 5: Introduction– Euclidean Geometry | - 5.3 Equivalent versions of Euclid’s fifth postulateQuadrilaterals
|
Chapter 6: Lines and Angles | - 6.5 Parallel lines and a transversal
- 6.7 Angle sum property of a triangle
|
Chapter 7: Triangles | - 7.4 Inequalities in triangles
|
Chapter 8: Quadrilaterals | - 8.1 Introduction
- 8.2 Angle sum property of a quadrilateral
- 8.3 Types of Quadrilaterals
- 8.5 Another condition for a Quadrilateral to be a parallelogram
|
Chapter 9: Areas of Parallelogram and Triangles | |
Chapter 10: Circles | - 10.1 Introduction
- 10.2 Circles and its related terms: Review
- Circle through three points
|
Chapter 11: Construction | |
Chapter 12: Heron’s Formula | - 12.1 Introduction
- 12.3 Application of Heron’s formula in finding areas of quadrilaterals
|
Chapter 13: Surface Area and Volume | - 13.1 Introduction
- 13.2 Surface area of a cuboid and cube
- 13.3 Surface area of a right circular cylinder
- 13.6 Volume of cuboid
- 13.7 Volume of cylinder
|
Chapter 14: Statistics | - 14.1 Introduction
- 14.2 Collection of data
- 14.3 Presentation of data
- 14.5 Measure of central tendency
- 14.6 Summary
|
Chapter 15: Probability | |
Chapter 1: Number Systems
The numeral or number system is the combination of natural, integers, rational, irrational, and real numbers. This lesson covers the entire concepts of the numeral system and its types, representation on the number line, laws of rational exponents, and integral powers. To simplify the concept of number systems, the technique of portraying numbers on a number line using certain rules and symbols is known as a number system. A number line is a straight-line representation of integers with a set spacing between them. The Number System is used to do mathematical computations ranging from intricate scientific calculations to calculate how many chocolates are left in the box.
The major topics covered in the Number systems chapter in Class 9 are the Representation of natural numbers, integers, rational numbers on the number line, Rational numbers as recurring/ terminating decimals, and Operations on real numbers. Some topics which have great importance in further chapters of Class 9 are the Rationalization of real numbers and Laws of exponents for real numbers
CBSE Class 9th Maths Revision Notes Chapter 1 Number Systems |
---|
|
|
- Decimal Representation of Rational Numbers
|
|
- Representation of Numbers on Number Line
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 1 |
|
Important rules that are used in CBSE Class 9 Maths Revision Notes Chapter 1 Number Systems are:
- √ab = √a × √b
- √(a/b)= √a/√b
- (√a + √b) × (√a - √b) = a−b
- (a + √b) × (a − √b) = a2 −b
- (√a+√b)2 =a2 + 2√ab +b
- ap × bq = (ab)p+q
- (ap)q = apq
- ap / aq = (a)p-q
- ap / bp = (ab)p
Chapter 2: Polynomials
A polynomial expression is made up of variables, which are also known as indeterminates and coefficients in mathematics. The coefficients involve operations such as subtraction, addition, non-negative integer variable exponents, and multiplication. Both algebraic expressions and polynomials in mathematics are made up of variables and constants, as well as arithmetic operations. The sole difference is that algebraic expressions include irrational numbers in their powers.
Topics covered in Class 9 Polynomial Chapters are the basics of polynomials in one variable (including the Coefficients of a polynomial, terms of a polynomial and zero polynomial), Degree of a polynomial and Types of Polynomials-Monomials, binomials, trinomials. Some important topics covered in this chapter are Factors and multiples, Zeros of a polynomial, and Factorization using the Factor Theorem.
CBSE Class 9th Maths Revision Notes Chapter 2 Polynomials |
---|
|
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 2 |
|
Here is the list of the important theorems learned in CBSE Class 9th Maths Revision Notes Chapter 2 Polynomials:
- Remainder Theorem: If p(x) has the degree greater than or equal to 1 and p(x) when divided by the linear polynomial x – a will give the remainder as p(a).
- Factor Theorem: x – a will be the factor of the polynomial p(x), whenever p(a) = 0. The vice-versa also holds true every time.
CBSE Class 9th Maths Revision Notes Cover the following topics:
Chapter 3: Coordinate Geometry
Coordinate geometry is a part of geometry where the position of the points on the plane is described with the help of an ordered pair of numbers called coordinates.
Coordinate geometry is important because it connects geometry with algebra using line graphs and curves. Because it allows us to find points on any plane, coordinate geometry is helpful in mathematics. It is also used in trigonometry, calculus, and other fields. Learn about the Cartesian coordinate system, coordinate points, how to plot points on coordinate axes, quadrants with signs, and other concepts in coordinate geometry.
CBSE Class 9th Maths Revision Notes Chapter 3 Coordinate Geometry |
---|
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 3 |
|
Important Conclusions from CBSE Class 9th Maths Revision Notes Chapter 3 Coordinate Geometry are:
- The horizontal line is known as the x-axis and the vertical line is called the y-axis.
- The coordinates of a point are in the form of (+, +) in the first quadrant, (–, +) in the second quadrant, (–, –) in the third quadrant, and (+, –) in the fourth quadrant; where + and – denotes the positive and the negative real number respectively.
- The coordinates of the origin are (0, 0) and thereby it gets up to move in the positive and negative numbers.
Chapter 4: Linear Equations in Two Variables
Any equation which can be defined in the form ax + by + c = 0, where a, b, and c are real numbers and a and b are not both zero, is called a linear equation in two variables. This chapter on Linear Equations in Two Variables is an essential subject in Mathematics since it allows us to define physical relationships between two variables, compute rates, perform conversions, and make predictions, among other things.
Students should pay special attention while solving and practicing the questions in this chapter because the majority of the questions in their examinations will require some experience in this area.
CBSE Class 9 Maths Revision Notes Chapter 4 Linear Equations in Two Variables |
---|
|
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 4 |
|
Important formulas and identities in CBSE Class 9 Maths Revision Notes Chapter 4- Linear Equations in Two Variables are:
- (a + b)2 = a2 + 2ab + b2
- (a – b)2 = a2 – 2ab + b2
- (a + b) (a – b) = a2 -b2
- (x + a) (x + b) = x2 + (a + b) x + ab
- (x + a) (x – b) = x2 + (a – b) x – ab
- (x – a) (x + b) = x2 + (b – a) x – ab
- (x – a) (x – b) = x2 – (a + b) x + ab
- (a + b)3 = a3 + b3 + 3ab (a + b)
- (a – b)3 = a3 – b3 – 3ab (a – b)
- (x + y + z)2 = x2 + y2 + z2 + 2xy +2yz + 2xz
- (x + y – z)2 = x2 + y2 + z2 + 2xy – 2yz – 2xz
- (x – y + z)2 = x2 + y2 + z2 – 2xy – 2yz + 2xz
- (x – y – z)2 = x2 + y2 + z2 – 2xy + 2yz – 2xz
- x3 + y3 + z3 – 3xyz = (x + y + z) (x2 + y2 + z2 – xy – yz -xz)
- x2 + y2 = 1212 [(x + y)2 + (x – y)2]
- (x + a) (x + b) (x + c) = x3 + (a + b + c)x2 + (ab + bc + ca)x + abc
- x3 + y3 = (x + y) (x2 – xy + y2)
- x3 – y3 = (x – y) (x2 + xy + y2)
- x2 + y2 + z2 – xy – yz – zx = 1212 [(x – y)2 + (y – z)2 + (z – x)2]
Chapter 5: Introduction to Euclid's Geometry
Euclidean geometry is the branch of geometry that deals with the study of geometrical shapes and figures based on different axioms and theorems. This study provides a brief explanation for flat surfaces. This chapter is the introduction to Euclid for Class 9 students.
This chapter is all about Euclid’s method of formalizing observed phenomena into rigorous Mathematics with definitions, axioms, and postulates. Also includes the five postulates of Euclid, Equivalent versions of the fifth postulate, and a Representation of the relationship between axiom and theorem.
CBSE Class 9 Maths Revision Notes Chapter 5 Introduction to Euclid Geometry |
---|
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 5 |
|
Important rules from CBSE Class 9 Maths Revision Notes Chapter 5 Introduction to Euclid's Geometry:
- Axioms: The basic facts which are taken for granted without proof are called axioms. Some of Euclid's axioms are:
- Things which are equal to the same thing are equal to one another.
- If equals are added to equals, the wholes are equal.
- If equals are subtracted from equals, the remainders are equal.
- Things which coincide with one another are equal to one another.
- The whole is greater than the part.
- Postulates: Axioms are the general statements, postulates are the axioms relating to a particular field. Euclid's five postulates are.
- A straight line may be drawn from anyone point to any other point.
- A terminated line can be produced indefinitely.
- A circle can be drawn with any center and any radius.
- All right angles are equal to one another.
- If a straight line falling on two straight lines makes the interior angles on the same side of it taken together less than two right angles, then the two straight lines, if produced indefinitely meet on that side on which the angles are less than two right angles.
Chapter 6: Lines and Angles
In geometry, Lines and Angles are defined as figures that are made up of infinite points extending indefinitely in both directions. Lines are straight and have length and breadth, while an angle is a figure from which two rays emerge from a common point.
To define it in simpler words, a line is defined as a row of closely spaced dots that spans in two directions indefinitely. It just has one dimension, which is its length. A line can be represented by a horizontal mark written on a sheet of paper. An angle is a figure formed by two rays that intersect at a shared terminus. A protractor is used to measure them in degrees. Lines and angles are present in all geometry forms.
This chapter majorly includes the basics of Lines and Angles and Types of angles. Also include important properties and theorems like the Angle sum property, etc.
CBSE Class 9 Maths Revision Notes Chapter 6 Lines and Angles |
---|
|
|
- Parallel Lines and a Transversal
- Corresponding Angles
- Alternate Interior Angles
- Alternate Exterior Angles
- Co-Interior Angles
- Sum of Co-interior angles is supplementary
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 6 |
|
Important definitions from CBSE Class 9 Maths Revision Notes Chapter 6 Lines and Angles are:
- Acute angle: An acute angle measures between 0° and 90°.
- Right angle: A right angle is exactly equal to 90°.
- Obtuse angle: An angle greater than 90° but less than 180°.
- Straight angle: A straight angle is equal to 180°.
- Reflex angle: An angle that is greater than 180° but less than 360° is called a reflex angle.
- Complementary angles: Two angles whose sum is 90° are called complementary angles. Let one angle be x, then its complementary angle is (90°−x).
- Supplementary angles: Two angles whose sum is 180° are called supplementary angles. Let one angle be x, then its supplementary angle is (180°−x).
- Adjacent angles: Two angles are Adjacent when they have a common side and a common vertex (corner point) and don't overlap.
- Linear pair: A linear pair of angles is formed when two lines intersect. Two angles are said to be linear if they are adjacent angles formed by two intersecting lines. The measure of a straight angle is 180°, so a linear pair of angles must add up to 180°.
- Vertically opposite angles: Vertically opposite angles are formed when two lines intersect each other at a point. Vertically opposite angles are always equal.
Chapter 7: Triangles
Geometrically, a triangle is defined as a three-sided polygon consisting of three edges and three vertices. The most important and applied property of a triangle is its Angle sum property which means the sum of the internal angles of a triangle is equal to 180 degrees only.
This Chapter on Triangles explained the Congruence and various Properties of triangles. This also includes some important theorems for triangles, along with inequalities in a triangle.
CBSE Class 9 Maths Revision Notes Chapter 7 Triangles |
---|
|
- Congruence of Triangles
- SSS Congruence Rule
- SAS Congruence Rule
- ASA Congruence Rule
- AAS Congruence Rule
- RHS Congruence Rule
|
- Why are SSA and AAA congruency rules not valid?
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 7 |
|
Important rules covered in CBSE Class 9 Maths Revision Notes Chapter 7 Triangles are:
Congruence Rules: Here is the list of some important congruence rules of triangles,
- Side angle side (SAS) Congruence
- Angle Side Angle (ASA) Congruence
- Angle angle side (AAS) Congruence
- Side side side (SSS) Congruence
- Right-angle Hypotenuse Side (RHS) Congruence
Chapter 8: Quadrilateral
A quadrilateral is a plane geometrical figure which has four sides and four corners or vertices. Typically, quadrilaterals are rectangles, squares, trapezoids, and kites or irregular and uncharacterized figures with four sides.
The topics covered in this chapter will help students to learn all the concepts of Quadrilateral thoroughly, They are the Angle sum property of a Quadrilateral, types of quadrilaterals, properties of a parallelogram, and the mid-point theorem.
CBSE Class 9 Maths Revision Notes Chapter 8 Quadrilateral |
---|
|
|
|
- Properties of Parallelogram
- Opposite sides of a parallelogram are equal
- Opposite angles in a parallelogram are equal
- Diagonal of a Parallelogram divides it into two congruent triangles
- Diagonals of a Parallelogram bisect each other
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 8 |
|
Important properties that are covered in CBSE Class 9 Maths Revision Notes Chapter 8 Quadrilateral are:
- The Sum of all angles of a quadrilateral is 360°.
- A diagonal of a parallelogram divides it into two congruent triangles.
- In a parallelogram,
- diagonals bisect each other.
- opposite angles are equal.
- opposite sides are equal
- Diagonals of a square bisect each other at right angles and are equal, and vice-versa.
- A line through the mid-point of a side of a triangle parallel to another side bisects the third side. (Midpoint theorem)
- The line segment joining the mid-points of two sides of a triangle is parallel to the third side and equal to half the third side.
- In a parallelogram, the bisectors of any two consecutive angles intersect at a right angle.
- If a diagonal of a parallelogram bisect one of the angles of a parallelogram it also bisects the second angle.
- The angle bisectors of a parallelogram form a rectangle.
- Each of the four angles of a rectangle is the right angle.
- The diagonals of a rhombus are perpendicular to each other.
Chapter 9: Areas of Parallelograms and Triangles
The area of a plane figure is described as the amount of the planar surface covered by a closed geometric figure like a rectangle, square, etc. In this chapter, we'll try to strengthen our understanding of the equations for calculating the areas of various figures by looking at relationships between the areas of geometric shapes that have the same base and parallels. This study will also help in the understanding of several findings about 'triangle similarity.'
The important topics covered in this chapter are the area of two or more triangles and parallelograms with the same base between the same parallels and finding the area of triangles that are split by a median as well as the area of congruent figures.
CBSE Class 9 Maths Revision Notes Chapter 9 Parallelogram and Triangles |
---|
|
|
- Theorems
- Parallelograms on the Common Base and Between the Same Parallels
- Triangles on the Common Base and Between the Same Parallels
- Two Triangles Having the Common Base & Equal Areas
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 9 |
|
Important formulas used in CBSE Class 9 Maths Revision Notes Chapter 9 Areas of Parallelograms and Triangles are:
- Area of Parallelogram = Base × Height
- Area of Triangle = 1/2 × Base × Height or 1/2 × Area of Parallelogram
- Area of Trapezium = 1/2 × (Sum of its parallel sides) × Distance between the two parallel side
- Area of Rhombus = 1/2 × Product of its two diagonals
CBSE Class 9 Maths Revision Notes Chapter 9 covers the following topics:
Chapter 10: Circles
Be it a bottle cap or the merry-go-round - the circle is a part of our day-to-day life and is included in everything we saw. But how exactly circle came to be? To explain it in mathematical words, a circle is a geometrical shape that is defined as the locus of points that moves in a plane so that its distance from a fixed point is always constant. This fixed point is the Centre of the circle while the fixed distance from it is called the radius of the circle.
CBSE Class 9 Maths Revision Notes Chapter 10 Circles |
---|
|
|
- Circles and Their Chords
- Theorem of equal chords subtending angles at the center.
- Theorem of equal angles subtended by different chords.
- Perpendicular from the center to a chord bisects the chord.
- A Line through the center that bisects the chord is perpendicular to the chord.
- Circle through 3 points
- Equal chords are at equal distances from the center.
- Chords equidistant from the center are equal.
|
- Angle Subtended by an Arc of a Circle
- The angle subtended by an arc of a circle on the circle and at the center
- Angles in the same segment of a circle.
- The angle subtended by the diameter of the circle
- A line segment that subtends equal angles at two other points
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 10 |
|
Some important properties covered in CBSE Class 9 Maths Revision Notes Chapter 10 Circles are:
Chord: The chord of the circle is a line segment that connects any two locations on a circle. Some important properties of Chords of a circle are:
- The diameter of a circle is defined as a chord that passes across its center.
- A circle's diameter divides it into two equal sections, which are called arcs. A semi-circle is made up of these two arcs.
- If two arcs of a circle have the same degree of measure, they are said to be congruent.
- When two arcs have the same length, their associated chords are likewise the same length.
- The chord is bisected by a perpendicular drawn from the center to the chord of the circle, and vice versa.
- Three non-collinear points are intersected by one and only one circle.
- Equal circle chords are equidistant from the center.
- The line across the centers of two circles intersecting in two points is perpendicular to the common chord.
- An arc's angle at the center of the circle is double the angle it has throughout the rest of the circumference.
- Any two angles in the same circle segment are equal.
- A circle's equal chords form an equal angle at the center.
- The greater chord of a circle is closer to the center than the smaller chord.
- The semicircle has a right angle. At the circle's center, equal chords subtend an equal angle.
Cyclic Quadrilateral: A quadrilateral is said to be cyclic if all of its vertices are on the perimeter of a circle.
- The sum of opposing angles in a cyclic quadrilateral is 180°, and vice versa.
- A cyclic quadrilateral's exterior angle is equal to its inner opposite angle.
CBSE Class 9 Maths Revision Notes Chapter 10 covers the following topics:
Chapter 11: Constructions
Construction helps to understand the approach to constructing different types of triangles for different given conditions using a ruler and compass of required measurements. Constructions are based on Geometry which is the foundation for comprehending fundamental arithmetic principles used in many professions.
Geometry form construction is a necessary ability that necessitates a thorough understanding of their qualities. As a result, students must thoroughly research this subject. The NCERT Solutions Class 9 Maths Chapter 11 Constructions is an excellent resource for learning about this geometry topic. These solutions serve as study aids for students.
CBSE Class 9 Maths Revision Notes Chapter 11 - Constructions |
---|
|
- Basic Construction
- Construction of an Angle Bisector
- Construction of a Perpendicular Bisector of Line
- Construction of Angles
- Construction of an Angle of 60°
- Construction of an Angle of 90°
- Construction of an Angle of 45°
- Construction of an Angle of 75°
|
- Construction of triangles
- Given the base, base angle, and a sum of the other two sides
- Given base(BC), base angle(ABC) and AB-AC
- Given base (BC), base angle (ABC) and AC-AB
- Given the perimeter and two base angles
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 11 |
|
Important constructional rules discussed in CBSE Class 9 Maths Revision Notes Chapter 11 Constructions are:
- Construction of bisector of a line segment
- Construction of bisector of a given angle
- Construction of Equilateral triangle
- Construction of a triangle when its base, sum of the other two sides and one base angle are given
- Construction of a triangle when its base, difference of the other two sides and one base angle are given
- Construction of a triangle of given perimeter and two base angles
Chapter 12: Heron's Formula
In this chapter, a formula called Heron’s formula is introduced which helps to determine the area of the triangle when three sides of it are given. The application of this formula also helps to find the area of other different polygons. Heron’s formula is a useful technique to calculate the area of a triangle when the length of all three sides is given. These Class 9 Maths NCERT Notes Chapter 12 Heron’s Formula will help students to understand this concept in detail.
CBSE Class 9 Maths Revision Notes Chapter 12 Heron's Formula |
---|
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 12 |
|
Important formulas covered in CBSE Class 9 Maths Revision Notes Chapter 12 Heron's Formula are:
- The semi-perimeter of a Triangle, s = (a+b+c)/2
- Area of the triangle = √{s(s−a)(s−b)(s−c)} sq. unit.
Chapter 13: Surface Areas and Volumes
Surface area and volume are the measures calculated for a three-dimensional geometrical shape like a cube, cuboid, sphere, etc. The surface area of any given object is the area occupied by the surface of the object while volume is the amount of space available in an object.
CBSE Class 9 Maths Revision Notes Chapter 13 Surface Areas and Volumes |
---|
- Surface Area and Volume of Cuboid
|
- Surface Area and Volume of Cube
|
- Surface Area and Volume of Cylinder
|
- Surface Area and Volume of Right Circular Cone
|
- Surface Area and Volume of Sphere
|
- Surface Area and Volume of Hemisphere
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 13 |
|
Some important formulas in CBSE Class 9 Maths Revision Notes Chapter 13 Surface Areas and Volumes are:
- TSA of a Cuboid = 2(l x b) +2(b x h) +2(h x l)
- TSA of a Cube = 6a2
- TSA of a Right circular Cylinder = 2πr(h+r)
- TSA of a Right circular Cone = πr(l+r)
- TSA of a Sphere = 4πr2
- CSA of a Cuboid = 2h(l+b)
- CSA of a Cube = 4a2
- CSA of a Right circular Cylinder = 2πrh
- CSA of a Right circular Cone = πrl
- Volume of a Cuboid = l x b x h
- Volume of a Cube = a3
- Volume of a Right circular Cylinder = πr2h
- Volume of a Right circular Cone = 1/3πr2h
- Volume of a Sphere = 4/3πr3
Here, l is the length, b is the breadth, h is the height, r is the radius and a is the side of the respective geometrical figure.
CBSE Class 9 Maths Revision Notes Chapter 13 covers the following topics:
Chapter 14: Statistics
Statistics is the study of the representation, collection, interpretation, analysis, presentation, and organization of data. In other words, it is a mathematical way to collect and summarize data. The representation of data is different along with the frequency distribution.
Students will have a good understanding of the significance of well-organized data, as well as the three measures of central tendency for ungrouped data, namely, mean, median, and mode, from NCERT notes for class 9 Mathematics chapter 14. After studying this topic, students will be able to apply these formulae to a wide range of problems.
CBSE Class 9 Maths Notes - Chapter 14 Statistics |
---|
|
- Frequency Distribution Table
- Ungrouped Frequency Distribution Table
- Grouped Frequency Distribution Table
|
|
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 14 |
|
Some important formulae and terms studied in CBSE Class 9 Maths Revision Notes Chapter 14 Statistics are
- Class mark = (Lower Limit + Upper Limit)/2
- The three central tendencies are measured as:
- Mean (x‾) = Sum of all observations (∑xn) / Total Number of observation (N)
- Median = The median for even number of observation is equal to the middlemost observation whole for the odd number of observation it is equal to value of ((n+1)/2)th observation.
- Mode = It is equal to observation which occurs the most or have the maximum frequency in the given data.
Chapter 15: Probability
Tossing coin yields either an up or a down result, which is easily predicted. But what if you toss two coins at once? The end product might be a head and tail combo. In the latter instance, the correct answer cannot be found, therefore only the probability of a result may be predicted. Probability is the name given to this prediction. Probability is frequently employed in all aspects of daily life, such as sports, weather forecasts, blood tests, statics, etc. In this chapter, we will study probability in-depth.
The Probability in this class includes basic probability theory, which is also used in the probability distribution, to learn the possibility of outcomes for a random experiment and to find the probability of a single event to occur, when the total number of possible outcomes
CBSE Class 9 Maths Revision Notes Chapter 15 Probability |
---|
|
|
|
|
|
- Rolling of Dice Experiment
|
- Sum of Probabilities of Favorable and Unfavourable Events
|
More Resources for CBSE Class 9th Maths Revision Notes Chapter 15 |
|
Important terms used in CBSE Class 9 Maths Revision Notes Chapter 15 Probability are:
- Probability P (E) = Number of favorable outcomes / Total Number of outcomes
- The probability of any event only lies between 1 and 0.
- Trial: It is defined as the set of observations of event in which one or more outcomes are observed.
- Event: It is defined as the collection of observation performed to observe an experiment.
CBSE Class 9 Maths Revision Notes Chapter 15 covers the following topics:
Important Resources for CBSE Class 9th provided by GeeksforGeeks
Similar Reads
CBSE Class 9 Maths Revision Notes
CBSE Class 9th Maths Revision Notes is an important phase of studentâs life when theyâre at a turning point in their life. The reason being class 9 is the foundation level to succeed in class 10. As you know, students must complete Class 9 in order to sit for Class 10 board examinations. Also, it la
15+ min read
Chapter 1: Number System
Number System in Maths
Number System is a method of representing numbers on the number line with the help of a set of Symbols and rules. These symbols range from 0-9 and are termed as digits. Let's learn about the number system in detail, including its types, and conversion. Number System in MathsNumber system in Maths is
13 min read
Natural Numbers | Definition, Examples & Properties
Natural numbers are the numbers that start from 1 and end at infinity. In other words, natural numbers are counting numbers and they do not include 0 or any negative or fractional numbers. Here, we will discuss the definition of natural numbers, the types and properties of natural numbers, as well a
11 min read
Whole Numbers - Definition, Properties and Examples
Whole numbers are a foundational concept in mathematics, encompassing all non-negative integers starting from zero. This set includes numbers like 0, 1, 2, 3, and so on, up to infinity. Unlike integers, whole numbers do not include negative numbers or fractions. Examples of Whole Numbers are 0, 2, 3
9 min read
Prime Numbers | Meaning | List 1 to 100 | Examples
Prime numbers are those natural numbers that are divisible by only 1 and the number itself. Numbers that have more than two divisors are called composite numbers All primes are odd, except for 2. Here, we will discuss prime numbers, the list of prime numbers from 1 to 100, various methods to find pr
13 min read
Rational Numbers
Rational numbers are a fundamental concept in mathematics, defined as numbers that can be expressed as the ratio of two integers, where the denominator is not zero. Represented in the form p/qâ (with p and q being integers), rational numbers include fractions, whole numbers, and terminating or repea
15+ min read
Irrational Numbers- Definition, Examples, Symbol, Properties
Irrational numbers are real numbers that cannot be expressed as fractions. Irrational Numbers can not be expressed in the form of p/q, where p and q are integers and q â 0. They are non-recurring, non-terminating, and non-repeating decimals. Irrational numbers are real numbers but are different from
12 min read
Real Numbers
Real Numbers are continuous quantities that can represent a distance along a line, as Real numbers include both rational and irrational numbers. Rational numbers occupy the points at some finite distance and irrational numbers fill the gap between them, making them together to complete the real line
10 min read
Decimal Expansion of Real Numbers
The combination of a set of rational and irrational numbers is called real numbers. All the real numbers can be expressed on the number line. The numbers other than real numbers that cannot be represented on the number line are called imaginary numbers (unreal numbers). They are used to represent co
6 min read
Decimal Expansions of Rational Numbers
Real numbers are simply the combination of rational and irrational numbers, in the number system. In general, all the arithmetic operations can be performed on these numbers and they can be represented in the number line, also. So in this article let's discuss some rational and irrational numbers an
6 min read
Representation of Rational Numbers on the Number Line | Class 8 Maths
Rational numbers are the integers p and q expressed in the form of p/q where q>0. Rational numbers can be positive, negative or even zero. Rational numbers can be depicted on the number line. The centre of the number line is called Origin (O). Positive rational numbers are illustrated on the righ
5 min read
Operations on Real Numbers
Real Numbers are those numbers that are a combination of rational numbers and irrational numbers in the number system of maths. Real Number Operations include all the arithmetic operations like addition, subtraction, multiplication, etc. that can be performed on these numbers. Besides, imaginary num
9 min read
Rationalization of Denominators
Rationalization of Denomintors is a method where we change the fraction with an irrational denominator into a fraction with a rational denominator. If there is an irrational or radical in the denominator the definition of rational number ceases to exist as we can't divide anything into irrational pa
8 min read
Nth Root
Nth root of unity is the root of unity when taken which on taking to the power n gives the value 1. Nth root of any number is defined as the number that takes to the power of n results in the original number. For example, if we take the nth root of any number, say b, the result is a, and then a is r
6 min read
Laws of Exponents for Real Numbers
Laws of Exponents are fundamental rules used in mathematics to simplify expressions involving exponents. These laws help in solving arithmetic problems efficiently by defining operations like multiplication, division, and more on exponents. In this article, we will discuss the laws of exponent for r
6 min read
Chapter 2: Polynomials
Polynomials in One Variable | Polynomials Class 9 Maths
Polynomials in One Variable: Polynomial word originated from two words âpolyâ which means âmanyâ and the word ânominalâ which means âtermâ. In maths, a polynomial expression consists of variables known as indeterminate and coefficients. Polynomials are expressions with one or more terms with a non-z
7 min read
Polynomial Formula
The polynomial Formula gives the standard form of polynomial expressions. It specifies the arrangement of algebraic expressions according to their increasing or decreasing power of variables. The General Formula of a Polynomial: f(x) = anâxn + anâ1âxnâ1 + ⯠+ a1âx + a0â Where, anâ, anâ1â, â¦, a1â, a0
6 min read
Types of Polynomials (Based on Terms and Degrees)
Types of Polynomials: In mathematics, an algebraic expression is an expression built up from integer constants, variables, and algebraic operations. There are mainly four types of polynomials based on degree-constant polynomial (zero degree), linear polynomial ( 1st degree), quadratic polynomial (2n
9 min read
Zeros of Polynomial
Zeros of a Polynomial are those real, imaginary, or complex values when put in the polynomial instead of a variable, the result becomes zero (as the name suggests zero as well). Polynomials are used to model some physical phenomena happening in real life, they are very useful in describing situation
14 min read
Factorization of Polynomial
Factorization in mathematics refers to the process of expressing a number or an algebraic expression as a product of simpler factors. For example, the factors of 12 are 1, 2, 3, 4, 6, and 12, and we can express 12 as 12 = 1 Ã 12, 2 Ã 6, or 4 Ã 3. Similarly, factorization of polynomials involves expr
10 min read
Remainder Theorem
The Remainder Theorem is a simple yet powerful tool in algebra that helps you quickly find the remainder when dividing a polynomial by a linear polynomial, such as (x - a). Instead of performing long or synthetic division, you can use this theorem to substitute the polynomial and get the remainder d
9 min read
Factor Theorem
Factor theorem is used for finding the roots of the given polynomial. This theorem is very helpful in finding the factors of the polynomial equation without actually solving them. According to the factor theorem, for any polynomial f(x) of degree n ⥠1 a linear polynomial (x - a) is the factor of th
11 min read
Algebraic Identities
Algebraic Identities are fundamental equations in algebra where the left-hand side of the equation is always equal to the right-hand side, regardless of the values of the variables involved. These identities play a crucial role in simplifying algebraic computations and are essential for solving vari
14 min read
Chapter 3: Coordinate Geometry
Chapter 4: Linear equations in two variables
Linear Equations in One Variable
Linear equation in one variable is the equation that is used for representing the conditions that are dependent on one variable. It is a linear equation i.e. the equation in which the degree of the equation is one, and it only has one variable. A linear equation in one variable is a mathematical sta
7 min read
Linear Equation in Two Variables
Linear Equation in Two Variables: A Linear equation is defined as an equation with the maximum degree of one only, for example, ax = b can be referred to as a linear equation, and when a Linear equation in two variables comes into the picture, it means that the entire equation has 2 variables presen
9 min read
Graph of Linear Equations in Two Variables
Linear equations are the first-order equations, i.e. the equations of degree 1. The equations which are used to define any straight line are linear, they are represented as, x + k = 0; These equations have a unique solution and can be represented on number lines very easily. Let's look at linear e
5 min read
Graphical Methods of Solving Pair of Linear Equations in Two Variables
A system of linear equations is just a pair of two lines that may or may not intersect. The graph of a linear equation is a line. There are various methods that can be used to solve two linear equations, for example, Substitution Method, Elimination Method, etc. An easy-to-understand and beginner-fr
8 min read
Chapter 5: Introduction to Euclid's Geometry
Chapter 6: Lines and Angles
Chapter 7: Triangles
Triangles in Geometry
A triangle is a polygon with three sides (edges), three vertices (corners), and three angles. It is the simplest polygon in geometry, and the sum of its interior angles is always 180°. A triangle is formed by three line segments (edges) that intersect at three vertices, creating a two-dimensional re
13 min read
Congruence of Triangles |SSS, SAS, ASA, and RHS Rules
Congruence of triangles is a concept in geometry which is used to compare different shapes. It is the condition between two triangles in which all three corresponding sides and corresponding angles are equal. Two triangles are said to be congruent if and only if they can be overlapped with each othe
10 min read
Theorem - Angle opposite to equal sides of an isosceles triangle are equal | Class 9 Maths
In geometry, an isosceles triangle is a triangle that has two sides of equal length. Sometimes it is specified as having exactly two sides of equal length, and sometimes as having at least two sides of equal length, the latter version thus including the equilateral triangle as a special case. Exampl
4 min read
Triangle Inequality Theorem, Proof & Applications
Triangle Inequality Theorem is the relation between the sides and angles of triangles which helps us understand the properties and solutions related to triangles. Triangles are the most fundamental geometric shape as we can't make any closed shape with two or one side. Triangles consist of three sid
9 min read
Chapter 8: Quadrilateral
Angle Sum Property of a Quadrilateral
Angle Sum Property of a Quadrilateral: Quadrilaterals are encountered everywhere in life, every square rectangle, any shape with four sides is a quadrilateral. We know, three non-collinear points make a triangle. Similarly, four non-collinear points take up a shape that is called a quadrilateral. It
9 min read
Quadrilaterals
Quadrilateral is a two-dimensional figure characterized by having four sides, four vertices, and four angles. It can be broadly classified into two categories: concave and convex. Within the convex category, there are several specific types of quadrilaterals, including trapezoids, parallelograms, re
12 min read
Parallelogram | Properties, Formulas, Types, and Theorem
A parallelogram is a two-dimensional geometrical shape whose opposite sides are equal in length and are parallel. The opposite angles of a parallelogram are equal in measure and the Sum of adjacent angles of a parallelogram is equal to 180 degrees. A parallelogram is a four-sided polygon (quadrilate
10 min read
Rhombus: Definition, Properties, Formula and Examples
A rhombus is a type of quadrilateral with the following additional properties. All four sides are of equal length and opposite sides parallel. The opposite angles are equal, and the diagonals bisect each other at right angles. A rhombus is a special case of a parallelogram, and if all its angles are
7 min read
Trapezium: Types | Formulas |Properties & Examples
A Trapezium or Trapezoid is a quadrilateral (shape with 4 sides) with exactly one pair of opposite sides parallel to each other. The term "trapezium" comes from the Greek word "trapeze," meaning "table." It is a two-dimensional shape with four sides and four vertices. In the figure below, a and b ar
8 min read
Square in Maths - Area, Perimeter, Examples & Applications
A square is a type of quadrilateral where all four sides are of equal length and each interior angle measures 90°. It has two pairs of parallel sides, with opposite sides being parallel. The diagonals of a square are equal in length and bisect each other at right angles.Squares are used in various f
5 min read
Kite - Quadrilaterals
A Kite is a special type of quadrilateral that is easily recognizable by its unique shape, resembling the traditional toy flown on a string. In geometry, a kite has two pairs of adjacent sides that are of equal length. This distinctive feature sets it apart from other quadrilaterals like squares, re
8 min read
Properties of Parallelograms
Properties of Parallelograms: Parallelogram is a quadrilateral in which opposite sides are parallel and congruent and the opposite angles are equal. A parallelogram is formed by the intersection of two pairs of parallel lines. In this article, we will learn about the properties of parallelograms, in
9 min read
Mid Point Theorem
The Midpoint Theorem is a fundamental concept in geometry that simplifies solving problems involving triangles. It establishes a relationship between the midpoints of two sides of a triangle and the third side. This theorem is especially useful in coordinate geometry and in proving other mathematica
6 min read
Chapter 9: Areas of Parallelograms and Triangles